linux-modules-extra-2.6_2.6.26-5_i386.changes is NEW
(new) atl2-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6 on x86
This package depends on the Atheros L2 Ethernet Adapter driver modules for
latest Linux kernel 2.6 on x86 and compatible machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Atheros L2 Ethernet Adapter driver modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Atheros L2 Ethernet Adapter driver modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6 on AMD64
This package depends on the Atheros L2 Ethernet Adapter driver modules for
latest Linux kernel 2.6 on all 64bit single- and multiprocessor AMD and
Intel machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Atheros L2 Ethernet Adapter driver modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Atheros L2 Ethernet Adapter driver modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Atheros L2 Ethernet Adapter driver modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.26-1-486_2.6.26+2.0.5-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6.26 on x86
This package provides the Atheros L2 Ethernet Adapter driver modules for
the Linux kernel version 2.6.26 on x86 and compatible machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.26-1-686-bigmem_2.6.26+2.0.5-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Atheros L2 Ethernet Adapter driver modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.26-1-686_2.6.26+2.0.5-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Atheros L2 Ethernet Adapter driver modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.26-1-amd64_2.6.26+2.0.5-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6.26 on AMD64
This package provides the Atheros L2 Ethernet Adapter driver modules for
the Linux kernel version 2.6.26 on all 64bit single- and multiprocessor
AMD and Intel machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.26-1-openvz-686_2.6.26+2.0.5-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Atheros L2 Ethernet Adapter driver modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.26-1-vserver-686-bigmem_2.6.26+2.0.5-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Atheros L2 Ethernet Adapter driver modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.26-1-vserver-686_2.6.26+2.0.5-5_i386.deb optional admin
WARNING: Already present in main distribution.
Atheros L2 Ethernet Adapter driver for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Atheros L2 Ethernet Adapter driver modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) aufs-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6 on x86
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on x86 and compatible machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6 on AMD64
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on all 64bit single- and multiprocessor AMD and
Intel machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6 on i686
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on i686 and compatible machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-486_2.6.26+0+20080719-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6.26 on x86
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on x86 and compatible machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-686-bigmem_2.6.26+0+20080719-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-686_2.6.26+0+20080719-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-amd64_2.6.26+0+20080719-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6.26 on AMD64
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on all 64bit single- and multiprocessor AMD
and Intel machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-openvz-686_2.6.26+0+20080719-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-vserver-686-bigmem_2.6.26+0+20080719-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-vserver-686_2.6.26+0+20080719-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-xen-686_2.6.26+0+20080719-5_i386.deb optional admin
WARNING: Already present in main distribution.
Stackable unification filesystem for Linux 2.6.26 on i686
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on i686 and compatible machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) btrfs-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6 on x86
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on x86 and compatible machines.
(new) btrfs-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
(new) btrfs-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
(new) btrfs-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6 on AMD64
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on all 64bit single- and multiprocessor AMD and Intel
machines.
(new) btrfs-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
(new) btrfs-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
(new) btrfs-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
(new) btrfs-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6 on i686
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on i686 and compatible machines.
(new) btrfs-modules-2.6.26-1-486_2.6.26+0.16-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6.26 on x86
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on x86 and compatible machines.
(new) btrfs-modules-2.6.26-1-686-bigmem_2.6.26+0.16-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
(new) btrfs-modules-2.6.26-1-686_2.6.26+0.16-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
(new) btrfs-modules-2.6.26-1-amd64_2.6.26+0.16-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6.26 on AMD64
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on all 64bit single- and multiprocessor AMD and
Intel machines.
(new) btrfs-modules-2.6.26-1-openvz-686_2.6.26+0.16-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
(new) btrfs-modules-2.6.26-1-vserver-686-bigmem_2.6.26+0.16-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
(new) btrfs-modules-2.6.26-1-vserver-686_2.6.26+0.16-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
(new) btrfs-modules-2.6.26-1-xen-686_2.6.26+0.16-5_i386.deb optional admin
WARNING: Already present in main distribution.
Snapshotting filesystem for Linux 2.6.26 on i686
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on i686 and compatible machines.
(new) drbd8-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6 on x86
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on x86 and compatible machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4 with
4-64G RAM machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6 on AMD64
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on all 64bit single- and multiprocessor AMD and Intel machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4 with
4-64G RAM machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6 on i686
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on i686 and compatible machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-486_2.6.26+8.0.14~rc1-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6.26 on x86
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on x86 and compatible machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-686-bigmem_2.6.26+8.0.14~rc1-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-686_2.6.26+8.0.14~rc1-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-amd64_2.6.26+8.0.14~rc1-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6.26 on AMD64
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on all 64bit single- and multiprocessor AMD and Intel
machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-openvz-686_2.6.26+8.0.14~rc1-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-vserver-686-bigmem_2.6.26+8.0.14~rc1-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-vserver-686_2.6.26+8.0.14~rc1-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-xen-686_2.6.26+8.0.14~rc1-5_i386.deb optional admin
WARNING: Already present in main distribution.
RAID 1 over TCP/IP for Linux 2.6.26 on i686
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on i686 and compatible machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) et131x-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
et131x Ethernet Adapter driver for Linux 2.6 on x86
This package depends on the et131x Ethernet Adapter driver modules for
latest Linux kernel 2.6 on x86 and compatible machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
et131x Ethernet Adapter driver for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the et131x Ethernet Adapter driver modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
et131x Ethernet Adapter driver for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the et131x Ethernet Adapter driver modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
et131x Ethernet Adapter driver for Linux 2.6 on AMD64
This package depends on the et131x Ethernet Adapter driver modules for
latest Linux kernel 2.6 on all 64bit single- and multiprocessor AMD and
Intel machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
et131x Ethernet Adapter driver for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the et131x Ethernet Adapter driver modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6.26-1-486_2.6.26+1.2.3-2-5_i386.deb optional admin
WARNING: Already present in main distribution.
et131x Ethernet Adapter driver for Linux 2.6.26 on x86
This package provides the et131x Ethernet Adapter driver modules for the
Linux kernel version 2.6.26 on x86 and compatible machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6.26-1-686-bigmem_2.6.26+1.2.3-2-5_i386.deb optional admin
WARNING: Already present in main distribution.
et131x Ethernet Adapter driver for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the et131x Ethernet Adapter driver modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6.26-1-686_2.6.26+1.2.3-2-5_i386.deb optional admin
WARNING: Already present in main distribution.
et131x Ethernet Adapter driver for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the et131x Ethernet Adapter driver modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6.26-1-amd64_2.6.26+1.2.3-2-5_i386.deb optional admin
WARNING: Already present in main distribution.
et131x Ethernet Adapter driver for Linux 2.6.26 on AMD64
This package provides the et131x Ethernet Adapter driver modules for the
Linux kernel version 2.6.26 on all 64bit single- and multiprocessor AMD
and Intel machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6.26-1-openvz-686_2.6.26+1.2.3-2-5_i386.deb optional admin
WARNING: Already present in main distribution.
et131x Ethernet Adapter driver for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the et131x Ethernet Adapter driver modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) gspca-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6 on x86
This package depends on the Driver for webcams and digicams based on
spca5xx chipset modules for latest Linux kernel 2.6 on x86 and compatible
machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Driver for webcams and digicams based on
spca5xx chipset modules for latest Linux kernel 2.6 on Pentium
Pro/Celeron/Pentium II/Pentium III/Pentium 4 with 4-64G RAM machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Driver for webcams and digicams based on
spca5xx chipset modules for latest Linux kernel 2.6 on Pentium
Pro/Celeron/Pentium II/Pentium III/Pentium 4 machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6 on AMD64
This package depends on the Driver for webcams and digicams based on
spca5xx chipset modules for latest Linux kernel 2.6 on all 64bit single-
and multiprocessor AMD and Intel machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Driver for webcams and digicams based on
spca5xx chipset modules for latest Linux kernel 2.6 on Pentium
Pro/Celeron/Pentium II/Pentium III/Pentium 4 machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Driver for webcams and digicams based on
spca5xx chipset modules for latest Linux kernel 2.6 on Pentium
Pro/Celeron/Pentium II/Pentium III/Pentium 4 with 4-64G RAM machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Driver for webcams and digicams based on
spca5xx chipset modules for latest Linux kernel 2.6 on Pentium
Pro/Celeron/Pentium II/Pentium III/Pentium 4 machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6.26-1-486_2.6.26+01.00.20-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6.26 on x86
This package provides the Driver for webcams and digicams based on spca5xx
chipset modules for the Linux kernel version 2.6.26 on x86 and compatible
machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6.26-1-686-bigmem_2.6.26+01.00.20-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Driver for webcams and digicams based on spca5xx
chipset modules for the Linux kernel version 2.6.26 on Pentium
Pro/Celeron/Pentium II/Pentium III/Pentium 4 with 4-64G RAM machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6.26-1-686_2.6.26+01.00.20-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Driver for webcams and digicams based on spca5xx
chipset modules for the Linux kernel version 2.6.26 on Pentium
Pro/Celeron/Pentium II/Pentium III/Pentium 4 machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6.26-1-amd64_2.6.26+01.00.20-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6.26 on AMD64
This package provides the Driver for webcams and digicams based on spca5xx
chipset modules for the Linux kernel version 2.6.26 on all 64bit single-
and multiprocessor AMD and Intel machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6.26-1-openvz-686_2.6.26+01.00.20-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Driver for webcams and digicams based on spca5xx
chipset modules for the Linux kernel version 2.6.26 on Pentium
Pro/Celeron/Pentium II/Pentium III/Pentium 4 machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6.26-1-vserver-686-bigmem_2.6.26+01.00.20-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Driver for webcams and digicams based on spca5xx
chipset modules for the Linux kernel version 2.6.26 on Pentium
Pro/Celeron/Pentium II/Pentium III/Pentium 4 with 4-64G RAM machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6.26-1-vserver-686_2.6.26+01.00.20-5_i386.deb optional admin
WARNING: Already present in main distribution.
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Driver for webcams and digicams based on spca5xx
chipset modules for the Linux kernel version 2.6.26 on Pentium
Pro/Celeron/Pentium II/Pentium III/Pentium 4 machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) iscsitarget-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6 on x86
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on x86 and compatible machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6 on AMD64
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on all 64bit single- and multiprocessor AMD and Intel
machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6 on i686
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on i686 and compatible machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-486_2.6.26+0.4.16+svn162-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6.26 on x86
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on x86 and compatible machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-686-bigmem_2.6.26+0.4.16+svn162-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-686_2.6.26+0.4.16+svn162-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-amd64_2.6.26+0.4.16+svn162-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6.26 on AMD64
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on all 64bit single- and multiprocessor AMD and
Intel machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-openvz-686_2.6.26+0.4.16+svn162-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-vserver-686-bigmem_2.6.26+0.4.16+svn162-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-vserver-686_2.6.26+0.4.16+svn162-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-xen-686_2.6.26+0.4.16+svn162-5_i386.deb optional admin
WARNING: Already present in main distribution.
iSCSI Enterprise Target for Linux 2.6.26 on i686
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on i686 and compatible machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) loop-aes-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6 on x86
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on x86 and compatible machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4 with
4-64G RAM machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6 on AMD64
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on all 64bit single- and multiprocessor AMD and Intel machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4 with
4-64G RAM machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6 on i686
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on i686 and compatible machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-486_2.6.26+3.2c-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6.26 on x86
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on x86 and compatible machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-686-bigmem_2.6.26+3.2c-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-686_2.6.26+3.2c-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-amd64_2.6.26+3.2c-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6.26 on AMD64
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on all 64bit single- and multiprocessor AMD and Intel
machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-openvz-686_2.6.26+3.2c-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-vserver-686-bigmem_2.6.26+3.2c-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-vserver-686_2.6.26+3.2c-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-xen-686_2.6.26+3.2c-5_i386.deb optional admin
WARNING: Already present in main distribution.
loop-AES encryption for Linux 2.6.26 on i686
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on i686 and compatible machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) lzma-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6 on x86
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on x86 and compatible machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6 on AMD64
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on all 64bit single- and multiprocessor AMD
and Intel machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6 on i686
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on i686 and compatible machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-486_2.6.26+4.43-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on x86
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on x86 and compatible machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-686-bigmem_2.6.26+4.43-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-686_2.6.26+4.43-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-amd64_2.6.26+4.43-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on AMD64
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on all 64bit single- and multiprocessor
AMD and Intel machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-openvz-686_2.6.26+4.43-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-vserver-686-bigmem_2.6.26+4.43-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-vserver-686_2.6.26+4.43-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-xen-686_2.6.26+4.43-5_i386.deb optional admin
WARNING: Already present in main distribution.
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on i686
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on i686 and compatible machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) nilfs2-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6 on x86
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on x86 and compatible machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6 on AMD64
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on all 64bit single- and multiprocessor AMD
and Intel machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6 on i686
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on i686 and compatible machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-486_2.6.26+2.0.4-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6.26 on x86
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on x86 and compatible machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-686-bigmem_2.6.26+2.0.4-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium
II/Pentium III/Pentium 4 with 4-64G RAM machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-686_2.6.26+2.0.4-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium
II/Pentium III/Pentium 4 machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-amd64_2.6.26+2.0.4-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6.26 on AMD64
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on all 64bit single- and
multiprocessor AMD and Intel machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-openvz-686_2.6.26+2.0.4-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium
II/Pentium III/Pentium 4 machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-vserver-686-bigmem_2.6.26+2.0.4-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium
II/Pentium III/Pentium 4 with 4-64G RAM machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-vserver-686_2.6.26+2.0.4-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium
II/Pentium III/Pentium 4 machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-xen-686_2.6.26+2.0.4-5_i386.deb optional admin
WARNING: Already present in main distribution.
Log-structured snapshotting filesystem for Linux 2.6.26 on i686
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on i686 and compatible machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) redhat-cluster-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6 on x86
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on x86 and compatible machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6 on AMD64
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on all 64bit single- and multiprocessor AMD and
Intel machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6 on i686
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on i686 and compatible machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-486_2.6.26+2.20080801-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6.26 on x86
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on x86 and compatible machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-686-bigmem_2.6.26+2.20080801-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-686_2.6.26+2.20080801-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-amd64_2.6.26+2.20080801-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6.26 on AMD64
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on all 64bit single- and multiprocessor AMD
and Intel machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-openvz-686_2.6.26+2.20080801-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-vserver-686-bigmem_2.6.26+2.20080801-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-vserver-686_2.6.26+2.20080801-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-xen-686_2.6.26+2.20080801-5_i386.deb optional admin
WARNING: Already present in main distribution.
Redhat Cluster infrastructure for Linux 2.6.26 on i686
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on i686 and compatible machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) speakup-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6 on x86
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on x86 and compatible machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4 with
4-64G RAM machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6 on AMD64
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on all 64bit single- and multiprocessor AMD and Intel machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4 with
4-64G RAM machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6 on i686
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on i686 and compatible machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-486_2.6.26+3.0.3+git20080724.dfsg.1-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6.26 on x86
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on x86 and compatible machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-686-bigmem_2.6.26+3.0.3+git20080724.dfsg.1-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-686_2.6.26+3.0.3+git20080724.dfsg.1-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-amd64_2.6.26+3.0.3+git20080724.dfsg.1-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6.26 on AMD64
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on all 64bit single- and multiprocessor AMD and
Intel machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-openvz-686_2.6.26+3.0.3+git20080724.dfsg.1-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-vserver-686-bigmem_2.6.26+3.0.3+git20080724.dfsg.1-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-vserver-686_2.6.26+3.0.3+git20080724.dfsg.1-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-xen-686_2.6.26+3.0.3+git20080724.dfsg.1-5_i386.deb optional admin
WARNING: Already present in main distribution.
Screen review module for Linux 2.6.26 on i686
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on i686 and compatible machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) squashfs-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6 on x86
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on x86 and compatible machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6 on AMD64
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on all 64bit single- and multiprocessor AMD and Intel
machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6 on i686
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on i686 and compatible machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-486_2.6.26+3.3-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6.26 on x86
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on x86 and compatible machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-686-bigmem_2.6.26+3.3-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-686_2.6.26+3.3-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-amd64_2.6.26+3.3-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6.26 on AMD64
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on all 64bit single- and multiprocessor AMD and
Intel machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-openvz-686_2.6.26+3.3-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-vserver-686-bigmem_2.6.26+3.3-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-vserver-686_2.6.26+3.3-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-xen-686_2.6.26+3.3-5_i386.deb optional admin
WARNING: Already present in main distribution.
Compression filesystem for Linux 2.6.26 on i686
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on i686 and compatible machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) tp-smapi-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6 on x86
This package depends on the ThinkPad hardware/firmware access modules for
latest Linux kernel 2.6 on x86 and compatible machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the ThinkPad hardware/firmware access modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the ThinkPad hardware/firmware access modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6 on AMD64
This package depends on the ThinkPad hardware/firmware access modules for
latest Linux kernel 2.6 on all 64bit single- and multiprocessor AMD and
Intel machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the ThinkPad hardware/firmware access modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the ThinkPad hardware/firmware access modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the ThinkPad hardware/firmware access modules for
latest Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6-xen-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6 on i686
This package depends on the ThinkPad hardware/firmware access modules for
latest Linux kernel 2.6 on i686 and compatible machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6.26-1-486_2.6.26+0.37-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6.26 on x86
This package provides the ThinkPad hardware/firmware access modules for
the Linux kernel version 2.6.26 on x86 and compatible machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6.26-1-686-bigmem_2.6.26+0.37-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the ThinkPad hardware/firmware access modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6.26-1-686_2.6.26+0.37-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the ThinkPad hardware/firmware access modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6.26-1-amd64_2.6.26+0.37-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6.26 on AMD64
This package provides the ThinkPad hardware/firmware access modules for
the Linux kernel version 2.6.26 on all 64bit single- and multiprocessor
AMD and Intel machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6.26-1-openvz-686_2.6.26+0.37-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the ThinkPad hardware/firmware access modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6.26-1-vserver-686-bigmem_2.6.26+0.37-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the ThinkPad hardware/firmware access modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6.26-1-vserver-686_2.6.26+0.37-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the ThinkPad hardware/firmware access modules for
the Linux kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) tp-smapi-modules-2.6.26-1-xen-686_2.6.26+0.37-5_i386.deb optional admin
WARNING: Already present in main distribution.
ThinkPad hardware/firmware access for Linux 2.6.26 on i686
This package provides the ThinkPad hardware/firmware access modules for
the Linux kernel version 2.6.26 on i686 and compatible machines.
.
The tp_smapi kernel module exposes some features of the ThinkPad
hardware/firmware via a sysfs interface. Currently, the main implemented
functionality is control of battery charging and extended battery status.
The underlying hardware interfaces are SMAPI and direct access to the
embedded controller.
(new) virtualbox-ose-guest-modules-2.6-486_2.6.26-5_i386.deb optional admin
PC virtualization solution for Linux 2.6 on x86
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on x86 and compatible machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
PC virtualization solution for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6-686_2.6.26-5_i386.deb optional admin
PC virtualization solution for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
PC virtualization solution for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
PC virtualization solution for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
PC virtualization solution for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6.26-1-486_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
PC virtualization solution for Linux 2.6.26 on x86
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on x86 and compatible machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6.26-1-686-bigmem_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
PC virtualization solution for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6.26-1-686_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
PC virtualization solution for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6.26-1-openvz-686_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
PC virtualization solution for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6.26-1-vserver-686-bigmem_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
PC virtualization solution for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-guest-modules-2.6.26-1-vserver-686_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
PC virtualization solution for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose-guest-utils on the
guest system.
(new) virtualbox-ose-modules-2.6-486_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6 on x86
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on x86 and compatible machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6-amd64_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6 on AMD64
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on all 64bit single- and multiprocessor AMD and Intel
machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6-openvz-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6-vserver-686-bigmem_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
with 4-64G RAM machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6-vserver-686_2.6.26-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6 on PPro/Celeron/PII/PIII/P4
This package depends on the PC virtualization solution modules for latest
Linux kernel 2.6 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium 4
machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6.26-1-486_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6.26 on x86
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on x86 and compatible machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6.26-1-686-bigmem_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6.26-1-686_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6.26-1-amd64_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6.26 on AMD64
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on all 64bit single- and multiprocessor AMD and
Intel machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6.26-1-openvz-686_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6.26-1-vserver-686-bigmem_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 with 4-64G RAM machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
(new) virtualbox-ose-modules-2.6.26-1-vserver-686_2.6.26+1.6.6-dfsg-5_i386.deb optional admin
WARNING: Already present in main distribution.
PC virtualization solution for Linux 2.6.26 on PPro/Celeron/PII/PIII/P4
This package provides the PC virtualization solution modules for the Linux
kernel version 2.6.26 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
.
VirtualBox is a free PC virtualization solution allowing you to run a wide
range of PC operating systems on your system.
.
These modules are needed in order to use virtualbox-ose on the host
system.
Changes: linux-modules-extra-2.6 (2.6.26-5) unstable; urgency=low
.
* Disable virtualbox-ose on xen.
* Reenable virtualbox-ose-guest.
* Build against verion 2.6.26-9 (new Xen images).
Override entries for your package:
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: