Bug#469287: linux-image-2.6.22-3-amd64: WD360ADFD-00 harddisk should probably put in libata blacklist due to "spurious completions during NCQ" errors
Package: linux-image-2.6.22-3-amd64
Version: 2.6.22-6
Severity: normal
Loads of "spurious completions during NCQ" errors. See the logging
below:
-- Package-specific info:
** Version:
Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) (maks@debian.org) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007
** Not tainted
** Kernel log:
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
setiathome_enha[10251]: segfault at 0000000040000098 rip 00002af030cbdc9e rsp 00000000400000a0 error 6
setiathome_enha[18266]: segfault at 0000000040000098 rip 00002aabae605c9e rsp 00000000400000a0 error 6
setiathome_enha[2253]: segfault at 0000000040000098 rip 00002b11c5dc6c9e rsp 00000000400000a0 error 6
ata1.00: exception Emask 0x2 SAct 0x800f SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x800f FIS=004040a1:00004000)
ata1.00: cmd 61/10:00:f5:82:b1/00:00:00:00:00/40 tag 0 cdb 0x0 data 8192 out
res 40/00:18:15:04:af/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/10:08:65:f5:17/00:00:04:00:00/40 tag 1 cdb 0x0 data 8192 out
res 40/00:18:15:04:af/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:10:15:56:36/00:00:00:00:00/40 tag 2 cdb 0x0 data 4096 out
res 40/00:18:15:04:af/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/10:18:15:04:af/00:00:00:00:00/40 tag 3 cdb 0x0 data 8192 out
res 40/00:18:15:04:af/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:78:ed:82:b1/00:00:00:00:00/40 tag 15 cdb 0x0 data 4096 out
res 40/00:18:15:04:af/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: exception Emask 0x2 SAct 0x7 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x7 FIS=004040a1:00000080)
ata1.00: cmd 61/00:00:ad:dd:1f/04:00:01:00:00/40 tag 0 cdb 0x0 data 524288 out
res 40/00:38:95:30:43/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/00:08:ad:e1:1f/04:00:01:00:00/40 tag 1 cdb 0x0 data 524288 out
res 40/00:38:95:30:43/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/00:10:ad:e5:1f/04:00:01:00:00/40 tag 2 cdb 0x0 data 524288 out
res 40/00:38:95:30:43/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
mboxstats[12391]: segfault at 00007fff8f3f3d90 rip 0000000000403842 rsp 00007fff8f3e8e30 error 6
mboxstats[12393]: segfault at 00007fff9172c0d0 rip 0000000000403842 rsp 00007fff91721170 error 6
mboxstats[14463]: segfault at 00007fffdfd74d00 rip 0000000000403842 rsp 00007fffdfd69d90 error 6
einstein_S5R3_4[11113]: segfault at 00000000f7f9bcbc rip 00000000f7e4f677 rsp 00000000f7f9bcc0 error 6
setiathome_enha[17053]: segfault at 0000000040000098 rip 00002b5ed3c6cc9e rsp 00000000400000a0 error 6
setiathome_enha[16719]: segfault at 0000000040000098 rip 00002ab8098e0c9e rsp 00000000400000a0 error 6
setiathome_enha[26400]: segfault at 0000000040000098 rip 00002ae98e73ac9e rsp 00000000400000a0 error 6
ata1.00: exception Emask 0x2 SAct 0x8 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x8 FIS=004040a1:00000004)
ata1.00: cmd 61/10:18:8d:4f:33/00:00:04:00:00/40 tag 3 cdb 0x0 data 8192 out
res 40/00:18:8d:4f:33/00:00:04:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
setiathome_enha[14219]: segfault at 0000000040000098 rip 00002ac98c1eac9e rsp 00000000400000a0 error 6
einstein_S5R3_4[28775]: segfault at 00000000f7f74cbc rip 00000000f7e28677 rsp 00000000f7f74cc0 error 6
setiathome_enha[15005]: segfault at 0000000040000098 rip 00002b30d24bdc9e rsp 00000000400000a0 error 6
setiathome_enha[2496]: segfault at 0000000040000098 rip 00002b55cd74fc9e rsp 00000000400000a0 error 6
einstein_S5R3_4[17373]: segfault at 00000000f7fa5cbc rip 00000000f7e59677 rsp 00000000f7fa5cc0 error 6
einstein_S5R3_4[30618]: segfault at 00000000f7f4bcbc rip 00000000f7dff677 rsp 00000000f7f4bcc0 error 6
mboxstats[28058]: segfault at 00007fff47b4eae0 rip 0000000000403842 rsp 00007fff47b43b70 error 6
ata1.00: exception Emask 0x2 SAct 0xc002 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0xc002 FIS=004040a1:00002000)
ata1.00: cmd 61/08:08:cd:5e:b2/00:00:00:00:00/40 tag 1 cdb 0x0 data 4096 out
res 40/00:08:cd:5e:b2/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:70:05:b6:6c/00:00:00:00:00/40 tag 14 cdb 0x0 data 4096 out
res 40/00:08:cd:5e:b2/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:78:8d:b4:6d/00:00:00:00:00/40 tag 15 cdb 0x0 data 4096 out
res 40/00:08:cd:5e:b2/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
mboxstats[4232]: segfault at 00007fffdf80f7a0 rip 0000000000403842 rsp 00007fffdf804830 error 6
ata1.00: exception Emask 0x2 SAct 0x7000 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x7000 FIS=004040a1:00000800)
ata1.00: cmd 61/10:60:05:f7:19/00:00:04:00:00/40 tag 12 cdb 0x0 data 8192 out
res 40/00:70:85:74:1a/00:00:04:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/18:68:fd:33:1a/00:00:04:00:00/40 tag 13 cdb 0x0 data 12288 out
res 40/00:70:85:74:1a/00:00:04:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/18:70:85:74:1a/00:00:04:00:00/40 tag 14 cdb 0x0 data 12288 out
res 40/00:70:85:74:1a/00:00:04:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
i2c /dev entries driver
** Loaded modules:
Module Size Used by
i2c_dev 12424 0
ppp_deflate 10624 0
zlib_deflate 24088 1 ppp_deflate
bsd_comp 10240 0
ppp_async 16384 0
ppp_generic 33568 3 ppp_deflate,bsd_comp,ppp_async
nfs 255192 3
ipt_owner 6400 7
ip6t_REJECT 10112 75
ip6table_filter 7424 1
ip6_tables 18888 1 ip6table_filter
ipt_recent 14880 2
xt_limit 7552 4
xt_state 7040 4
ipt_REJECT 9216 83
ipt_MASQUERADE 8192 1
ipt_TOS 6656 20
xt_tcpudp 7808 265
iptable_mangle 7424 1
iptable_nat 12292 1
nf_conntrack_ipv4 24592 5 iptable_nat
nf_nat_irc 7168 0
nf_conntrack_irc 12448 1 nf_nat_irc
nf_nat_ftp 7936 0
nf_nat 25260 4 ipt_MASQUERADE,iptable_nat,nf_nat_irc,nf_nat_ftp
nf_conntrack_ftp 15328 1 nf_nat_ftp
nf_conntrack 75356 9 xt_state,ipt_MASQUERADE,iptable_nat,nf_conntrack_ipv4,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ftp
nfnetlink 10824 3 nf_conntrack_ipv4,nf_nat,nf_conntrack
iptable_filter 7552 1
ip_tables 24680 3 iptable_mangle,iptable_nat,iptable_filter
x_tables 24712 12 ipt_owner,ip6t_REJECT,ip6_tables,ipt_recent,xt_limit,xt_state,ipt_REJECT,ipt_MASQUERADE,ipt_TOS,xt_tcpudp,iptable_nat,ip_tables
ext2 70416 0
i915 31488 2
drm 100776 3 i915
nfsd 260392 13
exportfs 10368 1 nfsd
lockd 72752 3 nfs,nfsd
nfs_acl 8064 2 nfs,nfsd
sunrpc 186632 11 nfs,nfsd,lockd,nfs_acl
ppdev 13704 0
lp 17352 2
button 13472 0
ac 10376 0
battery 15496 0
microcode 16536 0
firmware_class 15360 1 microcode
ipv6 296840 78 ip6t_REJECT
quota_v2 13568 0
dm_snapshot 21704 0
dm_mirror 26240 0
dm_mod 64112 2 dm_snapshot,dm_mirror
coretemp 12544 0
firewire_sbp2 18180 0
firewire_core 49728 1 firewire_sbp2
crc_itu_t 6656 1 firewire_core
loop 23044 0
pl2303 25092 1
tsdev 13312 0
snd_hda_intel 311968 1
snd_usb_audio 93600 0
snd_seq_dummy 8452 0
hisax 401088 0
isdn 138976 1 hisax
snd_pcm_oss 48288 1
snd_mixer_oss 21376 1 snd_pcm_oss
slhc 10624 2 ppp_generic,isdn
snd_seq_oss 36736 0
snd_pcm 89992 3 snd_hda_intel,snd_usb_audio,snd_pcm_oss
snd_usb_lib 22016 1 snd_usb_audio
snd_seq_midi 13504 0
snd_seq_midi_event 12416 2 snd_seq_oss,snd_seq_midi
snd_seq 58752 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_rawmidi 30624 2 snd_usb_lib,snd_seq_midi
i2c_i801 13468 0
snd_timer 28424 2 snd_pcm,snd_seq
psmouse 45468 0
serio_raw 11780 0
snd_seq_device 12820 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
wcfxo 17056 0
pcspkr 7680 0
snd_hwdep 14728 1 snd_usb_audio
snd 65896 11 snd_hda_intel,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_pcm,snd_seq,snd_rawmidi,snd_timer,snd_seq_device,snd_hwdep
zaptel 199528 7 wcfxo
parport_pc 42664 1
parport 44428 3 ppdev,lp,parport_pc
i2c_core 31488 2 i2c_dev,i2c_i801
plusb 7424 0
usbnet 24584 1 plusb
mii 10240 1 usbnet
crc_ccitt 6656 3 ppp_async,hisax,zaptel
rtl8150 18304 0
soundcore 13088 2 snd
snd_page_alloc 15376 2 snd_hda_intel,snd_pcm
usbserial 40816 3 pl2303
pwc 89920 0
compat_ioctl32 13056 1 pwc
videodev 32512 1 pwc
v4l2_common 24320 2 compat_ioctl32,videodev
v4l1_compat 16388 1 videodev
iTCO_wdt 15824 0
intel_agp 32032 1
evdev 15232 3
ext3 137232 1
jbd 68080 1 ext3
mbcache 13832 2 ext2,ext3
usbhid 32704 0
hid 31360 1 usbhid
sg 41128 0
sr_mod 22564 0
cdrom 39848 1 sr_mod
pata_marvell 12416 0
ata_generic 13188 0
sd_mod 33280 3
ns83820 24968 0
ahci 28804 2
libata 132528 3 pata_marvell,ata_generic,ahci
scsi_mod 164536 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
generic 10372 0 [permanent]
ide_core 147728 1 generic
ehci_hcd 37900 0
uhci_hcd 29856 0
e1000 127552 0
thermal 19600 0
processor 39912 1 thermal
fan 9992 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G965 Integrated Graphics Controller [8086:29a2] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3410 [size=8]
Capabilities: <access denied>
00:03.0 Communication controller [0780]: Intel Corporation 82P965/G965 HECI Controller [8086:29a4] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0326100 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 1273
Region 0: Memory at e0300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e0324000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 30e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000
Kernel modules: e1000
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 30c0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 30a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e0325c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:2504]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e0320000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e0100000-e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e0325800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e0000000-e00fffff
Prefetchable memory behind bridge: 00000000e0400000-00000000e04fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller [8086:2812] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA AHCI Controller [8086:2821] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 1274
Region 0: I/O ports at 3408 [size=8]
Region 1: I/O ports at 341c [size=4]
Region 2: I/O ports at 3400 [size=8]
Region 3: I/O ports at 3418 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at e0325000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:514d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 0: Memory at e0326000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 2018 [size=8]
Region 1: I/O ports at 2024 [size=4]
Region 2: I/O ports at 2010 [size=8]
Region 3: I/O ports at 2020 [size=4]
Region 4: I/O ports at 2000 [size=16]
Region 5: Memory at e0100000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
Kernel modules: generic, ata_generic, pata_marvell
06:00.0 Serial controller [0700]: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) [1409:7168] (rev 01) (prog-if 02 [16550])
Subsystem: Timedia Technology Co Ltd Unknown device [1409:4037]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 1800 [size=32]
Kernel driver in use: serial
06:01.0 Ethernet controller [0200]: National Semiconductor Corporation DP83820 10/100/1000 Ethernet Controller [100b:0022]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2750ns min, 13000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 1400 [size=256]
Region 1: Memory at e0001000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at e0400000 [disabled] [size=64K]
Kernel driver in use: ns83820
Kernel modules: ns83820
06:02.0 Communication controller [0780]: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface [e159:0001]
Subsystem: Intel Corporation Digium X100P/X101P analogue PSTN FXO interface [8086:0003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: wcfxo
Kernel modules: hisax, wcopenpci, wcfxo
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.22-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.22-3-amd64 depends on:
ii e2fsprogs 1.40.6-1 ext2 file system utilities and lib
ii initramfs-tools [linux-initr 0.91e tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
linux-image-2.6.22-3-amd64 recommends no packages.
-- debconf information:
linux-image-2.6.22-3-amd64/postinst/old-system-map-link-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/preinst/failed-to-move-modules-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/prerm/removing-running-kernel-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/postinst/bootloader-error-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/postinst/old-initrd-link-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/postinst/bootloader-test-error-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/preinst/bootloader-initrd-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/preinst/lilo-initrd-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/preinst/abort-install-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/preinst/elilo-initrd-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/preinst/initrd-2.6.22-3-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-3-amd64/postinst/create-kimage-link-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/postinst/depmod-error-initrd-2.6.22-3-amd64: false
linux-image-2.6.22-3-amd64/prerm/would-invalidate-boot-loader-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/preinst/overwriting-modules-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/postinst/depmod-error-2.6.22-3-amd64: false
linux-image-2.6.22-3-amd64/preinst/abort-overwrite-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/preinst/already-running-this-2.6.22-3-amd64:
linux-image-2.6.22-3-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.22-3-amd64/postinst/old-dir-initrd-link-2.6.22-3-amd64: true
linux-image-2.6.22-3-amd64/postinst/kimage-is-a-directory:
Reply to: