[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#469287: marked as done (linux-image-2.6.22-3-amd64: WD360ADFD-00 harddisk should probably put in libata blacklist due to "spurious completions during NCQ" errors)



Your message dated Thu, 18 Dec 2008 21:29:43 +0100
with message-id <20081218202943.GA1832@inutil.org>
and subject line Re: linux-image-2.6.22-3-amd64: WD360ADFD-00 harddisk should probably put in libata blacklist due to "spurious completions during NCQ" errors
has caused the Debian Bug report #469287,
regarding linux-image-2.6.22-3-amd64: WD360ADFD-00 harddisk should probably put in libata blacklist due to "spurious completions during NCQ" errors
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
469287: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=469287
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.22-3-amd64
Version: 2.6.22-6
Severity: normal


Loads of "spurious completions during NCQ" errors. See the logging
below:


-- Package-specific info:
** Version:
Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) (maks@debian.org) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007

** Not tainted

** Kernel log:
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
setiathome_enha[10251]: segfault at 0000000040000098 rip 00002af030cbdc9e rsp 00000000400000a0 error 6
setiathome_enha[18266]: segfault at 0000000040000098 rip 00002aabae605c9e rsp 00000000400000a0 error 6
setiathome_enha[2253]: segfault at 0000000040000098 rip 00002b11c5dc6c9e rsp 00000000400000a0 error 6
ata1.00: exception Emask 0x2 SAct 0x800f SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x800f FIS=004040a1:00004000)
ata1.00: cmd 61/10:00:f5:82:b1/00:00:00:00:00/40 tag 0 cdb 0x0 data 8192 out
         res 40/00:18:15:04:af/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/10:08:65:f5:17/00:00:04:00:00/40 tag 1 cdb 0x0 data 8192 out
         res 40/00:18:15:04:af/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:10:15:56:36/00:00:00:00:00/40 tag 2 cdb 0x0 data 4096 out
         res 40/00:18:15:04:af/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/10:18:15:04:af/00:00:00:00:00/40 tag 3 cdb 0x0 data 8192 out
         res 40/00:18:15:04:af/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:78:ed:82:b1/00:00:00:00:00/40 tag 15 cdb 0x0 data 4096 out
         res 40/00:18:15:04:af/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: exception Emask 0x2 SAct 0x7 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x7 FIS=004040a1:00000080)
ata1.00: cmd 61/00:00:ad:dd:1f/04:00:01:00:00/40 tag 0 cdb 0x0 data 524288 out
         res 40/00:38:95:30:43/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/00:08:ad:e1:1f/04:00:01:00:00/40 tag 1 cdb 0x0 data 524288 out
         res 40/00:38:95:30:43/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/00:10:ad:e5:1f/04:00:01:00:00/40 tag 2 cdb 0x0 data 524288 out
         res 40/00:38:95:30:43/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
mboxstats[12391]: segfault at 00007fff8f3f3d90 rip 0000000000403842 rsp 00007fff8f3e8e30 error 6
mboxstats[12393]: segfault at 00007fff9172c0d0 rip 0000000000403842 rsp 00007fff91721170 error 6
mboxstats[14463]: segfault at 00007fffdfd74d00 rip 0000000000403842 rsp 00007fffdfd69d90 error 6
einstein_S5R3_4[11113]: segfault at 00000000f7f9bcbc rip 00000000f7e4f677 rsp 00000000f7f9bcc0 error 6
setiathome_enha[17053]: segfault at 0000000040000098 rip 00002b5ed3c6cc9e rsp 00000000400000a0 error 6
setiathome_enha[16719]: segfault at 0000000040000098 rip 00002ab8098e0c9e rsp 00000000400000a0 error 6
setiathome_enha[26400]: segfault at 0000000040000098 rip 00002ae98e73ac9e rsp 00000000400000a0 error 6
ata1.00: exception Emask 0x2 SAct 0x8 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x8 FIS=004040a1:00000004)
ata1.00: cmd 61/10:18:8d:4f:33/00:00:04:00:00/40 tag 3 cdb 0x0 data 8192 out
         res 40/00:18:8d:4f:33/00:00:04:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
setiathome_enha[14219]: segfault at 0000000040000098 rip 00002ac98c1eac9e rsp 00000000400000a0 error 6
einstein_S5R3_4[28775]: segfault at 00000000f7f74cbc rip 00000000f7e28677 rsp 00000000f7f74cc0 error 6
setiathome_enha[15005]: segfault at 0000000040000098 rip 00002b30d24bdc9e rsp 00000000400000a0 error 6
setiathome_enha[2496]: segfault at 0000000040000098 rip 00002b55cd74fc9e rsp 00000000400000a0 error 6
einstein_S5R3_4[17373]: segfault at 00000000f7fa5cbc rip 00000000f7e59677 rsp 00000000f7fa5cc0 error 6
einstein_S5R3_4[30618]: segfault at 00000000f7f4bcbc rip 00000000f7dff677 rsp 00000000f7f4bcc0 error 6
mboxstats[28058]: segfault at 00007fff47b4eae0 rip 0000000000403842 rsp 00007fff47b43b70 error 6
ata1.00: exception Emask 0x2 SAct 0xc002 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0xc002 FIS=004040a1:00002000)
ata1.00: cmd 61/08:08:cd:5e:b2/00:00:00:00:00/40 tag 1 cdb 0x0 data 4096 out
         res 40/00:08:cd:5e:b2/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:70:05:b6:6c/00:00:00:00:00/40 tag 14 cdb 0x0 data 4096 out
         res 40/00:08:cd:5e:b2/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:78:8d:b4:6d/00:00:00:00:00/40 tag 15 cdb 0x0 data 4096 out
         res 40/00:08:cd:5e:b2/00:00:00:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
mboxstats[4232]: segfault at 00007fffdf80f7a0 rip 0000000000403842 rsp 00007fffdf804830 error 6
ata1.00: exception Emask 0x2 SAct 0x7000 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x7000 FIS=004040a1:00000800)
ata1.00: cmd 61/10:60:05:f7:19/00:00:04:00:00/40 tag 12 cdb 0x0 data 8192 out
         res 40/00:70:85:74:1a/00:00:04:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/18:68:fd:33:1a/00:00:04:00:00/40 tag 13 cdb 0x0 data 12288 out
         res 40/00:70:85:74:1a/00:00:04:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/18:70:85:74:1a/00:00:04:00:00/40 tag 14 cdb 0x0 data 12288 out
         res 40/00:70:85:74:1a/00:00:04:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors (37020 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
i2c /dev entries driver

** Loaded modules:
Module                  Size  Used by
i2c_dev                12424  0 
ppp_deflate            10624  0 
zlib_deflate           24088  1 ppp_deflate
bsd_comp               10240  0 
ppp_async              16384  0 
ppp_generic            33568  3 ppp_deflate,bsd_comp,ppp_async
nfs                   255192  3 
ipt_owner               6400  7 
ip6t_REJECT            10112  75 
ip6table_filter         7424  1 
ip6_tables             18888  1 ip6table_filter
ipt_recent             14880  2 
xt_limit                7552  4 
xt_state                7040  4 
ipt_REJECT              9216  83 
ipt_MASQUERADE          8192  1 
ipt_TOS                 6656  20 
xt_tcpudp               7808  265 
iptable_mangle          7424  1 
iptable_nat            12292  1 
nf_conntrack_ipv4      24592  5 iptable_nat
nf_nat_irc              7168  0 
nf_conntrack_irc       12448  1 nf_nat_irc
nf_nat_ftp              7936  0 
nf_nat                 25260  4 ipt_MASQUERADE,iptable_nat,nf_nat_irc,nf_nat_ftp
nf_conntrack_ftp       15328  1 nf_nat_ftp
nf_conntrack           75356  9 xt_state,ipt_MASQUERADE,iptable_nat,nf_conntrack_ipv4,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ftp
nfnetlink              10824  3 nf_conntrack_ipv4,nf_nat,nf_conntrack
iptable_filter          7552  1 
ip_tables              24680  3 iptable_mangle,iptable_nat,iptable_filter
x_tables               24712  12 ipt_owner,ip6t_REJECT,ip6_tables,ipt_recent,xt_limit,xt_state,ipt_REJECT,ipt_MASQUERADE,ipt_TOS,xt_tcpudp,iptable_nat,ip_tables
ext2                   70416  0 
i915                   31488  2 
drm                   100776  3 i915
nfsd                  260392  13 
exportfs               10368  1 nfsd
lockd                  72752  3 nfs,nfsd
nfs_acl                 8064  2 nfs,nfsd
sunrpc                186632  11 nfs,nfsd,lockd,nfs_acl
ppdev                  13704  0 
lp                     17352  2 
button                 13472  0 
ac                     10376  0 
battery                15496  0 
microcode              16536  0 
firmware_class         15360  1 microcode
ipv6                  296840  78 ip6t_REJECT
quota_v2               13568  0 
dm_snapshot            21704  0 
dm_mirror              26240  0 
dm_mod                 64112  2 dm_snapshot,dm_mirror
coretemp               12544  0 
firewire_sbp2          18180  0 
firewire_core          49728  1 firewire_sbp2
crc_itu_t               6656  1 firewire_core
loop                   23044  0 
pl2303                 25092  1 
tsdev                  13312  0 
snd_hda_intel         311968  1 
snd_usb_audio          93600  0 
snd_seq_dummy           8452  0 
hisax                 401088  0 
isdn                  138976  1 hisax
snd_pcm_oss            48288  1 
snd_mixer_oss          21376  1 snd_pcm_oss
slhc                   10624  2 ppp_generic,isdn
snd_seq_oss            36736  0 
snd_pcm                89992  3 snd_hda_intel,snd_usb_audio,snd_pcm_oss
snd_usb_lib            22016  1 snd_usb_audio
snd_seq_midi           13504  0 
snd_seq_midi_event     12416  2 snd_seq_oss,snd_seq_midi
snd_seq                58752  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_rawmidi            30624  2 snd_usb_lib,snd_seq_midi
i2c_i801               13468  0 
snd_timer              28424  2 snd_pcm,snd_seq
psmouse                45468  0 
serio_raw              11780  0 
snd_seq_device         12820  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
wcfxo                  17056  0 
pcspkr                  7680  0 
snd_hwdep              14728  1 snd_usb_audio
snd                    65896  11 snd_hda_intel,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_pcm,snd_seq,snd_rawmidi,snd_timer,snd_seq_device,snd_hwdep
zaptel                199528  7 wcfxo
parport_pc             42664  1 
parport                44428  3 ppdev,lp,parport_pc
i2c_core               31488  2 i2c_dev,i2c_i801
plusb                   7424  0 
usbnet                 24584  1 plusb
mii                    10240  1 usbnet
crc_ccitt               6656  3 ppp_async,hisax,zaptel
rtl8150                18304  0 
soundcore              13088  2 snd
snd_page_alloc         15376  2 snd_hda_intel,snd_pcm
usbserial              40816  3 pl2303
pwc                    89920  0 
compat_ioctl32         13056  1 pwc
videodev               32512  1 pwc
v4l2_common            24320  2 compat_ioctl32,videodev
v4l1_compat            16388  1 videodev
iTCO_wdt               15824  0 
intel_agp              32032  1 
evdev                  15232  3 
ext3                  137232  1 
jbd                    68080  1 ext3
mbcache                13832  2 ext2,ext3
usbhid                 32704  0 
hid                    31360  1 usbhid
sg                     41128  0 
sr_mod                 22564  0 
cdrom                  39848  1 sr_mod
pata_marvell           12416  0 
ata_generic            13188  0 
sd_mod                 33280  3 
ns83820                24968  0 
ahci                   28804  2 
libata                132528  3 pata_marvell,ata_generic,ahci
scsi_mod              164536  5 firewire_sbp2,sg,sr_mod,sd_mod,libata
generic                10372  0 [permanent]
ide_core              147728  1 generic
ehci_hcd               37900  0 
uhci_hcd               29856  0 
e1000                 127552  0 
thermal                19600  0 
processor              39912  1 thermal
fan                     9992  0 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation 82G965 Integrated Graphics Controller [8086:29a2] (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=1M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 3410 [size=8]
	Capabilities: <access denied>

00:03.0 Communication controller [0780]: Intel Corporation 82P965/G965 HECI Controller [8086:29a4] (rev 02)
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e0326100 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02)
	Subsystem: Intel Corporation Unknown device [8086:0001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 1273
	Region 0: Memory at e0300000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at e0324000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 30e0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000
	Kernel modules: e1000

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 30c0 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at 30a0 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at e0325c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
	Subsystem: Intel Corporation Unknown device [8086:2504]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at e0320000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: e0100000-e01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 3080 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 3060 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 3040 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e0325800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: e0000000-e00fffff
	Prefetchable memory behind bridge: 00000000e0400000-00000000e04fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller [8086:2812] (rev 02)
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel modules: iTCO_wdt

00:1f.2 SATA controller [0106]: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA AHCI Controller [8086:2821] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 1274
	Region 0: I/O ports at 3408 [size=8]
	Region 1: I/O ports at 341c [size=4]
	Region 2: I/O ports at 3400 [size=8]
	Region 3: I/O ports at 3418 [size=4]
	Region 4: I/O ports at 3020 [size=32]
	Region 5: Memory at e0325000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
	Subsystem: Intel Corporation Unknown device [8086:514d]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at e0326000 (32-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 3000 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 2018 [size=8]
	Region 1: I/O ports at 2024 [size=4]
	Region 2: I/O ports at 2010 [size=8]
	Region 3: I/O ports at 2020 [size=4]
	Region 4: I/O ports at 2000 [size=16]
	Region 5: Memory at e0100000 (32-bit, non-prefetchable) [size=512]
	Capabilities: <access denied>
	Kernel driver in use: pata_marvell
	Kernel modules: generic, ata_generic, pata_marvell

06:00.0 Serial controller [0700]: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) [1409:7168] (rev 01) (prog-if 02 [16550])
	Subsystem: Timedia Technology Co Ltd Unknown device [1409:4037]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at 1800 [size=32]
	Kernel driver in use: serial

06:01.0 Ethernet controller [0200]: National Semiconductor Corporation DP83820 10/100/1000 Ethernet Controller [100b:0022]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2750ns min, 13000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at 1400 [size=256]
	Region 1: Memory at e0001000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at e0400000 [disabled] [size=64K]
	Kernel driver in use: ns83820
	Kernel modules: ns83820

06:02.0 Communication controller [0780]: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface [e159:0001]
	Subsystem: Intel Corporation Digium X100P/X101P analogue PSTN FXO interface [8086:0003]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (250ns min, 32000ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 1000 [size=256]
	Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: wcfxo
	Kernel modules: hisax, wcopenpci, wcfxo



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.22-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.22-3-amd64 depends on:
ii  e2fsprogs                    1.40.6-1    ext2 file system utilities and lib
ii  initramfs-tools [linux-initr 0.91e       tools for generating an initramfs
ii  module-init-tools            3.3-pre11-4 tools for managing Linux kernel mo

linux-image-2.6.22-3-amd64 recommends no packages.

-- debconf information:
  linux-image-2.6.22-3-amd64/postinst/old-system-map-link-2.6.22-3-amd64: true
  linux-image-2.6.22-3-amd64/preinst/failed-to-move-modules-2.6.22-3-amd64:
  linux-image-2.6.22-3-amd64/prerm/removing-running-kernel-2.6.22-3-amd64: true
  linux-image-2.6.22-3-amd64/postinst/bootloader-error-2.6.22-3-amd64:
  linux-image-2.6.22-3-amd64/postinst/old-initrd-link-2.6.22-3-amd64: true
  linux-image-2.6.22-3-amd64/postinst/bootloader-test-error-2.6.22-3-amd64:
  linux-image-2.6.22-3-amd64/preinst/bootloader-initrd-2.6.22-3-amd64: true
  linux-image-2.6.22-3-amd64/preinst/lilo-initrd-2.6.22-3-amd64: true
  linux-image-2.6.22-3-amd64/preinst/abort-install-2.6.22-3-amd64:
  linux-image-2.6.22-3-amd64/preinst/elilo-initrd-2.6.22-3-amd64: true
  linux-image-2.6.22-3-amd64/preinst/initrd-2.6.22-3-amd64:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.22-3-amd64/postinst/create-kimage-link-2.6.22-3-amd64: true
  linux-image-2.6.22-3-amd64/postinst/depmod-error-initrd-2.6.22-3-amd64: false
  linux-image-2.6.22-3-amd64/prerm/would-invalidate-boot-loader-2.6.22-3-amd64: true
  linux-image-2.6.22-3-amd64/preinst/overwriting-modules-2.6.22-3-amd64: true
  linux-image-2.6.22-3-amd64/postinst/depmod-error-2.6.22-3-amd64: false
  linux-image-2.6.22-3-amd64/preinst/abort-overwrite-2.6.22-3-amd64:
  linux-image-2.6.22-3-amd64/preinst/already-running-this-2.6.22-3-amd64:
  linux-image-2.6.22-3-amd64/preinst/lilo-has-ramdisk:
  linux-image-2.6.22-3-amd64/postinst/old-dir-initrd-link-2.6.22-3-amd64: true
  linux-image-2.6.22-3-amd64/postinst/kimage-is-a-directory:



--- End Message ---
--- Begin Message ---
Version: 2.6.26-1

On Thu, Dec 18, 2008 at 08:36:28AM +0100, Folkert van Heusden wrote:
> > > Package: linux-image-2.6.22-3-amd64
> > > Version: 2.6.22-6
> > > Severity: normal
> > > Loads of "spurious completions during NCQ" errors. See the logging
> > > below:
> > 
> > Does this error still occur with more recent kernel versions?
> 
> Nope, seems to be fixed.

Ok, marking 2.6.26 version as closed.

Cheers,
        Moritz


--- End Message ---

Reply to: