--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.25-2-686: Computer freezes until key or touchpad pressed
- From: Eloi Notario <entfe001@gmail.com>
- Date: Sat, 06 Sep 2008 21:13:15 +0100
- Message-id: <48C2E45B.3040709@gmail.com>
Package: linux-image-2.6.25-2-686
Version: 2.6.25-6
Severity: important
*** Please type your report below this line ***
From time to time the computer (a Samsung R60+ laptop bought one month
ago) gets completely frozen until I press any key or the touchpad, then
resume normal operation. Eventually I'll get some "lost syncronization"
errors on dmesg about the touchpad, but I'm not quite sure if this is
the cause or a consequence.
I've read a lot of people having trouble about the psmouse's lost sync
error, but all the solutions proposed I've found (passing proto=bare,
imps or exps to the psmouse module or booting with i8042.nomux, for
instance) didn't work for me. Furthermore, this behavior also happen if
I don't run the X server at all, so I'd discard any X driver issue.
This problem is quite annoying because it means that I can't leave the
computer unattended working on something because it'll freeze until I
came back. Also the synchronization errors on the touchpad make X
sessions quite unusable after the first or second freeze: the cursor
behave erraticly and almost impossible to control.
As this problem disrupt the normal use, I'm classyfing this issue as
"important".
I've tried 2.6.26 but with the same results. I changed back to 2.6.25
due to some module issues: I'm not in the mood for recompiling them for
a kernel that gives me the same problems which, in fact, also means that
those self-compiled modules, particularly ATI's fglrx and MadWifi's
ath_pci, had nothing to do with the issue.
On the other hand, with 2.6.24 I had several "CPU#0 stuck for 116s!"
errors. I hadn't tried previous kernels than that (I'm on Lenny).
-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-6) (maks@debian.org) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jun
27 03:23:20 UTC 2008
** Command line:
root=UUID=e876d890-0ff6-4a1b-8d47-dd50bdd4e0b1 ro quiet
** Tainted: P (1)
** Kernel log:
[ 4.802911] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.808841] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.808841] ata1.00: configured for UDMA/133
[ 5.117641] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.428878] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.740041] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.500978] scsi 0:0:0:0: Direct-Access ATA SAMSUNG
HM160HI HH10 PQ: 0 ANSI: 5
[ 5.740405] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level,
low) -> IRQ 19
[ 5.740427] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 5.740477] ehci_hcd 0000:00:13.5: new USB bus registered, assigned
bus number 6
[ 5.740527] ehci_hcd 0000:00:13.5: debug port 1
[ 5.740546] ehci_hcd 0000:00:13.5: irq 19, io mem 0xd0509400
[ 5.740607] usb 2-1: USB disconnect, address 2
[ 5.752038] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 5.752249] usb usb6: configuration #1 chosen from 1 choice
[ 5.752293] hub 6-0:1.0: USB hub found
[ 5.752303] hub 6-0:1.0: 10 ports detected
[ 5.855886] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.855891] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.855896] usb usb6: Product: EHCI Host Controller
[ 5.855900] usb usb6: Manufacturer: Linux 2.6.25-2-686 ehci_hcd
[ 5.855903] usb usb6: SerialNumber: 0000:00:13.5
[ 5.864735] Uniform Multi-Platform E-IDE driver
[ 5.864741] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 5.865432] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at
PCI slot 0000:00:14.1
[ 5.865447] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level,
low) -> IRQ 16
[ 5.865461] SB600_PATA: not 100% native mode: will probe irqs later
[ 5.865471] ide0: BM-DMA at 0x8420-0x8427, BIOS settings:
hda:DMA, hdb:PIO
[ 5.865484] Probing IDE interface ide0...
[ 5.657919] Driver 'sd' needs updating - please use bus_type methods
[ 5.658077] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors
(160042 MB)
[ 5.658108] sd 0:0:0:0: [sda] Write Protect is off
[ 5.658113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.658164] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.658272] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors
(160042 MB)
[ 5.658300] sd 0:0:0:0: [sda] Write Protect is off
[ 5.658304] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.658353] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.658359] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 5.718510] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.110050] usb 6-3: new high speed USB device using ehci_hcd and
address 2
[ 6.283546] usb 6-3: configuration #1 chosen from 1 choice
[ 6.284204] usb 6-3: New USB device found, idVendor=0ac8, idProduct=c302
[ 6.284209] usb 6-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 6.284214] usb 6-3: Product: Vega USB 2.0 Camera.
[ 6.284217] usb 6-3: Manufacturer: Vimicro Corp.
[ 6.592985] hda: Slimtype DVD A DS8A1P, ATAPI CD/DVD-ROM drive
[ 7.263130] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 7.264101] hda: UDMA/33 mode selected
[ 7.265138] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 7.057149] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 7.057160] Uniform CD-ROM driver Revision: 3.20
[ 7.167105] PM: Starting manual resume from disk
[ 7.484958] kjournald starting. Commit interval 5 seconds
[ 7.484958] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.122384] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.335063] ath_hal: module license 'Proprietary' taints kernel.
[ 10.358344] AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413,
RF5413, RF2133, RF2425, RF2417)
[ 10.477721] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 10.477739] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 10.977556] MadWifi: ath_attach: Switching rfkill capability off.
[ 10.796819] Linux agpgart interface v0.103
[ 10.923855] input: Power Button (FF) as /class/input/input1
[ 10.976375] ACPI: Power Button (FF) [PWRF]
[ 10.976499] input: Power Button (CM) as /class/input/input2
[ 11.171126] wifi0: Atheros AR2425 chip found (MAC 14.2, PHY SChip
7.0, Radio 10.2)
[ 11.040389] ACPI: Power Button (CM) [PWRB]
[ 11.040494] input: Lid Switch as /class/input/input3
[ 11.234851] ath_pci: wifi0: Atheros 5424/2424: mem=0xd0100000, irq=17
[ 11.054367] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.072541] ACPI: Lid Switch [LID0]
[ 11.072648] input: Sleep Button (CM) as /class/input/input4
[ 11.120401] ACPI: Sleep Button (CM) [SLPB]
[ 11.120847] ACPI: AC Adapter [ADP1] (on-line)
[ 11.121180] ACPI: Battery Slot [BAT1] (battery absent)
[ 11.303530] input: Video Bus as /class/input/input5
[ 11.360481] ACPI: Video Device [ATIM] (multi-head: yes rom: no
post: no)
[ 11.361775] input: Video Bus as /class/input/input6
[ 11.420517] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 11.865898] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 11.916107] input: PC Speaker as /class/input/input7
[ 11.951441] Real Time Clock Driver v1.12ac
[ 12.415569] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level,
low) -> IRQ 16
[ 12.451859] hda_codec: Unknown model for ALC262, trying auto-probe
from BIOS...
[ 12.596334] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1,
caps: 0xa04711/0xa00000
[ 12.628478] input: SynPS/2 Synaptics TouchPad as /class/input/input8
[ 13.522634] Adding 5727132k swap on /dev/sda5. Priority:-1
extents:1 across:5727132k
[ 13.902929] EXT3 FS on sda2, internal journal
[ 14.198188] loop: module loaded
[ 138.998492] kjournald starting. Commit interval 5 seconds
[ 138.998723] EXT3 FS on sda6, internal journal
[ 138.998723] EXT3-fs: mounted filesystem with ordered data mode.
[ 140.980939] sky2 eth0: enabling interface
[ 142.705836] sky2 eth0: Link is up at 100 Mbps, full duplex, flow
control rx
[ 149.982442] lp: driver loaded but no devices found
[ 150.047280] ppdev: user-space parallel port driver
[ 162.876671] NET: Registered protocol family 10
[ 162.877744] lo: Disabled Privacy Extensions
[ 173.290639] eth0: no IPv6 routers present
[ 258.287980] psmouse.c: TouchPad at isa0060/serio4/input0 lost
synchronization, throwing 1 bytes away.
** Loaded modules:
Module Size Used by
ipv6 241956 12
ppdev 8676 0
parport_pc 25860 0
lp 11012 0
parport 33868 3 ppdev,parport_pc,lp
acpi_cpufreq 9260 2
cpufreq_userspace 3812 0
cpufreq_conservative 7432 0
cpufreq_powersave 1856 0
cpufreq_stats 5216 0
cpufreq_ondemand 8428 1
freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
loop 16708 0
joydev 11328 0
snd_hda_intel 309976 0
snd_pcm_oss 37824 0
snd_mixer_oss 14880 1 snd_pcm_oss
snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
snd_timer 21320 1 snd_pcm
snd 48772 5
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7488 1 snd
snd_page_alloc 9992 2 snd_hda_intel,snd_pcm
rtc 14272 0
serio_raw 6532 0
pcspkr 3136 0
psmouse 35920 0
i2c_piix4 8652 0
i2c_core 22548 1 i2c_piix4
wlan_scan_sta 13216 0
video 19728 0
output 3712 1 video
battery 8448 0
ath_rate_sample 12320 1
ac 4448 0
button 8240 0
shpchp 29716 0
ati_agp 8524 0
agpgart 31720 1 ati_agp
ath_pci 213016 0
wlan 201232 4 wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 301696 3 ath_rate_sample,ath_pci
pci_hotplug 26980 1 shpchp
evdev 11328 7
ext3 120360 2
jbd 43444 1 ext3
mbcache 8260 1 ext3
ide_cd_mod 32864 0
cdrom 31872 1 ide_cd_mod
ide_pci_generic 4228 0 [permanent]
sd_mod 26072 4
atiixp 4004 0 [permanent]
ide_core 100312 3 ide_cd_mod,ide_pci_generic,atiixp
ata_generic 8004 0
ahci 27336 3
ehci_hcd 32620 0
ohci_hcd 21668 0
libata 142288 2 ata_generic,ahci
usbcore 130032 3 ehci_hcd,ohci_hcd
scsi_mod 138668 2 sd_mod,libata
dock 10448 1 libata
sky2 42500 0
thermal 19100 0
processor 39660 4 acpi_cpufreq,thermal
fan 5636 0
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc Device [1002:7930]
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Kernel modules: ati-agp
00:01.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:7932]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0000000-d00fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:05.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:7935]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
Memory behind bridge: d0100000-d01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:06.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:7936]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d0200000-d02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:7937]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=08, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5
SATA [1002:4380] (prog-if 01)
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8438 [size=8]
Region 1: I/O ports at 8444 [size=4]
Region 2: I/O ports at 8430 [size=8]
Region 3: I/O ports at 8440 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at d0509000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0)
[1002:4387] (prog-if 10)
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0304000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1)
[1002:4388] (prog-if 10)
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0305000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2)
[1002:4389] (prog-if 10)
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0306000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3)
[1002:438a] (prog-if 10)
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0307000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4)
[1002:438b] (prog-if 10)
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0308000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB
Controller (EHCI) [1002:4386] (prog-if 20)
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d0509400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
[1002:4385] (rev 14)
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8410 [size=16]
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE
[1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8420 [size=16]
Kernel driver in use: ATIIXP_IDE
Kernel modules: atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383]
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at d0300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC
Bridge [1002:438d]
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI
Bridge [1002:4384] (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=0b, subordinate=0d, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon
Xpress 1250 [1002:7942]
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 9000 [size=256]
Capabilities: <access denied>
Kernel modules: fglrx
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x
802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Askey Computer Corp. Device [144f:7131]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath_pci
Kernel modules: ath_pci, ath5k
05:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8039 PCI-E Fast Ethernet Controller [11ab:4353] (rev 15)
Subsystem: Samsung Electronics Co Ltd Device [144d:c034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 220
Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at a000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.25-2-686 (SMP w/2 CPU cores)
Locale: LANG=ca_ES.UTF-8, LC_CTYPE=ca_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.92e tools for generating an
initramfs
ii module-init-tools 3.4-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.25-2-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared
libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686:
true
linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false
linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false
--- End Message ---