Bug#497623: linux-image-2.6.26: randomly crashes without traces
Package: linux-image-2.6.26-1-686
Version: 2.6.26-3
Severity: grave
File: linux-image-2.6.26
Justification: renders package unusable
Dear maintainers,
I got really serious situations several times since using 2.6.26:
somehow my system just crashes. It happens while browsing (no flash in
use at that moment) or just editing OOo documents. The screen turns sort
of black and, well, that's it... no shortcuts working, even magic keys
don't do anything. A cold reset is needed. :(
Unfortunately logs don't seem to get the crash, either. Syslog ended
last time with --MARK-- and so did /var/log/messages.
Below is the standard information collected by reportbug. If you want me
to do anything to help debugging whatever happens, just tell me.
Cheers,
Hauke
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-3) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Aug 20 12:56:41 UTC 2008
** Command line:
root=UUID=ab37a766-ecfe-4ffd-97ea-9323129412cb ro vga=791
** Tainted: P (1)
** Kernel log:
[ 5.421200] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 5.423769] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 5.426361] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 5.484067] usb usb5: configuration #1 chosen from 1 choice
[ 5.486638] hub 5-0:1.0: USB hub found
[ 5.489207] hub 5-0:1.0: 2 ports detected
[ 5.592072] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.594631] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.597189] usb usb5: Product: OHCI Host Controller
[ 5.599730] usb usb5: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
[ 5.602302] usb usb5: SerialNumber: 0000:00:13.4
[ 5.606839] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
[ 5.608825] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 5.611403] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 5.614524] ehci_hcd 0000:00:13.5: debug port 1
[ 5.617074] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 5.630222] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.632007] usb usb6: configuration #1 chosen from 1 choice
[ 5.634595] hub 6-0:1.0: USB hub found
[ 5.637132] hub 6-0:1.0: 10 ports detected
[ 5.740074] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.742637] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.745206] usb usb6: Product: EHCI Host Controller
[ 5.747736] usb usb6: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 5.750267] usb usb6: SerialNumber: 0000:00:13.5
[ 5.754853] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
[ 5.756753] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 5.759320] SB600_PATA: not 100% native mode: will probe irqs later
[ 5.762474] ide0: BM-DMA at 0xe400-0xe407
[ 5.765082] Probing IDE interface ide0...
[ 6.500347] hda: ATAPI DVD D DH16D2P, ATAPI CD/DVD-ROM drive
[ 7.284347] hdb: HL-DT-STDVD-RAM GSA-H58N, ATAPI CD/DVD-ROM drive
[ 7.340033] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 7.340312] hda: UDMA/33 mode selected
[ 7.343329] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 7.343540] hdb: UDMA/66 mode selected
[ 7.346480] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 7.423173] Driver 'sd' needs updating - please use bus_type methods
[ 7.426082] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 7.430004] sd 0:0:0:0: [sda] Write Protect is off
[ 7.432791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.432821] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.446643] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 7.448006] sd 0:0:0:0: [sda] Write Protect is off
[ 7.450825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.450857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.453800] sda: sda1 sda2 <<6>hda: ATAPI 48X DVD-ROM drive, 198kB Cache
[ 7.475630] Uniform CD-ROM driver Revision: 3.20
[ 7.483915] sda5<6>hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 7.488966] sda6 >
[ 7.492184] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.800588] PM: Starting manual resume from disk
[ 7.829655] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 7.834110] SGI XFS Quota Management subsystem
[ 7.860623] XFS mounting filesystem sda1
[ 7.924008] Ending clean XFS mount for filesystem: sda1
[ 9.109622] udevd version 125 started
[ 10.248007] input: PC Speaker as /class/input/input1
[ 10.834746] parport_pc 00:09: reported by Plug and Play ACPI
[ 10.838132] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 10.925142] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.934347] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.078391] Linux agpgart interface v0.103
[ 11.121069] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 11.142775] Error: Driver 'pcspkr' is already registered, aborting...
[ 11.221149] input: Power Button (FF) as /class/input/input2
[ 11.252299] ACPI: Power Button (FF) [PWRF]
[ 11.255653] input: Power Button (CM) as /class/input/input3
[ 11.288857] ACPI: Power Button (CM) [PWRB]
[ 11.714248] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 11.806785] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 12.959502] Adding 2634620k swap on /dev/sda5. Priority:-1 extents:1 across:2634620k
[ 13.276005] loop: module loaded
[ 13.328010] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[ 13.400010] ndiswrapper: driver wg311v3 (NETGEAR,02/22/2005,3.1.1.7) loaded
[ 13.409098] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 13.413719] ndiswrapper: using IRQ 21
[ 13.676092] wlan0: ethernet device 00:1e:2a:3e:6b:16 using NDIS driver: wg311v3, version: 0x3000036, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:1FAA.5.conf
[ 13.683176] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 13.687209] usbcore: registered new interface driver ndiswrapper
[ 13.732011] powernow-k8: Found 1 AMD Athlon(tm) Processor LE-1620 processors (1 cpu cores) (version 2.20.00)
[ 13.769282] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0xc
[ 13.773251] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xe
[ 13.776860] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x10
[ 13.780377] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x10
[ 13.783812] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 13.916951] device-mapper: uevent: version 1.0.3
[ 13.921262] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 14.136008] XFS mounting filesystem sda6
[ 14.240038] Ending clean XFS mount for filesystem: sda6
[ 15.736011] r8169: eth0: link up
[ 15.750174] r8169: eth0: link up
[ 19.781497] lp0: using parport0 (interrupt-driven).
[ 19.807213] ppdev: user-space parallel port driver
[ 21.000018] Clocksource tsc unstable (delta = -135294650 ns)
[ 21.888780] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 22.070170] NET: Registered protocol family 10
[ 22.077506] lo: Disabled Privacy Extensions
[ 25.326420] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 43.544013] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 235172 18
ppdev 6468 0
lp 8164 0
video 16400 0
output 2912 1 video
ac 3264 0
battery 6272 0
cpufreq_stats 3776 0
cpufreq_conservative 5960 0
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
cpufreq_userspace 3172 0
cpufreq_ondemand 6476 1
cpufreq_powersave 1856 0
powernow_k8 12036 0
freq_table 4224 3 cpufreq_stats,cpufreq_ondemand,powernow_k8
ndiswrapper 152412 0
loop 12748 0
snd_hda_intel 324248 0
snd_seq_dummy 2660 0
snd_seq_oss 24992 0
button 6064 0
snd_seq_midi 5728 0
snd_rawmidi 18560 1 snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
i2c_piix4 7216 0
psmouse 32336 0
ati_agp 6220 0
agpgart 28776 1 ati_agp
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
evdev 8000 3
k8temp 4064 0
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
i2c_core 19828 1 i2c_piix4
shpchp 25528 0
pci_hotplug 23460 1 shpchp
serio_raw 4740 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
snd_pcm 62628 2 snd_hda_intel,snd_pcm_oss
snd_timer 17800 2 snd_seq,snd_pcm
snd 45604 9 snd_hda_intel,snd_seq_oss,snd_rawmidi,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
pcspkr 2432 0
xfs 458040 2
ide_cd_mod 27684 0
cdrom 30176 1 ide_cd_mod
sd_mod 22200 4
ata_generic 4676 0
ide_pci_generic 3908 0 [permanent]
atiixp 3396 0 [permanent]
ide_core 92628 3 ide_cd_mod,ide_pci_generic,atiixp
ehci_hcd 28428 0
ahci 23176 3
ohci_hcd 18500 0
usbcore 118160 4 ndiswrapper,ehci_hcd,ohci_hcd
libata 140416 2 ata_generic,ahci
scsi_mod 129356 2 sd_mod,libata
dock 8272 1 libata
r8169 23716 0
thermal 15228 0
processor 32576 2 powernow_k8,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Kernel modules: ati-agp
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fda00000-fdbfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at fc00 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f400 [size=8]
Region 3: I/O ports at f000 [size=4]
Region 4: I/O ports at ec00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop+ ParErr+ Stepping+ SERR+ FastB2B+ DisINTx+
Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+ INTx+
Latency: 0
Region 0: I/O ports at 0b00 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at e400 [size=16]
Kernel driver in use: ATIIXP_IDE
Kernel modules: atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690 [Radeon X1200 Series] [1002:791e]
Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M]
Region 2: Memory at fdbf0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at cc00 [size=256]
Region 5: Memory at fda00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:81aa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 222
Region 0: I/O ports at dc00 [size=256]
Region 2: Memory at fdfff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:06.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless [11ab:1faa] (rev 03)
Subsystem: Netgear Device [1385:6b00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fdef0000 (32-bit, non-prefetchable) [size=64K]
Region 1: Memory at fdee0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ndiswrapper
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
Reply to: