--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: kernel: "pci: cannot allocate resource region..." warrning or error after memory upgrade
- From: Nadav Kavalerchik <nadavkav@netvision.net.il>
- Date: Mon, 21 Jan 2008 21:59:48 +0200
- Message-id: <200801212159.49339.nadavkav@netvision.net.il>
Package: linux-image-2.6.23-1-686
Version: 2.6.23-2
Severity: normal
File: kernel
after upgrading one of the two 256MB RAM sims i have (on my Compaq presario
1500) to 1GB simm, i was starting to get these errors or warnings in the
kernel's log file:
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:01.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1e.0
PCI: Cannot allocate resource region 0 of device 0000:01:00.0
PCI: Cannot allocate resource region 2 of device 0000:01:00.0
PCI: Cannot allocate resource region 0 of device 0000:02:05.0
PCI: Cannot allocate resource region 1 of device 0000:02:05.0
PCI: Cannot allocate resource region 0 of device 0000:02:06.0
PCI: Cannot allocate resource region 0 of device 0000:02:08.0
PCI: Cannot allocate resource region 0 of device 0000:02:0e.0
PCI: Cannot allocate resource region 0 of device 0000:02:0e.1
PCI: Cannot allocate resource region 0 of device 0000:02:0e.2
i use the entire memory without any problem so i'm not sure if this and error
i am not aware of (yet) or just a warning ?
-- Package-specific info:
** Version:
Linux version 2.6.23-1-686 (Debian 2.6.23-2) (maks@debian.org) (gcc version
4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #1 SMP Fri Dec 21 13:57:07 UTC
2007
** cmdline:
root=/dev/hda1 ro init=/sbin/initng quiet
** Not tainted
** Kernel log:
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
input: SynPS/2 Synaptics TouchPad as /class/input/input3
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Linux agpgart interface v0.102
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
irda_init()
NET: Registered protocol family 23
agpgart: Detected an Intel 845G Chipset.
agpgart: AGP aperture is 256M @ 0x60000000
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [C17A]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [C120]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [C11F]
ACPI: Battery Slot [C11E] (battery present)
ACPI: AC Adapter [C11B] (on-line)
nsc_ircc_pnp_probe() : From PnP, found firbase 0x3E8 ; irq 3 ; dma 3.
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x3e8
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x3e8
pnp: Device 00:04 disabled.
intel_rng: FWH not detected
Yenta: CardBus bridge found at 0000:02:06.0 [0e11:004e]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x012c1202, devctl 0x64
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000020
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x85ffffff
pcmcia: parent PCI bridge Memory window: 0x7c000000 - 0x7fffffff
pccard: CardBus card inserted into slot 0
ACPI: PCI Interrupt Link [C0B6] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0B6] -> GSI 5 (level, low) ->
IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno@linux.intel.com>
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
bcm43xx driver
intel8x0_measure_ac97_clock: measured 54791 usecs
intel8x0: clocking to 48000
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [C0B8] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:03:00.0 to 64
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
net eth2: device_rename: sysfs_create_symlink failed (-17)
udev: renamed network interface eth0 to eth2
EXT3 FS on hda1, internal journal
loop: module loaded
Adding 1253028k swap on /dev/hda5. Priority:-1 extents:1 across:1253028k
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
SoftMAC: Open Authentication completed with 00:18:39:bc:52:67
ttyS2: LSR safety check engaged!
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [C0B5] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0B5] -> GSI 11 (level, low) ->
IRQ 11
[drm] Initialized radeon 1.28.0 20060524 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 2 usecs
** Loaded modules:
Module Size Used by
radeon 112512 2
drm 75668 3 radeon
firewire_sbp2 14188 0
cpufreq_ondemand 8332 0
p4_clockmod 5444 0
speedstep_lib 5220 1 p4_clockmod
freq_table 4544 2 cpufreq_ondemand,p4_clockmod
cpufreq_powersave 1856 0
loop 17092 0
bcm43xx 417280 0
ieee80211softmac 27008 1 bcm43xx
ieee80211 31656 2 bcm43xx,ieee80211softmac
ieee80211_crypt 5920 1 ieee80211
snd_intel8x0 32092 1
snd_ac97_codec 92388 1 snd_intel8x0
ac97_bus 2336 1 snd_ac97_codec
snd_pcm_oss 39104 0
snd_pcm 72132 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_mixer_oss 15296 1 snd_pcm_oss
snd_seq_dummy 3812 0
snd_seq_oss 29440 0
pcmcia 37388 0
firmware_class 9472 2 bcm43xx,pcmcia
snd_seq_midi 8192 0
snd_rawmidi 22656 1 snd_seq_midi
snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
snd_seq 46544 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 21156 2 snd_pcm,snd_seq
snd_seq_device 7852 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
yenta_socket 24908 2
rsrc_nonstatic 11904 1 yenta_socket
irtty_sir 8160 0
pcmcia_core 37076 3 pcmcia,yenta_socket,rsrc_nonstatic
sir_dev 15492 1 irtty_sir
snd 48356 12
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
joydev 9792 0
ac 5636 0
battery 12296 0
container 4928 0
button 8336 0
intel_agp 23348 1
irda 174396 2 irtty_sir,sir_dev
soundcore 7584 1 snd
snd_page_alloc 10088 2 snd_intel8x0,snd_pcm
parport_pc 34020 0
parport 34088 1 parport_pc
agpgart 31624 2 drm,intel_agp
iTCO_wdt 11172 0
shpchp 31028 0
pci_hotplug 28128 1 shpchp
crc_ccitt 2208 1 irda
evdev 9472 6
psmouse 36368 0
tsdev 8160 0
serio_raw 6724 0
rtc 12984 0
pcspkr 3264 0
ext3 121544 1
jbd 55368 1 ext3
mbcache 8320 1 ext3
ide_cd 36384 0
cdrom 32608 1 ide_cd
ide_disk 16544 3
generic 4804 0 [permanent]
usbhid 27232 0
hid 26944 1 usbhid
piix 8932 0 [permanent]
ide_core 112484 4 ide_cd,ide_disk,generic,piix
ehci_hcd 31372 0
ohci_hcd 20324 0
ata_generic 7588 0
firewire_ohci 16640 0
e100 33612 0
mii 5344 1 e100
firewire_core 39072 2 firewire_sbp2,firewire_ohci
crc_itu_t 2208 1 firewire_core
usbcore 130568 4 usbhid,ehci_hcd,ohci_hcd
libata 113488 1 ata_generic
scsi_mod 136684 2 firewire_sbp2,libata
floppy 54820 0
thermal 15580 0
processor 34696 1 thermal
fan 5092 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845 845 (Brookdale) Chipset
Host Bridge [8086:1a30] (rev 04)
Subsystem: Compaq Computer Corporation Unknown device [0e11:004e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at 60000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+
AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 (Brookdale) Chipset AGP
Bridge [8086:1a31] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 86000000-860fffff
Prefetchable memory behind bridge: 70000000-7bffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 42) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 80000000-85ffffff
Prefetchable memory behind bridge: 7c000000-7fffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC)
[8086:248c] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100 [8086:248a]
(rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation Unknown device [0e11:004e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 4440 [size=16]
Region 5: Memory at 86100000 (32-bit, non-prefetchable) [size=1K]
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801CA/CAM
AC'97 Audio Controller [8086:2485] (rev 02)
Subsystem: Compaq Computer Corporation Unknown device [0e11:004e]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 4000 [size=256]
Region 1: I/O ports at 4400 [size=64]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility
M7 LW [Radeon Mobility 7500] [1002:4c57] (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation Unknown device [0e11:004e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 70000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at 86000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 78000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW-
AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device [1179:ff01]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 66 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 84008000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 84000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
02:06.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus
Controller [104c:ac50] (rev 02)
Subsystem: Compaq Computer Corporation Unknown device [0e11:004e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 84004000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 7c000000-7ffff000 (prefetchable)
Memory window 1: 80000000-83fff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
02:08.0 Ethernet controller [0200]: Intel Corporation 82801CAM (ICH3) PRO/100
VE (LOM) Ethernet Controller [8086:1031] (rev 42)
Subsystem: Compaq Computer Corporation Unknown device [0e11:004e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 84005000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:0e.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
(prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation Unknown device [0e11:004e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 84006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0e.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
(prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation Unknown device [0e11:004e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 84007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0e.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02)
(prog-if 20 [EHCI])
Subsystem: Compaq Computer Corporation Unknown device [0e11:004e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at 84008800 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Linksys WPC54G [1737:4320]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.23-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.23-1-686 depends on:
ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel
mo
linux-image-2.6.23-1-686 recommends no packages.
-- debconf information:
linux-image-2.6.23-1-686/prerm/removing-running-kernel-2.6.23-1-686: true
linux-image-2.6.23-1-686/postinst/old-system-map-link-2.6.23-1-686: true
linux-image-2.6.23-1-686/preinst/abort-overwrite-2.6.23-1-686:
linux-image-2.6.23-1-686/postinst/create-kimage-link-2.6.23-1-686: true
linux-image-2.6.23-1-686/preinst/failed-to-move-modules-2.6.23-1-686:
linux-image-2.6.23-1-686/preinst/lilo-initrd-2.6.23-1-686: true
linux-image-2.6.23-1-686/postinst/depmod-error-initrd-2.6.23-1-686: false
linux-image-2.6.23-1-686/preinst/elilo-initrd-2.6.23-1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.23-1-686/preinst/overwriting-modules-2.6.23-1-686: true
* linux-image-2.6.23-1-686/preinst/already-running-this-2.6.23-1-686:
linux-image-2.6.23-1-686/preinst/initrd-2.6.23-1-686:
linux-image-2.6.23-1-686/preinst/abort-install-2.6.23-1-686:
linux-image-2.6.23-1-686/postinst/depmod-error-2.6.23-1-686: false
linux-image-2.6.23-1-686/postinst/old-dir-initrd-link-2.6.23-1-686: true
linux-image-2.6.23-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.23-1-686/preinst/bootloader-initrd-2.6.23-1-686: true
linux-image-2.6.23-1-686/prerm/would-invalidate-boot-loader-2.6.23-1-686:
true
linux-image-2.6.23-1-686/postinst/old-initrd-link-2.6.23-1-686: true
linux-image-2.6.23-1-686/postinst/bootloader-error-2.6.23-1-686:
linux-image-2.6.23-1-686/postinst/bootloader-test-error-2.6.23-1-686:
linux-image-2.6.23-1-686/postinst/kimage-is-a-directory:
--- End Message ---