--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-amd64: PATA HD not detected with Intel ICH9 and Marvel 88SE6121 chipsets
- From: Laurent Aguerreche <laurent.aguerreche@free.fr>
- Date: Fri, 15 Aug 2008 22:04:42 +0200
- Message-id: <20080815200442.5142.80460.reportbug@shion.celestiadust>
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-2
Severity: important
Hello,
I have a MSI P35 Neo-F motherboard with an Intel ICH9 chipset and
a Marvel 88SE6121 chipset. The Marvel chipset is dedicated to control of
PATA devices (there is only one IDE port on this motherboard).
I connected a SATA HD to SATA port 1.
My DVD writer is connected to SATA port 2.
Two HD share the IDE port (one is master, the other slave...).
I installed a Debian SID on the SATA HD (this HD appears as /dev/sda).
The problem is that the Debian kernel does not make available the IDE
disks. It seems there are detected at some point during boot but there
are invisible with fdisk, parted or /proc/partitions.
I only see the SATA drives.
$ cat /proc/partitions
major minor #blocks name
8 0 244198584 sda
8 1 248976 sda1
8 2 1 sda2
8 5 1951866 sda5
8 6 24410736 sda6
8 7 217584328 sda7
Previous Debian kernel did not help...
I tried a Live-CD of a Fedora 10 Alpha and I have been able to access my
IDE HD without any problem. It uses a pre-release of a 2.6.27 kernel.
Here a snippet of dmesg with Fedora 10:
drivers/usb/core/inode.c: creating file '001'
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.27-0.166.rc0.git8.fc10.x86_64 ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.7
modprobe used greatest stack depth: 4080 bytes left
Pin 2-19 already programmed
pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
pata_acpi 0000:00:1f.2: PCI INT B disabled
Pin 2-19 already programmed
pata_acpi 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
pata_acpi 0000:00:1f.5: PCI INT B disabled
Pin 2-16 already programmed
pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
Pin 2-16 already programmed
pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi0 : pata_marvell
scsi1 : pata_marvell
ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
ata2: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00
0B:00 0C:07 0D:00 0E:00 0F:00
modprobe used greatest stack depth: 4024 bytes left
usb 1-1: new low speed USB device using uhci_hcd and address 3
usb 1-1: skipped 1 descriptor after interface
usb 1-1: default language 0x0409
ata1.00: ATA-4: ST320420A, 3.21, max UDMA/66
ata1.00: 39851760 sectors, multi 0: LBA
ata1.01: ATA-6: ST3120026A, 3.06, max UDMA/100
ata1.01: 234441648 sectors, multi 0: LBA48
usb 1-1: uevent
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: uevent
usbhid 1-1:1.0: usb_probe_interface
usbhid 1-1:1.0: usb_probe_interface - got id
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/100
BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00
0B:00 0C:07 0D:00 0E:00 0F:00
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input3
input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse
with IntelliEye(TM)] on usb-0000:00:1a.0-1
drivers/usb/core/inode.c: creating file '003'
usb 1-1: New USB device found, idVendor=045e, idProduct=0053
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 1-1: Manufacturer: Microsoft
hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 8-0:1.0: state 7 ports 8 chg 0000 evt 0000
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1a.1: port 2 portsc 01a3,00
hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access ATA ST320420A 3.21 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 39851760 512-byte hardware sectors (20404 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 39851760 512-byte hardware sectors (20404 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access ATA ST3120026A 3.06 PQ: 0
ANSI: 5
sd 0:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1 sdb2
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:1:0: Attached scsi generic sg1 type 0
ata_piix 0000:00:1f.2: version 2.12
Pin 2-19 already programmed
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: skipped 1 descriptor after interface
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: uevent
usbhid 2-2:1.0: usb_probe_interface
usbhid 2-2:1.0: usb_probe_interface - got id
input: Logitech Logitech USB Keyboard as
/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input4
uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard]
on usb-0000:00:1a.1-2
usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: uevent
usbhid 2-2:1.1: usb_probe_interface
usbhid 2-2:1.1: usb_probe_interface - got id
input: Logitech Logitech USB Keyboard as
/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/input/input5
uhci_hcd 0000:00:1a.1: reserve dev 2 ep82-INT, period 32, phase 16, 118
us
input,hidraw2: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on
usb-0000:00:1a.1-2
drivers/usb/core/inode.c: creating file '002'
usb 2-2: New USB device found, idVendor=046d, idProduct=c30a
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Logitech USB Keyboard
usb 2-2: Manufacturer: Logitech
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
usb usb4: suspend_rh (auto-stop)
usb usb5: suspend_rh (auto-stop)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: MAXTOR STM3250310AS, 3.AAF, max UDMA/133
ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
usb usb6: suspend_rh (auto-stop)
usb usb7: suspend_rh (auto-stop)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: PIONEER DVD-RW DVR-212D, 1.24, max UDMA/66
ata4.00: configured for UDMA/66
scsi 2:0:0:0: Direct-Access ATA MAXTOR STM325031 3.AA PQ: 0
ANSI: 5
sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 >
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-212D 1.24 PQ: 0
ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
Pin 2-19 already programmed
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
modprobe used greatest stack depth: 2576 bytes left
modprobe used greatest stack depth: 2416 bytes left
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
usb usb4: suspend_rh
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
ehci_hcd 0000:00:1a.7: suspend root hub
hub 5-0:1.0: hub_suspend
usb usb5: bus auto-suspend
usb usb5: suspend_rh
hub 6-0:1.0: hub_suspend
usb usb6: bus auto-suspend
usb usb6: suspend_rh
hub 7-0:1.0: hub_suspend
usb usb7: bus auto-suspend
usb usb7: suspend_rh
hub 8-0:1.0: hub_suspend
usb usb8: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
Now, lsmod with Fedora 10:
Module Size Used by
vfat 18816 1
fat 54344 1 vfat
bridge 60208 0
stp 11140 1 bridge
bnep 21632 2
rfcomm 44728 4
l2cap 28944 16 bnep,rfcomm
bluetooth 63860 5 bnep,rfcomm,l2cap
fuse 60112 4
sunrpc 197840 3
ipv6 296920 22
cpufreq_ondemand 16160 1
acpi_cpufreq 17296 1
freq_table 13440 2 cpufreq_ondemand,acpi_cpufreq
dm_mirror 26168 0
dm_log 18048 1 dm_mirror
snd_hda_intel 486244 3
snd_seq_dummy 11524 0
snd_seq_oss 40272 0
snd_seq_midi_event 15240 1 snd_seq_oss
snd_seq 64072 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 15900 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 52624 0
snd_mixer_oss 23560 1 snd_pcm_oss
snd_pcm 87216 2 snd_hda_intel,snd_pcm_oss
ppdev 15880 0
snd_timer 30496 2 snd_seq,snd_pcm
snd_page_alloc 17040 2 snd_hda_intel,snd_pcm
parport_pc 34456 0
snd_hwdep 16912 1 snd_hda_intel
iTCO_wdt 20352 0
snd 71336 16
snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
i2c_i801 18588 0
iTCO_vendor_support 11780 1 iTCO_wdt
r8169 37660 0
parport 44076 2 ppdev,parport_pc
serio_raw 14468 0
pcspkr 11136 0
i2c_core 30224 1 i2c_i801
soundcore 15120 1 snd
ext3 132536 3
jbd 56680 1 ext3
mbcache 16256 1 ext3
dm_snapshot 25952 1
dm_mod 64552 6 dm_mirror,dm_log,dm_snapshot
squashfs 44856 2
ahci 39816 0
ata_generic 14212 0
ata_piix 28292 4
pata_marvell 12928 3
pata_acpi 13440 0
ehci_hcd 55720 0
uhci_hcd 40488 0
loop 24092 10
sr_mod 24228 1
cdrom 41000 1 sr_mod
And /proc/partitions with Fedora 10:
major minor #blocks name
7 0 8 loop0
7 1 1232 loop1
7 2 709560 loop2
7 3 4194304 loop3
7 4 524288 loop4
8 0 19925880 sda
8 1 17824086 sda1
8 2 1 sda2
8 5 2096451 sda5
8 16 117220824 sdb
8 17 995998 sdb1
8 18 116222242 sdb2
8 32 244198584 sdc
8 33 248976 sdc1
8 34 1 sdc2
8 37 1951866 sdc5
8 38 24410736 sdc6
8 39 217584328 sdc7
253 0 4194304 dm-0
253 1 4194304 dm-1
That's all!
Laurent.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-2) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Aug 8 13:17:41 UTC 2008
** Command line:
root=/dev/sda6 ro
** Tainted: P (1)
** Kernel log:
[ 3.304612] usbcore: registered new interface driver usbhid
[ 3.304653] usbhid: v2.6:USB HID core driver
[ 3.337532] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.345647] ata2.00: ATAPI: PIONEER DVD-RW DVR-212D, 1.24, max UDMA/66
[ 3.361119] ata2.00: configured for UDMA/66
[ 3.361188] isa bounce pool size: 16 pages
[ 3.361287] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325031 3.AA PQ: 0 ANSI: 5
[ 3.367920] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-212D 1.24 PQ: 0 ANSI: 5
[ 3.367920] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.367920] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.367920] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 3.367920] scsi2 : ata_piix
[ 3.367920] scsi3 : ata_piix
[ 3.368404] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 3.371921] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 3.703564] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.035390] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.039024] ahci 0000:03:00.0: version 3.0
[ 4.039024] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.039024] ahci 0000:03:00.0: controller can't do NCQ, turning off CAP_NCQ
[ 4.039024] ahci 0000:03:00.0: MV_AHCI HACK: port_map 7 -> 3
[ 5.314370] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
[ 5.314424] ahci 0000:03:00.0: flags: 64bit stag led pmp slum part
[ 5.314468] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 5.318338] scsi4 : ahci
[ 5.318338] scsi5 : ahci
[ 5.318838] scsi6 : ahci
[ 5.318838] ata5: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 16
[ 5.318838] ata6: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 16
[ 5.318838] ata7: DUMMY
[ 6.023345] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.343343] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.355328] Driver 'sd' needs updating - please use bus_type methods
[ 6.355328] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.355328] sd 0:0:0:0: [sda] Write Protect is off
[ 6.355328] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.355328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.355328] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.355328] sd 0:0:0:0: [sda] Write Protect is off
[ 6.355328] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.355328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.355328] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.365773] sda5 sda6 sda7 >
[ 6.384017] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.402971] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 6.403018] Uniform CD-ROM driver Revision: 3.20
[ 6.403116] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.411329] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.411329] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.663100] device-mapper: uevent: version 1.0.3
[ 6.663329] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 6.675947] PM: Starting manual resume from disk
[ 6.709422] kjournald starting. Commit interval 5 seconds
[ 6.710857] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.141388] udevd version 125 started
[ 8.825511] input: Power Button (FF) as /class/input/input4
[ 8.848995] ACPI: Power Button (FF) [PWRF]
[ 8.849126] input: Power Button (CM) as /class/input/input5
[ 8.880375] ACPI: Power Button (CM) [PWRB]
[ 9.113309] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 9.152910] pnp: the driver 'parport_pc' has been registered
[ 9.152910] parport_pc 00:07: reported by Plug and Play ACPI
[ 9.152910] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 9.164871] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 9.164871] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[ 9.164871] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.164910] input: PC Speaker as /class/input/input6
[ 9.234031] Error: Driver 'pcspkr' is already registered, aborting...
[ 9.253490] parport_pc 00:07: driver attached
[ 9.381687] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 9.381786] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 9.414750] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 10.725804] Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k
[ 11.038748] EXT3 FS on sda6, internal journal
[ 11.751422] loop: module loaded
[ 103.912101] fuse init (API version 7.9)
[ 104.182728] kjournald starting. Commit interval 5 seconds
[ 104.182728] EXT3 FS on sda1, internal journal
[ 104.182728] EXT3-fs: mounted filesystem with ordered data mode.
[ 104.228666] kjournald starting. Commit interval 5 seconds
[ 104.228720] EXT3 FS on sda7, internal journal
[ 104.228787] EXT3-fs: mounted filesystem with ordered data mode.
[ 105.935277] r8169: eth0: link up
[ 105.935314] r8169: eth0: link up
[ 106.527325] firmware: requesting intel-ucode/06-17-06
[ 106.621687] firmware: requesting intel-ucode/06-17-06
[ 106.621687] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 106.680866] microcode: CPU0 updated from revision 0x606 to 0x60b, date = 01192008
[ 106.686498] microcode: CPU1 updated from revision 0x606 to 0x60b, date = 01192008
[ 109.619873] NET: Registered protocol family 10
[ 109.621032] lo: Disabled Privacy Extensions
[ 109.810689] lp0: using parport0 (interrupt-driven).
[ 109.835456] ppdev: user-space parallel port driver
[ 112.174582] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 115.067286] nvidia: module license 'NVIDIA' taints kernel.
[ 115.323530] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 115.323543] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 115.323651] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008
[ 117.850485] NVRM: Xid (0001:00): 40
[10718.775973] NVRM: Xid (0001:00): 40
** Loaded modules:
Module Size Used by
nvidia 8105072 24
ppdev 11656 0
lp 14724 0
ipv6 288200 26
video 24084 0
output 7808 1 video
ac 8192 0
battery 12032 0
acpi_cpufreq 11792 1
cpufreq_powersave 6400 0
cpufreq_ondemand 11792 1
cpufreq_conservative 11784 0
cpufreq_userspace 8452 0
cpufreq_stats 9120 0
freq_table 9344 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
microcode 15160 0
firmware_class 12544 1 microcode
fuse 53184 1
loop 19468 0
snd_hda_intel 434776 3
snd_seq_dummy 7428 0
snd_seq_oss 33152 0
snd_seq_midi 11072 0
snd_rawmidi 26784 1 snd_seq_midi
snd_pcm_oss 41760 0
psmouse 42268 0
snd_mixer_oss 18816 1 snd_pcm_oss
snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi
pcspkr 7040 0
iTCO_wdt 15696 0
parport_pc 31016 1
parport 41776 3 ppdev,lp,parport_pc
snd_pcm 81800 2 snd_hda_intel,snd_pcm_oss
serio_raw 9860 0
i2c_i801 13596 0
snd_seq 54304 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 25744 2 snd_pcm,snd_seq
i2c_core 27936 2 nvidia,i2c_i801
snd_seq_device 11668 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 63688 15 snd_hda_intel,snd_seq_oss,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
evdev 14208 4
button 11680 0
intel_agp 31728 0
ext3 124688 3
jbd 51240 1 ext3
mbcache 12804 1 ext3
dm_mirror 20608 0
dm_log 13956 1 dm_mirror
dm_snapshot 19400 0
dm_mod 58864 3 dm_mirror,dm_log,dm_snapshot
sg 36448 0
sr_mod 19652 0
cdrom 37928 1 sr_mod
sd_mod 29376 5
pata_marvell 8832 0
ata_generic 10116 0
usbhid 45792 0
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
ahci 32520 0
ata_piix 22660 4
libata 165472 4 pata_marvell,ata_generic,ahci,ata_piix
scsi_mod 160760 4 sg,sr_mod,sd_mod,libata
dock 14112 1 libata
r8169 31492 0
ide_pci_generic 9220 0 [permanent]
ide_core 128284 1 ide_pci_generic
ehci_hcd 36108 0
uhci_hcd 25760 0
thermal 22688 0
processor 42304 2 acpi_cpufreq,thermal
fan 9352 0
thermal_sys 17728 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at ac00 [size=4]
Region 2: I/O ports at a880 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a480 [size=16]
Region 5: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic, ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7360]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic, ata_piix, ata_generic
01:00.0 VGA compatible controller [0300]: nVidia Corporation Geforce 9600 GT 512mb [10de:0622] (rev a1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
[virtual] Expansion ROM at fe980000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ide-pci-generic, ahci, pata_marvell, ata_generic
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:360c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 1275
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
--- End Message ---