--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: Hangs at boot. Most likely because of ACPI settings.
- From: Magnus Ekdahl <maekd@mai.liu.se>
- Date: Tue, 13 Jul 2004 12:36:35 +0200
- Message-id: <40F3BB33.7060309@mai.liu.se>
Package: kernel-image-2.6.7-1-k7
Version: 2.6.7-2
Severity: normal
Hangs on a compaq(hp) nx9005 laptop with the last 3 lines beeing:
ACPI: Subsystem revision 20040326
spurious 8259A interupt: IRQ7.
ACPI: IRQ9 SCI: Level Trigger.
According to
http://www.consultmatt.co.uk/nx9005.php
selecting "Local APIC Support" in the kernel makes this laptop hang on
boot. I can't find any information under
/usr/share/doc/kernel-image-2.6.7-1-k7
that tells me if this is the case, or if it is what can be done about it.
It seems to work better with kernel-image-2.4.26-1-k7.
/Magnus Ekdahl
Linux version 2.4.26-1-k7 (herbert@gondolin) (gcc version 3.3.3 (Debian 20040401)) #1 Sat May 1 21:40:09 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
BIOS-e820: 000000003bef0000 - 000000003beff000 (ACPI data)
BIOS-e820: 000000003beff000 - 000000003bf00000 (ACPI NVS)
BIOS-e820: 000000003bf00000 - 000000003c000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
62MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 245488
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 16112 pages.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7450
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3bef8bbb
ACPI: FADT (v001 ATI Raptor 0x06040000 ATI 0x000f4240) @ 0x3befee2b
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3befee9f
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x3befeec7
ACPI: DSDT (v001 ATI U1_M1535 0x06040000 MSFT 0x0100000d) @ 0x00000000
Kernel command line: BOOT_IMAGE=Linux ro root=306
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1788.912 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3565.15 BogoMIPS
Memory: 963776k/981952k available (1207k kernel code, 17788k reserved, 459k data, 112k init, 64448k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD mobile AMD Athlon(tm) XP2400+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1788.9422 MHz.
..... host bus clock speed is 265.0284 MHz.
cpu: 0, clocks: 2650284, slice: 1325142
CPU0<T0:2650272,T1:1325120,D:10,S:1325142,C:2650284>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
PCI: Found IRQ 11 for device 00:0a.1
IRQ routing conflict for 00:0a.0, have irq 5, want irq 11
ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 3 for device 00:08.0
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (10b9,5457,103c,0024)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
register_serial(): autoconfig failed
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4152 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
Freeing initrd memory: 4152k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 112k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
Warning: ATI Radeon IGP Northbridge is not yet fully tested.
ALI15X3: IDE controller at PCI slot 00:10.0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:pio, hdd:pio
hda: IC25N040ATMR04-0, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
blk: queue f882a100, I/O limit 4095Mb (mask 0xffffffff)
hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 78140160 sectors (40008 MB) w/1740KiB Cache, CHS=4864/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 >
Journalled Block Device driver loaded
VFS: Can't find ext3 filesystem on dev ide0(3,6).
VFS: Can't find ext2 filesystem on dev ide0(3,6).
FAT: bogus logical sector size 0
VFS: Can't find a valid FAT filesystem on dev 03:06.
Unable to identify CD-ROM format.
NTFS driver v1.1.22 [Flags: R/O MODULE]
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,6)) ...
for (ide0(3,6))
ide0(3,6):Using r5 hash to sort names
VFS: Can't find ext3 filesystem on dev ide0(3,6).
VFS: Can't find ext2 filesystem on dev ide0(3,6).
FAT: bogus logical sector size 0
VFS: Can't find a valid FAT filesystem on dev 03:06.
Unable to identify CD-ROM format.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,6)) ...
for (ide0(3,6))
ide0(3,6):Using r5 hash to sort names
Adding Swap: 489940k swap-space (priority -1)
Real Time Clock Driver v1.10f
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Assigned IRQ 9 for device 00:02.0
usb-ohci.c: USB OHCI at membase 0xf89d4000, IRQ 9
usb-ohci.c: usb-00:02.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver usbkbd
usbkbd.c: :USB HID Boot Protocol keyboard driver
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
originally by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/natsemi.html
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
PCI: Found IRQ 11 for device 00:12.0
eth0: NatSemi DP8381[56] at 0xf89e3000, 00:0d:9d:59:67:ba, IRQ 11.
device-mapper: 4.0.5-ioctl (2003-11-18) initialised: dm@uk.sistina.com
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h, 22:21:44 May 1 2004
PCI: Found IRQ 5 for device 00:06.0
trident: ALi Audio Accelerator found at IO 0x8400, IRQ 5
ac97_codec: AC97 Modem codec, id: CXT41 (Unknown)
PCI: Found IRQ 5 for device 00:06.0
gameport0: ALi Corporation M5451 PCI AC-Link Controller Audio Device at pci00:06.0 speed 3139 kHz
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
PCI: Found IRQ 9 for device 00:0c.0
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[d0007000-d00077ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d9d719e43c44f]
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
Module Size Used by Not tainted
ohci1394 25616 0 (unused)
ieee1394 186564 0 [ohci1394]
trident 28532 1
ac97_codec 13396 0 [trident]
soundcore 3972 2 [trident]
pcigame 1704 0 [trident]
gameport 1676 0 [pcigame]
dm-mod 29608 0 (unused)
natsemi 16256 1
crc32 2880 0 [natsemi]
keybdev 2212 0 (unused)
usbkbd 3608 0 (unused)
input 3520 0 [keybdev usbkbd]
usb-ohci 19016 0 (unused)
usbcore 63020 1 [usbkbd usb-ohci]
rtc 7048 0 (autoclean)
reiserfs 187024 1 (autoclean)
ntfs 53824 0 (autoclean)
isofs 27092 0 (autoclean)
vfat 10700 0 (autoclean)
fat 32664 0 (autoclean) [vfat]
ext2 50440 0 (autoclean)
ext3 81352 0 (autoclean)
jbd 42148 0 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
ide-disk 16736 2 (autoclean)
alim15x3 7764 1 (autoclean)
ide-core 109628 2 (autoclean) [ide-detect ide-disk alim15x3]
unix 15340 106 (autoclean)
0000:00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at d0500000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at 8090 [disabled] [size=4]
Capabilities: <available only to root>
0000:00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: e0000000-efffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 0024
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at d0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device 0024
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 8400 [size=256]
Region 1: Memory at d0005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
0000:00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company: Unknown device 0024
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 3
Region 0: Memory at d0006000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 8800 [size=256]
Capabilities: <available only to root>
0000:00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)
Subsystem: Unknown device 6933:0002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=04, subordinate=07, sec-latency=32
Memory window 0: 81000000-81100000
I/O window 0: 00003000-0000307f
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-
16-bit legacy interface ports at 0001
0000:00:0a.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)
Subsystem: Unknown device 6933:0002
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 3c000000 (32-bit, non-prefetchable) [disabled] [size=4K]
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory window 0: 00000000-0000f000 [disabled]
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
16-bit legacy interface ports at 0001
0000:00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 0024
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at d0007000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>
0000:00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if b0)
Subsystem: Hewlett-Packard Company: Unknown device 0024
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 8080 [size=16]
Capabilities: <available only to root>
0000:00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
Subsystem: Hewlett-Packard Company: Unknown device 0024
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Subsystem: Hewlett-Packard Company: Unknown device 0024
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 90 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 8c00 [size=256]
Region 1: Memory at d0008000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
0000:01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1 (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company: Unknown device 0024
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
--- End Message ---