Bug#480034: linux-image-2.6.25-1-amd64: No sound after suspend-to-ram an wake-up (snd_hda_intel)
Hello Maximilian, thank you for answering.
> how do you suspend?
I just close the lid of the laptop.
Just to complete information:
jack@vasquez:~$ lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 03)
> did you try:
> echo mem > /sys/power/state
I did and the machine went properly in sleep. When I woke it up, this is all
I could find in /var/log/messages:
May 9 13:47:38 vasquez kernel: [ 186.601919] PM: Syncing filesystems ...
done.
May 9 13:47:54 vasquez kernel: [ 188.092004] Freezing user space processes
... (elapsed 0.00 seconds) done.
May 9 13:47:54 vasquez kernel: [ 188.092813] Freezing remaining freezable
tasks ... (elapsed 0.00 seconds) done.
May 9 13:47:54 vasquez kernel: [ 188.092974] Suspending console(s)
May 9 13:47:54 vasquez kernel: [ 188.093498] ACPI: PCI interrupt for
device 0000:00:02.0 disabled
May 9 13:47:54 vasquez kernel: [ 192.182003] sd 0:0:0:0: [sda]
Synchronizing SCSI cache
May 9 13:47:54 vasquez kernel: [ 192.182122] sd 0:0:0:0: [sda] Stopping
disk
May 9 13:47:54 vasquez kernel: [ 189.435728] ricoh-mmc: Suspending.
May 9 13:47:54 vasquez kernel: [ 189.435755] ricoh-mmc: Controller is now
re-enabled.
May 9 13:47:54 vasquez kernel: [ 189.435855] ACPI: PCI interrupt for
device 0000:06:01.1 disabled
May 9 13:47:54 vasquez kernel: [ 189.474817] sky2 eth1: disabling
interface
May 9 13:47:54 vasquez kernel: [ 189.506943] ACPI: PCI interrupt for
device 0000:02:00.0 disabled
May 9 13:47:54 vasquez kernel: [ 189.566994] ACPI: PCI interrupt for
device 0000:03:00.0 disabled
May 9 13:47:54 vasquez kernel: [ 190.104859] ACPI: PCI interrupt for
device 0000:00:1d.7 disabled
May 9 13:47:54 vasquez kernel: [ 190.281801] ACPI: PCI interrupt for
device 0000:00:1d.2 disabled
May 9 13:47:54 vasquez kernel: [ 190.281854] ACPI: PCI interrupt for
device 0000:00:1d.1 disabled
May 9 13:47:54 vasquez kernel: [ 190.281907] ACPI: PCI interrupt for
device 0000:00:1d.0 disabled
May 9 13:47:54 vasquez kernel: [ 190.491171] ACPI: PCI interrupt for
device 0000:00:1b.0 disabled
May 9 13:47:54 vasquez kernel: [ 190.667848] ACPI: PCI interrupt for
device 0000:00:1a.7 disabled
May 9 13:47:54 vasquez kernel: [ 190.758960] ACPI: PCI interrupt for
device 0000:00:1a.1 disabled
May 9 13:47:54 vasquez kernel: [ 190.758992] ACPI: PCI interrupt for
device 0000:00:1a.0 disabled
May 9 13:47:54 vasquez kernel: [ 190.762897] ACPI: Preparing to enter
system sleep state S3
May 9 13:47:54 vasquez kernel: [ 190.765106] Disabling non-boot CPUs ...
May 9 13:47:54 vasquez kernel: [ 190.878894] CPU 1 is now offline
May 9 13:47:54 vasquez kernel: [ 190.878900] SMP alternatives: switching
to UP code
May 9 13:47:54 vasquez kernel: [ 190.882813] CPU1 is down
May 9 13:47:54 vasquez kernel: [ 190.882883] Enabling non-boot CPUs ...
May 9 13:47:54 vasquez kernel: [ 190.899022] SMP alternatives: switching
to SMP code
May 9 13:47:54 vasquez kernel: [ 190.900485] Booting processor 1/2 APIC
0x1
May 9 13:47:54 vasquez kernel: [ 194.664936] Initializing CPU#1
May 9 13:47:54 vasquez kernel: [ 194.664936] Calibrating delay using timer
specific routine.. 4389.13 BogoMIPS (lpj=8778263)
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: L1 I cache: 32K, L1 D
cache: 32K
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: L2 cache: 4096K
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU 1/1 -> Node 0
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: Physical Processor ID: 0
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: Processor Core ID: 1
May 9 13:47:54 vasquez kernel: [ 194.664936] Intel(R) Core(TM)2 Duo CPU
T7500 @ 2.20GHz stepping 0a
May 9 13:47:54 vasquez kernel: [ 194.664936] CPU1 is up
May 9 13:47:54 vasquez kernel: [ 191.057619] ACPI: PCI Interrupt
0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
May 9 13:47:54 vasquez kernel: [ 191.057675] usb usb3: root hub lost power
or was reset
May 9 13:47:54 vasquez kernel: [ 191.057706] ACPI: PCI Interrupt
0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
May 9 13:47:54 vasquez kernel: [ 191.057758] usb usb4: root hub lost power
or was reset
May 9 13:47:54 vasquez kernel: [ 191.070907] ACPI: PCI Interrupt
0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
May 9 13:47:54 vasquez kernel: [ 191.086954] ACPI: PCI Interrupt
0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
May 9 13:47:54 vasquez kernel: [ 191.087263] ACPI: PCI Interrupt
0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
May 9 13:47:54 vasquez kernel: [ 191.087314] usb usb5: root hub lost power
or was reset
May 9 13:47:54 vasquez kernel: [ 191.087332] ACPI: PCI Interrupt
0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
May 9 13:47:54 vasquez kernel: [ 191.087383] usb usb6: root hub lost power
or was reset
May 9 13:47:54 vasquez kernel: [ 191.087401] ACPI: PCI Interrupt
0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
May 9 13:47:54 vasquez kernel: [ 191.087452] usb usb7: root hub lost power
or was reset
May 9 13:47:54 vasquez kernel: [ 191.102905] ACPI: PCI Interrupt
0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
May 9 13:47:54 vasquez kernel: [ 191.103077] ACPI: PCI Interrupt
0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
May 9 13:47:54 vasquez kernel: [ 192.139041] ACPI: PCI Interrupt
0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
May 9 13:47:54 vasquez kernel: [ 192.163084] ACPI: PCI Interrupt
0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
May 9 13:47:54 vasquez kernel: [ 192.431018] ata2: SATA link down (SStatus
0 SControl 300)
May 9 13:47:54 vasquez kernel: [ 192.431042] ata3: SATA link down (SStatus
0 SControl 300)
May 9 13:47:54 vasquez kernel: [ 193.183266] sky2 eth1: enabling interface
May 9 13:47:54 vasquez kernel: [ 193.295113] ACPI: PCI Interrupt
0000:06:01.1[B] -> GSI 17 (level, low) -> IRQ 17
May 9 13:47:54 vasquez kernel: [ 193.295138] ricoh-mmc: Resuming.
May 9 13:47:54 vasquez kernel: [ 193.295153] ricoh-mmc: Controller is now
disabled.
May 9 13:47:54 vasquez kernel: [ 193.487075] ata4: SATA link down (SStatus
0 SControl 300)
May 9 13:47:54 vasquez kernel: [ 193.883091] ata1: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
May 9 13:47:54 vasquez kernel: [ 193.896966] ata1.00: configured for
UDMA/100
May 9 13:47:54 vasquez kernel: [ 193.911174] sd 0:0:0:0: [sda] 312581808
512-byte hardware sectors (160042 MB)
May 9 13:47:54 vasquez kernel: [ 193.911213] sd 0:0:0:0: [sda] Write
Protect is off
May 9 13:47:54 vasquez kernel: [ 193.911282] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 9 13:47:54 vasquez kernel: [ 193.943126] sd 0:0:0:0: [sda] Starting
disk
May 9 13:47:54 vasquez kernel: [ 194.656742] hda: UDMA/33 mode selected
May 9 13:47:54 vasquez kernel: [ 194.672205] ACPI: PCI Interrupt
0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
May 9 13:47:54 vasquez kernel: [ 194.676906] sky2 eth1: Link is up at 100
Mbps, full duplex, flow control rx
May 9 13:47:54 vasquez kernel: [ 194.680135] Restarting tasks ... <6>usb
2-6: USB disconnect, address 3
May 9 13:47:54 vasquez kernel: [ 194.873866] done.
May 9 13:47:54 vasquez kernel: [ 194.964158] usb 2-6: new high speed USB
device using ehci_hcd and address 4
May 9 13:47:54 vasquez kernel: [ 195.115518] usb 2-6: configuration #1
chosen from 1 choice
May 9 13:47:54 vasquez kernel: [ 195.116834] usb 2-6: New USB device
found, idVendor=05e3, idProduct=0503
May 9 13:47:54 vasquez kernel: [ 195.116842] usb 2-6: New USB device
strings: Mfr=0, Product=1, SerialNumber=0
May 9 13:47:54 vasquez kernel: [ 195.116846] usb 2-6: Product: USB 2.0 PC
Camera
May 9 13:47:54 vasquez kernel: [ 195.116869] usb 3-1: USB disconnect,
address 2
May 9 13:47:54 vasquez kernel: [ 195.243471] usb 4-2: USB disconnect,
address 2
May 9 13:47:55 vasquez kernel: [ 195.519460] usb 4-2: new low speed USB
device using uhci_hcd and address 3
May 9 13:47:55 vasquez kernel: [ 195.760952] usb 4-2: configuration #1
chosen from 1 choice
May 9 13:47:55 vasquez kernel: [ 195.779452] input: Microsoft Microsoft
3-Button Mouse with IntelliEye(TM) as /class/input/input10
May 9 13:47:55 vasquez kernel: [ 195.838743] input,hidraw0: USB HID v1.10
Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1a.1-2
May 9 13:47:55 vasquez kernel: [ 195.838856] usb 4-2: New USB device
found, idVendor=045e, idProduct=0040
May 9 13:47:55 vasquez kernel: [ 195.838860] usb 4-2: New USB device
strings: Mfr=1, Product=3, SerialNumber=0
May 9 13:47:55 vasquez kernel: [ 195.838864] usb 4-2: Product: Microsoft
3-Button Mouse with IntelliEye(TM)
May 9 13:47:55 vasquez kernel: [ 195.838868] usb 4-2: Manufacturer:
Microsoft
May 9 13:47:55 vasquez kernel: [ 195.838914] usb 7-1: USB disconnect,
address 2
May 9 13:47:55 vasquez kernel: [ 196.326301] usb 7-1: new full speed USB
device using uhci_hcd and address 3
May 9 13:47:56 vasquez kernel: [ 196.569375] usb 7-1: configuration #1
chosen from 1 choice
May 9 13:47:56 vasquez kernel: [ 196.576060] usb 7-1: New USB device
found, idVendor=0b05, idProduct=1712
May 9 13:47:56 vasquez kernel: [ 196.576075] usb 7-1: New USB device
strings: Mfr=0, Product=0, SerialNumber=3
May 9 13:47:56 vasquez kernel: [ 196.576083] usb 7-1: SerialNumber:
0194E8-5B-0002
May 9 13:47:56 vasquez kernel: [ 197.057371] usb 3-1: new full speed USB
device using uhci_hcd and address 3
May 9 13:47:56 vasquez kernel: [ 197.235641] usb 3-1: configuration #1
chosen from 1 choice
May 9 13:47:56 vasquez kernel: [ 201.123983] usb 3-1: New USB device
found, idVendor=147e, idProduct=2016
May 9 13:47:56 vasquez kernel: [ 201.123993] usb 3-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=0
May 9 13:47:56 vasquez kernel: [ 201.123997] usb 3-1: Product: Fingerprint
Sensor
May 9 13:47:56 vasquez kernel: [ 201.124000] usb 3-1: Manufacturer:
TouchStrip
> if that doesn't work please report upstream in bugzilla.kernel.org
> and let us know the bug nr.
I will look for similar bugs there and if I can't find anything I'll report
back here. Thanks!
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Sponsor:
VINCI UNA CITROEN C1!
Scopri il nuovo concorso Best Western, gioca e vinci buoni sconto per i tuoi
soggiorni in hotel ? in palio anche una Citroen C1!
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=7800&d=20080509
Reply to: