[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#463788: marked as done (b43legacy oopses)



Your message dated Wed, 24 Dec 2008 15:12:14 +0100
with message-id <20081224141214.GB6518@galadriel.inutil.org>
and subject line Re: Bug#463788: b43legacy oopses
has caused the Debian Bug report #463788,
regarding b43legacy oopses
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
463788: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463788
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.24-1-powerpc
Version: 2.6.24-2
Severity: normal

Hi,

The "b43legacy" driver produces an oops on my system (an Apple PowerBook
G4, 1.3Ghz). Please see the kernel dmesg output below for details.

(or ask me, if that's not enough...)

-- Package-specific info:
** Version:
Linux version 2.6.24-1-powerpc (Debian 2.6.24-2) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 Thu Jan 31 18:52:10 CET 2008

** Command line:
root=/dev/hda5 ro resume=/dev/hda3 

** Tainted: G (128)

** Kernel log:
b43-phy0: Broadcom 4306 WLAN found
phy0: Selected rate control algorithm 'simple'
udev: renamed network interface wmaster0 to eth1
Adding 1009972k swap on /dev/hda3.  Priority:-1 extents:1 across:1009972k
EXT3 FS on hda5, internal journal
input: PowerMac Beep as /class/input/input7
adt746x: version 1 (supported)
adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
sensor 0: HDD BOTTOMSIDE
sensor 1: CPU TOPSIDE
sensor 2: GPU ON DIE
adt746x: ADT7460 initializing
adt746x: Lowering max temperatures from 73, 80, 109 to 70, 50, 70
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
lp: driver loaded but no devices found
ADDRCONF(NETDEV_UP): eth0: link is not ready
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
hda: host max PIO4 wanted PIO0 selected PIO0
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
usb 1-1: USB disconnect, address 2
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
usb 1-1: new full speed USB device using ohci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
hda: host max PIO4 wanted PIO0 selected PIO0
hda: host max PIO4 wanted PIO0 selected PIO0
hda: host max PIO4 wanted PIO0 selected PIO0
hda: host max PIO4 wanted PIO0 selected PIO0
hda: host max PIO4 wanted PIO0 selected PIO0
hda: host max PIO4 wanted PIO0 selected PIO0
hda: host max PIO4 wanted PIO0 selected PIO0
hda: host max PIO4 wanted PIO0 selected PIO0
hda: host max PIO4 wanted PIO0 selected PIO0
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /class/input/input8
input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0001:10:1b.0-1
hda: host max PIO4 wanted PIO0 selected PIO0
hda: host max PIO4 wanted PIO0 selected PIO0
b43-phy1: Broadcom 4306 WLAN found
phy1: Selected rate control algorithm 'simple'
udev: renamed network interface wmaster0 to eth1
input: b43-phy1 as /class/input/input9
b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
b43-phy1 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
input: b43-phy1 as /class/input/input10
b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
b43-phy1 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
input: b43-phy1 as /class/input/input11
b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
b43-phy1 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
hda: host max PIO4 wanted PIO0 selected PIO0
eth0: Link is up at 100 Mbps, half-duplex.
eth0: Pause is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: Link is up at 100 Mbps, half-duplex.
eth0: Pause is disabled
hda: host max PIO4 wanted PIO0 selected PIO0
Unable to handle kernel paging request for instruction fetch
Faulting instruction address: 0xf6253b14
Oops: Kernel access of bad area, sig: 11 [#1]
PowerMac
Modules linked in: rfkill_input binfmt_misc hci_usb rfcomm l2cap bluetooth nfsd exportfs lp parport autofs4 ipv6 rpcsec_gss_krb5 auth_rpcgss nfs lockd nfs_acl sunrpc nls_utf8 hfsplus dm_crypt dm_mirror cpufreq_conservative cpufreq_ondemand cpufreq_powersave dm_snapshot dm_mod therm_adt746x snd_powermac cpufreq_userspace snd_aoa_i2sbus snd_pcm_oss snd_pcm snd_page_alloc snd_mixer_oss snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event arc4 snd_seq snd_timer snd_seq_device ecb blkcipher snd soundcore snd_aoa_soundbus rfkill uninorth_agp agpgart mac80211 evdev cfg80211 input_polldev ext3 jbd mbcache firewire_ohci sungem sungem_phy firewire_core crc_itu_t ide_disk ehci_hcd usbhid ide_cd hid ff_memless cdrom ssb pcmcia pcmcia_core firmware_class i2c_powermac
NIP: f6253b14 LR: f2088158 CTR: f6253b14
REGS: ee7ffeb0 TRAP: 0400   Not tainted  (2.6.24-1-powerpc)
MSR: 40009032 <EE,ME,IR,DR>  CR: 24000084  XER: 00000000
TASK = ef912f30[10060] 'ipolldevd' THREAD: ee7fe000
GPR00: f6253b14 ee7fff60 ef912f30 eefca6a0 ee7fffa8 00000001 00005ec0 0000039e 
GPR08: ee7fffb4 ee968760 eefca6b8 ffffffff 00000000 00000000 00000000 00000000 
GPR16: 00000000 00000000 00000000 00000000 00000000 016ecff8 41400000 016eeea0 
GPR24: 00000000 003f1000 c03ac4b0 eefca6b4 c03b0000 eefca6a0 f2088130 ee968760 
NIP [f6253b14] 0xf6253b14
LR [f2088158] input_polled_device_work+0x28/0x5c [input_polldev]
Call Trace:
[ee7fff60] [c0008a28] __switch_to+0x74/0x8c (unreliable)
[ee7fff80] [c0042268] run_workqueue+0xb4/0x148
[ee7fffa0] [c0042834] worker_thread+0xd8/0xf4
[ee7fffd0] [c0046844] kthread+0x4c/0x88
[ee7ffff0] [c0013404] kernel_thread+0x44/0x60
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX 
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX 
---[ end trace c82e7ba47a431aec ]---

** Loaded modules:
Module                  Size  Used by
rfkill_input            4800  0 
binfmt_misc            13256  1 
hci_usb                16796  2 
rfcomm                 45524  5 
l2cap                  25956  9 rfcomm
bluetooth              67916  7 hci_usb,rfcomm,l2cap
nfsd                  248404  13 
exportfs                5248  1 nfsd
lp                     13548  0 
parport                43472  1 lp
autofs4                24932  1 
ipv6                  295860  41 
rpcsec_gss_krb5        10760  0 
auth_rpcgss            48260  2 nfsd,rpcsec_gss_krb5
nfs                   294856  0 
lockd                  77752  3 nfsd,nfs
nfs_acl                 4032  2 nfsd,nfs
sunrpc                213516  12 nfsd,rpcsec_gss_krb5,auth_rpcgss,nfs,lockd,nfs_acl
nls_utf8                2208  1 
hfsplus                92516  1 
dm_crypt               16836  0 
dm_mirror              25728  0 
cpufreq_conservative     8864  0 
cpufreq_ondemand        9544  0 
cpufreq_powersave       1824  0 
dm_snapshot            21184  0 
dm_mod                 70180  3 dm_crypt,dm_mirror,dm_snapshot
therm_adt746x          13612  0 
snd_powermac           48416  2 
cpufreq_userspace       4760  1 
snd_aoa_i2sbus         24388  0 
snd_pcm_oss            49216  1 
snd_pcm                92100  3 snd_powermac,snd_aoa_i2sbus,snd_pcm_oss
snd_page_alloc         11912  1 snd_pcm
snd_mixer_oss          20384  1 snd_pcm_oss
snd_seq_oss            39700  0 
snd_seq_midi            9600  0 
snd_rawmidi            28352  1 snd_seq_midi
snd_seq_midi_event      8160  2 snd_seq_oss,snd_seq_midi
arc4                    1984  0 
snd_seq                61064  5 snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              26180  2 snd_pcm,snd_seq
snd_seq_device          9452  4 snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ecb                     4064  0 
blkcipher               8388  1 ecb
snd                    67668  12 snd_powermac,snd_aoa_i2sbus,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               8900  2 snd
snd_aoa_soundbus        7620  1 snd_aoa_i2sbus
rfkill                  9008  4 rfkill_input
uninorth_agp           11692  1 
agpgart                40156  1 uninorth_agp
mac80211              143486  0 
evdev                  13984  17 
cfg80211               16688  1 mac80211
input_polldev           5832  0 
ext3                  156328  1 
jbd                    56212  1 ext3
mbcache                 9568  1 ext3
firewire_ohci          22464  0 
sungem                 35268  0 
sungem_phy             12928  1 sungem
firewire_core          49912  1 firewire_ohci
crc_itu_t               2112  1 firewire_core
ide_disk               18816  4 
ehci_hcd               38892  0 
usbhid                 49252  0 
ide_cd                 47108  0 
hid                    44036  1 usbhid
ff_memless              6184  1 usbhid
cdrom                  42812  1 ide_cd
ssb                    40132  0 
pcmcia                 45872  1 ssb
pcmcia_core            46904  1 pcmcia
firmware_class         11104  1 pcmcia
i2c_powermac            5984  0 

** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 16, Cache Line Size: 32 bytes
	Capabilities: <access denied>
	Kernel driver in use: agpgart-uninorth
	Kernel modules: uninorth-agp

0000:00:10.0 VGA compatible controller [0300]: nVidia Corporation NV34M [GeForce FX Go5200] [10de:0329] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: nVidia Corporation Powerbook G4 [10de:0010]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 248 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 48
	Region 0: Memory at 91000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at a0000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at 90000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidiafb

0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 16, Cache Line Size: 32 bytes
	Kernel modules: uninorth-agp

0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
	Subsystem: Apple Computer Inc. AirPort Extreme [106b:004e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16
	Interrupt: pin A routed to IRQ 52
	Region 0: Memory at 80084000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: b43-pci-bridge
	Kernel modules: ssb

0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16, Cache Line Size: 32 bytes
	Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
	Kernel driver in use: macio

0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 27

0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 28

0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at 80083000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 63
	Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 63
	Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
	Subsystem: NEC Corporation USB 2.0 [1033:00e0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 63
	Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 16, Cache Line Size: 32 bytes
	Kernel modules: uninorth-agp

0002:20:0d.0 Unknown class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin ? routed to IRQ 39
	Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
	Kernel driver in use: ide-pmac

0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI])
	Subsystem: Apple Computer Inc. iBook G4 2004 [106b:5811]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 40
	Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire-ohci

0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 41
	Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
	Expansion ROM at f5100000 [disabled] [size=1M]
	Kernel driver in use: gem
	Kernel modules: sungem



-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc)

Kernel: Linux 2.6.24-1-powerpc
Locale: LANG=nl_BE.UTF-8, LC_CTYPE=nl_BE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.24-1-powerpc depends on:
ii  debconf [debconf-2.0]        1.5.19      Debian configuration management sy
ii  initramfs-tools [linux-initr 0.91d       tools for generating an initramfs
ii  module-init-tools            3.3-pre11-4 tools for managing Linux kernel mo
ii  yaird [linux-initramfs-tool] 0.0.12-25   Yet Another mkInitRD

linux-image-2.6.24-1-powerpc recommends no packages.

-- debconf information:
  linux-image-2.6.24-1-powerpc/postinst/bootloader-test-error-2.6.24-1-powerpc:
  linux-image-2.6.24-1-powerpc/postinst/depmod-error-2.6.24-1-powerpc: false
  linux-image-2.6.24-1-powerpc/preinst/lilo-initrd-2.6.24-1-powerpc: true
  linux-image-2.6.24-1-powerpc/prerm/removing-running-kernel-2.6.24-1-powerpc: true
  linux-image-2.6.24-1-powerpc/preinst/initrd-2.6.24-1-powerpc:
  linux-image-2.6.24-1-powerpc/preinst/overwriting-modules-2.6.24-1-powerpc: true
  linux-image-2.6.24-1-powerpc/postinst/old-initrd-link-2.6.24-1-powerpc: true
  linux-image-2.6.24-1-powerpc/preinst/elilo-initrd-2.6.24-1-powerpc: true
  linux-image-2.6.24-1-powerpc/preinst/abort-overwrite-2.6.24-1-powerpc:
  linux-image-2.6.24-1-powerpc/preinst/bootloader-initrd-2.6.24-1-powerpc: true
  linux-image-2.6.24-1-powerpc/preinst/lilo-has-ramdisk:
  linux-image-2.6.24-1-powerpc/preinst/abort-install-2.6.24-1-powerpc:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.24-1-powerpc/preinst/failed-to-move-modules-2.6.24-1-powerpc:
  linux-image-2.6.24-1-powerpc/postinst/create-kimage-link-2.6.24-1-powerpc: true
  linux-image-2.6.24-1-powerpc/postinst/old-dir-initrd-link-2.6.24-1-powerpc: true
  linux-image-2.6.24-1-powerpc/prerm/would-invalidate-boot-loader-2.6.24-1-powerpc: true
  linux-image-2.6.24-1-powerpc/postinst/old-system-map-link-2.6.24-1-powerpc: true
  linux-image-2.6.24-1-powerpc/postinst/depmod-error-initrd-2.6.24-1-powerpc: false
  linux-image-2.6.24-1-powerpc/postinst/kimage-is-a-directory:
  linux-image-2.6.24-1-powerpc/postinst/bootloader-error-2.6.24-1-powerpc:



--- End Message ---
--- Begin Message ---
Version: 2.6.26-11

On Wed, Dec 24, 2008 at 05:11:39AM +0100, Wouter Verhelst wrote:
> On Wed, Dec 17, 2008 at 10:01:57PM +0100, Moritz Muehlenhoff wrote:
> > On Tue, May 13, 2008 at 02:32:03AM +0200, maximilian attems wrote:
> > > On Sun, 03 Feb 2008, Wouter Verhelst wrote:
> > > > Package: linux-image-2.6.24-1-powerpc
> > > > Version: 2.6.24-2
> > > > Severity: normal
> > > > 
> > > > Hi,
> > > > 
> > > > The "b43legacy" driver produces an oops on my system (an Apple PowerBook
> > > > G4, 1.3Ghz). Please see the kernel dmesg output below for details.
> > > > 
> > > > (or ask me, if that's not enough...)
> > > 
> > > please recheck against 2.6.25 from sid?
> > >  
> > > is it reproducible there?
> > 
> > Wouter, does this error still occur with the Lenny kernel?
> 
> Sorry, I either forgot or did not notice maximilian's question.
> 
> I just tried with the kernel in sid, 2.6.26-1-powerpc, and the bug does
> not exist there.
> 
> If you really want me to try this with the lenny kernel too, I'll have
> to go and install that then. I'm offline right now, though, so can't do
> so. Please let me know if you want me to try that, and I will.

Thanks, I assume you tested -11, then? (-12 migrated to Lenny a couple days ago)

Since there were no further changes b43 further testing isn't needed.

Cheers,
        Moritz


--- End Message ---

Reply to: