--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.25-2-686: 2.6.25 (and possibly before) very slow to boot around devicemapper/s2disk initialisation stage
- From: Tim Connors <reportbug@rather.puzzling.org>
- Date: Thu, 05 Jun 2008 14:17:31 +1000
- Message-id: <20080605041731.20062.56835.reportbug@scuzzie.rather.puzzling.org>
Package: linux-image-2.6.25-2-686
Version: 2.6.25-4
Severity: normal
2.6.25 is very slow to boot on both my i686 (debian 2.6.25-2-686) and
amd64 (debian source 2.6.25-4) machines. I suspect this may have been
happening for 2.6.24 as well, but I will need to go back and check.
I don't think the following bug is related, but maybe, since it
mentions device-mapper...
http://lkml.org/lkml/2008/4/27/19
Notice the time missing between between 11 and 64 seconds. I haven't
rebooted my amd64 machine yet with the kernel compiled with timing
information, but I think it was happening at the same
device-mapper/suspend to disk stage.
Neither kernel is actually booting a suspended image. But booting
from suspended images has also been slow.
processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084011] Calibrating delay using timer specific routine.. 1304.54 BogoMIPS (lpj=2609087)
[ 0.084136] Security Framework initialized
[ 0.084153] SELinux: Disabled at boot.
[ 0.084164] Capability LSM initialized
[ 0.084217] Mount-cache hash table entries: 512
[ 0.084602] Initializing cgroup subsys ns
[ 0.084615] Initializing cgroup subsys cpuacct
[ 0.084671] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.084680] CPU: L2 cache: 256K
[ 0.084691] Intel machine check architecture supported.
[ 0.084702] Intel machine check reporting enabled on CPU#0.
[ 0.084719] Compat vDSO mapped to ffffe000.
[ 0.084744] Checking 'hlt' instruction... OK.
[ 0.100487] SMP alternatives: switching to UP code
[ 0.104055] Freeing SMP alternatives: 16k freed
[ 0.104067] ACPI: Core revision 20070126
[ 0.114254] ACPI: setting ELCR to 0200 (from 0820)
[ 0.116147] CPU0: Intel Pentium III (Coppermine) stepping 06
[ 0.116163] SMP motherboard not detected.
[ 0.116171] Local APIC not detected. Using dummy APIC emulation.
[ 0.116337] Brought up 1 CPUs
[ 0.116403] CPU0 attaching sched-domain:
[ 0.116412] domain 0: span 01
[ 0.116419] groups: 01
[ 0.117110] net_namespace: 548 bytes
[ 0.117145] Booting paravirtualized kernel on bare hardware
[ 0.118073] NET: Registered protocol family 16
[ 0.118716] ACPI: bus type pci registered
[ 0.122978] PCI: PCI BIOS revision 2.10 entry at 0xfc13e, last bus=1
[ 0.122988] PCI: Using configuration type 1
[ 0.123047] Setting up standard PCI resources
[ 0.128308] ACPI: EC: Look up EC in DSDT
[ 0.146431] ACPI: Interpreter enabled
[ 0.146444] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.146493] ACPI: Using PIC for interrupt routing
[ 0.187903] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.188477] pci 0000:00:07.3: quirk: region 0800-083f claimed by PIIX4 ACPI
[ 0.188489] pci 0000:00:07.3: quirk: region 0840-084f claimed by PIIX4 SMB
[ 0.188502] pci 0000:00:07.3: PIIX4 devres B PIO at 00e0-00e7
[ 0.188511] pci 0000:00:07.3: PIIX4 devres C PIO at 0850-085f
[ 0.188795] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.189139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.242720] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.243055] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[ 0.243334] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[ 0.243669] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[ 0.244004] ACPI: Power Resource [PADA] (on)
[ 0.244205] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.244312] pnp: PnP ACPI init
[ 0.244344] ACPI: bus type pnp registered
[ 0.338555] pnp: PnP ACPI: found 15 devices
[ 0.338566] ACPI: ACPI bus type pnp unregistered
[ 0.338580] PnPBIOS: Disabled by ACPI PNP
[ 0.339418] PCI: Using ACPI for IRQ routing
[ 0.339429] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.342560] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.342573] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.342584] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.342594] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.342604] system 00:00: iomem range 0x100000-0xffeffff could not be reserved
[ 0.342614] system 00:00: iomem range 0xfff0000-0xfffffff could not be reserved
[ 0.342625] system 00:00: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.342650] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.342660] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.342670] system 00:02: ioport range 0x808-0x80f has been reserved
[ 0.342680] system 00:02: ioport range 0x854-0x855 has been reserved
[ 0.342704] system 00:03: ioport range 0x806-0x807 has been reserved
[ 0.342714] system 00:03: ioport range 0x850-0x853 has been reserved
[ 0.342723] system 00:03: ioport range 0x856-0x85f has been reserved
[ 0.342733] system 00:03: ioport range 0x810-0x83f has been reserved
[ 0.342742] system 00:03: ioport range 0x840-0x84f has been reserved
[ 0.342754] system 00:03: ioport range 0x600-0x67f has been reserved
[ 0.342764] system 00:03: ioport range 0x680-0x6ff has been reserved
[ 0.342787] system 00:04: ioport range 0xf000-0xf0fe has been reserved
[ 0.342798] system 00:04: ioport range 0xf100-0xf1fe has been reserved
[ 0.342807] system 00:04: ioport range 0xf200-0xf2fe has been reserved
[ 0.342817] system 00:04: ioport range 0xf400-0xf4fe has been reserved
[ 0.342827] system 00:04: ioport range 0xf500-0xf5fe has been reserved
[ 0.342837] system 00:04: ioport range 0xf600-0xf6fe has been reserved
[ 0.342847] system 00:04: ioport range 0xf800-0xf8fe has been reserved
[ 0.342857] system 00:04: ioport range 0xf900-0xf9fe has been reserved
[ 0.342867] system 00:04: ioport range 0xfa00-0xfafe has been reserved
[ 0.342877] system 00:04: ioport range 0xfc00-0xfcfe has been reserved
[ 0.342886] system 00:04: ioport range 0xfd00-0xfdfe has been reserved
[ 0.342896] system 00:04: ioport range 0xfe00-0xfefe has been reserved
[ 0.342907] system 00:04: iomem range 0xed000000-0xedffffff has been reserved
[ 0.342934] system 00:09: ioport range 0x3f0-0x3f1 has been reserved
[ 0.374368] PCI: Bridge: 0000:00:01.0
[ 0.374378] IO window: e000-efff
[ 0.374387] MEM window: 0xfd000000-0xfeffffff
[ 0.374397] PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
[ 0.374410] PCI: Bus 2, cardbus bridge: 0000:00:03.0
[ 0.374417] IO window: 0x00001000-0x000010ff
[ 0.374426] IO window: 0x00001400-0x000014ff
[ 0.374435] PREFETCH window: 0x20000000-0x23ffffff
[ 0.374444] MEM window: 0x24000000-0x27ffffff
[ 0.374453] PCI: Bus 6, cardbus bridge: 0000:00:03.1
[ 0.374460] IO window: 0x00001800-0x000018ff
[ 0.374469] IO window: 0x00001c00-0x00001cff
[ 0.374478] PREFETCH window: 0x28000000-0x2bffffff
[ 0.374487] MEM window: 0x2c000000-0x2fffffff
[ 0.374529] PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
[ 0.375065] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.375075] PCI: setting IRQ 11 as level-triggered
[ 0.375084] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.375116] PCI: Enabling device 0000:00:03.1 (0000 -> 0003)
[ 0.375127] ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.375227] NET: Registered protocol family 2
[ 0.375541] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.376289] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.376478] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.376660] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.376668] TCP reno registered
[ 0.377251] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 1.357360] it is
[ 2.490923] Freeing initrd memory: 6941k freed
[ 2.493120] Simple Boot Flag at 0x79 set to 0x1
[ 2.494377] audit: initializing netlink socket (disabled)
[ 2.494417] type=2000 audit(1212497886.492:1): initialized
[ 2.494752] Total HugeTLB memory allocated, 0
[ 2.494968] VFS: Disk quotas dquot_6.5.1
[ 2.495070] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.495362] io scheduler noop registered
[ 2.495370] io scheduler anticipatory registered
[ 2.495377] io scheduler deadline registered
[ 2.495416] io scheduler cfq registered (default)
[ 2.495442] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 2.495491] pci 0000:01:00.0: Boot video device
[ 2.496929] isapnp: Scanning for PnP cards...
[ 2.850039] isapnp: No Plug & Play device found
[ 2.859100] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 2.859377] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.860704] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.863668] brd: module loaded
[ 2.864013] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.874061] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.874081] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.874573] mice: PS/2 mouse device common for all mice
[ 2.874769] cpuidle: using governor ladder
[ 2.874778] cpuidle: using governor menu
[ 2.876515] TCP cubic registered
[ 2.876546] NET: Registered protocol family 1
[ 2.876581] NET: Registered protocol family 17
[ 2.876599] Using IPI No-Shortcut mode
[ 2.877051] registered taskstats version 1
[ 2.878037] Freeing unused kernel memory: 252k freed
[ 2.886484] input: AT Translated Set 2 keyboard as /class/input/input0
[ 3.190753] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 3.190903] ACPI: ACPI0007:00 is registered as cooling_device0
[ 3.205790] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 3.209614] ACPI: Thermal Zone [THM] (51 C)
[ 4.538120] ACPI: ACPI Dock Station Driver
[ 4.861938] SCSI subsystem initialized
[ 5.270865] libata version 3.00 loaded.
[ 5.444302] Uniform Multi-Platform E-IDE driver
[ 5.444316] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 5.566949] usbcore: registered new interface driver usbfs
[ 5.567033] usbcore: registered new interface driver hub
[ 5.567318] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot 0000:00:07.1
[ 5.567349] PIIX4: not 100% native mode: will probe irqs later
[ 5.567371] ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:PIO
[ 5.567396] ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:PIO, hdd:PIO
[ 5.567416] Probing IDE interface ide0...
[ 5.576525] usbcore: registered new device driver usb
[ 5.596616] USB Universal Host Controller Interface driver v3.0
[ 5.688833] Floppy drive(s): fd0 is 1.44M
[ 5.705948] FDC 0 is a post-1991 82077
[ 5.856540] hda: SAMSUNG MP0402H, ATA DISK drive
[ 5.872367] Marking TSC unstable due to: TSC halts in idle.
[ 9.614290] Clocksource tsc unstable (delta = -3746042522 ns)
[ 9.781788] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 9.782908] hda: UDMA/33 mode selected
[ 9.782986] Probing IDE interface ide1...
[ 10.347914] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 10.348189] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 10.348216] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 10.348450] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 10.348495] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
[ 10.348909] usb usb1: configuration #1 chosen from 1 choice
[ 10.348986] hub 1-0:1.0: USB hub found
[ 10.349017] hub 1-0:1.0: 2 ports detected
[ 10.451593] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.451607] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.451617] usb usb1: Product: UHCI Host Controller
[ 10.451624] usb usb1: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 10.451632] usb usb1: SerialNumber: 0000:00:07.2
[ 10.543700] hda: max request size: 512KiB
[ 10.544611] hda: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=16383/255/63
[ 10.545047] hda: cache flushes supported
[ 10.545164] hda: hda1 hda2 hda4 < hda5 hda6 hda7 >
[ 10.690828] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 10.848637] usb 1-1: configuration #1 chosen from 1 choice
[ 10.851630] usb 1-1: New USB device found, idVendor=0592, idProduct=0002
[ 10.851644] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.851653] usb 1-1: Product: Powerware UPS
[ 10.851660] usb 1-1: Manufacturer: Powerware
[ 11.188950] device-mapper: uevent: version 1.0.3
[ 11.192000] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 64.238690] PM: Starting manual resume from disk
[ 64.379615] kjournald starting. Commit interval 5 seconds
[ 64.379648] EXT3-fs: mounted filesystem with journal data mode.
[ 69.369737] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 70.392017] Linux agpgart interface v0.103
[ 70.503416] agpgart: Detected an Intel 440BX Chipset.
[ 70.508314] agpgart: AGP aperture is 64M @ 0xf4000000
[ 70.585634] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 70.643864] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 70.863781] Yenta: CardBus bridge found at 0000:00:03.0 [1028:00b0]
[ 70.863811] Yenta: Using CSCINT to route CSC interrupts to PCI
...
-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-4) (maks@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Tue May 27 15:38:35 UTC 2008
** Command line:
root=/dev/mapper/scuzzie_36gb-scuzzie_36gb--i386 ro quiet
** Not tainted
** Kernel log:
(relevant portion is above)
** Loaded modules:
Module Size Used by
r128 34624 2
drm 72280 3 r128
xt_multiport 3104 8
nfsd 199568 2041
auth_rpcgss 39200 1 nfsd
exportfs 4768 1 nfsd
ppdev 8676 0
lp 11012 0
autofs4 20708 1
wmi 7880 0
container 4736 0
sbs 8544 0
sbshc 6784 1 sbs
speedstep_smi 5552 0
speedstep_lib 5316 1 speedstep_smi
cpufreq_stats 5216 0
cpufreq_ondemand 8428 0
freq_table 4512 3 speedstep_smi,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 7432 0
cpufreq_powersave 1856 0
cpufreq_userspace 3812 1
iptable_mangle 3264 0
iptable_nat 6728 1
iptable_filter 3424 1
ip_tables 13168 3 iptable_mangle,iptable_nat,iptable_filter
ipt_MASQUERADE 3776 1
nf_nat 18136 2 iptable_nat,ipt_MASQUERADE
nf_conntrack_ipv4 16616 3 iptable_nat,nf_nat
x_tables 15716 4 xt_multiport,iptable_nat,ip_tables,ipt_MASQUERADE
nf_conntrack 59892 4 iptable_nat,ipt_MASQUERADE,nf_nat,nf_conntrack_ipv4
nfs 225128 0
lockd 59752 3 nfsd,nfs
nfs_acl 3520 2 nfsd,nfs
sunrpc 171872 2038 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ipv6 241956 62
nls_utf8 2080 1
nls_cp437 5792 1
vfat 12160 1
fat 46880 1 vfat
nls_base 7268 4 nls_utf8,nls_cp437,vfat,fat
fuse 44348 15
i8k 6040 1
loop 16708 0
sd_mod 26072 6
usb_storage 76832 4
usbhid 40192 0
hid 36032 1 usbhid
ff_memless 5384 1 usbhid
asix 15744 0
usbnet 17928 1 asix
mii 5248 2 asix,usbnet
ehci_hcd 32620 0
ohci_hcd 21668 0
pcmcia 36044 0
parport_pc 25860 1
parport 33868 3 ppdev,lp,parport_pc
snd_maestro3 20964 0
button 8240 0
firmware_class 9088 2 pcmcia,snd_maestro3
snd_ac97_codec 91300 1 snd_maestro3
ac97_bus 1952 1 snd_ac97_codec
video 19728 0
output 3712 1 video
snd_pcm_oss 37824 0
snd_mixer_oss 14880 1 snd_pcm_oss
rtc 14272 0
snd_pcm 68228 3 snd_maestro3,snd_ac97_codec,snd_pcm_oss
snd_timer 21320 1 snd_pcm
snd_page_alloc 9992 1 snd_pcm
battery 8448 0
ac 4448 0
snd 48772 6 snd_maestro3,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
psmouse 35920 0
pcspkr 3136 0
serio_raw 6532 0
soundcore 7488 1 snd
i2c_piix4 8652 0
i2c_core 22548 1 i2c_piix4
yenta_socket 24300 3
rsrc_nonstatic 11584 1 yenta_socket
pcmcia_core 36436 3 pcmcia,yenta_socket,rsrc_nonstatic
shpchp 29716 0
pci_hotplug 26980 1 shpchp
intel_agp 25084 1
agpgart 31720 2 drm,intel_agp
evdev 11328 5
dcdbas 8064 0
ext3 120264 10
jbd 43444 1 ext3
mbcache 8260 1 ext3
dm_mirror 25316 0
dm_snapshot 17444 2
dm_mod 55656 23 dm_mirror,dm_snapshot
ide_disk 13952 5
ide_pci_generic 4228 0 [permanent]
floppy 53284 0
uhci_hcd 22352 0
piix 7176 0 [permanent]
usbcore 130032 9 usb_storage,usbhid,asix,usbnet,ehci_hcd,ohci_hcd,uhci_hcd
ide_core 100312 3 ide_disk,ide_pci_generic,piix
ata_generic 8004 0
libata 142032 1 ata_generic
scsi_mod 138508 3 sd_mod,usb_storage,libata
dock 10448 1 libata
thermal 19100 0
processor 39660 2 thermal
fan 5636 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd000000-feffffff
Prefetchable memory behind bridge: f8000000-fbffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:03.0 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51]
Subsystem: Dell Device [1028:00b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 30000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:03.1 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51]
Subsystem: Dell Device [1028:00b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 30001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 28000000-2bfff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 0860 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at dce0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:08.0 Multimedia audio controller [0401]: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator [125d:1998] (rev 10)
Subsystem: Dell Device [1028:00b0]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at f3ffe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel modules: snd-maestro3
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility M3 AGP 2x [1002:4c46] (rev 02)
Subsystem: Dell Device [1028:00b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at ec00 [size=256]
Region 2: Memory at fdffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: aty128fb
06:00.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
Subsystem: Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min, 10500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 2c000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
06:00.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
Subsystem: Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns min, 10500ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 2c001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
06:00.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20)
Subsystem: Device [1631:5040]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 68 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at 2c002000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core)
Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92b tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.25-2-686 recommends:
ii libc6-i686 2.7-11 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686:
linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false
linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686:
--- End Message ---