Bug#502434: linux-image-2.6.26-1-686 do not boot
I tried with the new kernel in Lenny and I've attached the output.
It does get further than before, but when it seems that X is going to
start, the screen keeps black and the keyboard leds starts turning on
and off all the time.
If I boot in single-user mode It boots OK.
Regards,
And thanks for your help.
--
David
Nov 24 09:22:53 n180 kernel: klogd 1.5.0#5, log source = /proc/kmsg started.
Nov 24 09:22:53 n180 kernel: [ 0.000000] Initializing cgroup subsys cpuset
Nov 24 09:22:53 n180 kernel: [ 0.000000] Initializing cgroup subsys cpu
Nov 24 09:22:53 n180 kernel: [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-10) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Nov 8 19:00:26 UTC 2008
Nov 24 09:22:53 n180 kernel: [ 0.000000] BIOS-provided physical RAM map:
Nov 24 09:22:53 n180 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Nov 24 09:22:53 n180 kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Nov 24 09:22:53 n180 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 24 09:22:53 n180 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
Nov 24 09:22:53 n180 kernel: [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
Nov 24 09:22:53 n180 kernel: [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
Nov 24 09:22:53 n180 kernel: [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
Nov 24 09:22:53 n180 kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Nov 24 09:22:53 n180 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Nov 24 09:22:53 n180 kernel: [ 0.000000] 126MB HIGHMEM available.
Nov 24 09:22:53 n180 kernel: [ 0.000000] 896MB LOWMEM available.
Nov 24 09:22:53 n180 kernel: [ 0.000000] found SMP MP-table at [c00f5ae0] 000f5ae0
Nov 24 09:22:53 n180 kernel: [ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used
Nov 24 09:22:53 n180 kernel: [ 0.000000] Zone PFN ranges:
Nov 24 09:22:53 n180 kernel: [ 0.000000] DMA 0 -> 4096
Nov 24 09:22:53 n180 kernel: [ 0.000000] Normal 4096 -> 229376
Nov 24 09:22:53 n180 kernel: [ 0.000000] HighMem 229376 -> 261856
Nov 24 09:22:53 n180 kernel: [ 0.000000] Movable zone start PFN for each node
Nov 24 09:22:53 n180 kernel: [ 0.000000] early_node_map[1] active PFN ranges
Nov 24 09:22:53 n180 kernel: [ 0.000000] 0: 0 -> 261856
Nov 24 09:22:53 n180 kernel: [ 0.000000] On node 0 totalpages: 261856
Nov 24 09:22:53 n180 kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Nov 24 09:22:53 n180 kernel: [ 0.000000] DMA zone: 0 pages reserved
Nov 24 09:22:53 n180 kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Nov 24 09:22:53 n180 kernel: [ 0.000000] Normal zone: 1760 pages used for memmap
Nov 24 09:22:53 n180 kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
Nov 24 09:22:53 n180 kernel: [ 0.000000] HighMem zone: 254 pages used for memmap
Nov 24 09:22:53 n180 kernel: [ 0.000000] HighMem zone: 32226 pages, LIFO batch:7
Nov 24 09:22:53 n180 kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Nov 24 09:22:53 n180 kernel: [ 0.000000] DMI 2.4 present.
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: RSDP 000F7570, 0024 (r2 AWARD )
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: XSDT 3FEE30C0, 0054 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: FACP 3FEEB080, 00F4 (r3 AWARD ASUSACPI 42302E31 AWRD 0)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: DSDT 3FEE3240, 7DD3 (r1 AWARD ASUSACPI 1000 MSFT 3000000)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: FACS 3FEE0000, 0040
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: HPET 3FEEB2C0, 0038 (r1 AWARD ASUSACPI 42302E31 AWRD 98)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: MCFG 3FEEB340, 003C (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: APIC 3FEEB1C0, 0090 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: SSDT 3FEEB3C0, 019E (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: SSDT 3FEEB850, 0275 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Nov 24 09:22:53 n180 kernel: [ 0.000000] IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
Nov 24 09:22:53 n180 kernel: [ 0.000000] IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: IRQ0 used by override.
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: IRQ2 used by override.
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: IRQ9 used by override.
Nov 24 09:22:53 n180 kernel: [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
Nov 24 09:22:53 n180 kernel: [ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfe800000
Nov 24 09:22:53 n180 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Nov 24 09:22:53 n180 kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
Nov 24 09:22:53 n180 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Nov 24 09:22:53 n180 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Nov 24 09:22:53 n180 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Nov 24 09:22:53 n180 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
Nov 24 09:22:53 n180 kernel: [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Nov 24 09:22:53 n180 kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
Nov 24 09:22:53 n180 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259810
Nov 24 09:22:53 n180 kernel: [ 0.000000] Kernel command line: root=/dev/hda2 ro quiet vga=0x314 splash
Nov 24 09:22:53 n180 kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Nov 24 09:22:53 n180 kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Nov 24 09:22:53 n180 kernel: [ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)
Nov 24 09:22:53 n180 kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Nov 24 09:22:53 n180 kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Nov 24 09:22:53 n180 kernel: [ 0.000000] Initializing CPU#0
Nov 24 09:22:53 n180 kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Nov 24 09:22:53 n180 kernel: [ 0.000000] Extended CMOS year: 2000
Nov 24 09:22:53 n180 kernel: [ 0.000000] Detected 3199.741 MHz processor.
Nov 24 09:22:53 n180 kernel: [ 0.004000] Console: colour dummy device 80x25
Nov 24 09:22:53 n180 kernel: [ 0.004000] console [tty0] enabled
Nov 24 09:22:53 n180 kernel: [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 24 09:22:53 n180 kernel: [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 24 09:22:53 n180 kernel: [ 0.004000] Memory: 1026872k/1047424k available (1768k kernel code, 19876k reserved, 752k data, 244k init, 129920k highmem)
Nov 24 09:22:53 n180 kernel: [ 0.004000] virtual kernel memory layout:
Nov 24 09:22:53 n180 kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
Nov 24 09:22:53 n180 kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Nov 24 09:22:53 n180 kernel: [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Nov 24 09:22:53 n180 kernel: [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Nov 24 09:22:53 n180 kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
Nov 24 09:22:53 n180 kernel: [ 0.004000] .data : 0xc02ba30b - 0xc0376620 ( 752 kB)
Nov 24 09:22:53 n180 kernel: [ 0.004000] .text : 0xc0100000 - 0xc02ba30b (1768 kB)
Nov 24 09:22:53 n180 kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Nov 24 09:22:53 n180 kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Nov 24 09:22:53 n180 kernel: [ 0.004000] hpet clockevent registered
Nov 24 09:22:53 n180 kernel: [ 0.083982] Calibrating delay using timer specific routine.. 6407.53 BogoMIPS (lpj=12815070)
Nov 24 09:22:53 n180 kernel: [ 0.084005] Security Framework initialized
Nov 24 09:22:53 n180 kernel: [ 0.084005] SELinux: Disabled at boot.
Nov 24 09:22:53 n180 kernel: [ 0.084005] Capability LSM initialized
Nov 24 09:22:53 n180 kernel: [ 0.084005] Mount-cache hash table entries: 512
Nov 24 09:22:53 n180 kernel: [ 0.084005] Initializing cgroup subsys ns
Nov 24 09:22:53 n180 kernel: [ 0.084005] Initializing cgroup subsys cpuacct
Nov 24 09:22:53 n180 kernel: [ 0.084005] Initializing cgroup subsys devices
Nov 24 09:22:53 n180 kernel: [ 0.084005] CPU: Trace cache: 12K uops, L1 D cache: 16K
Nov 24 09:22:53 n180 kernel: [ 0.084005] CPU: L2 cache: 2048K
Nov 24 09:22:53 n180 kernel: [ 0.084005] CPU: Physical Processor ID: 0
Nov 24 09:22:53 n180 kernel: [ 0.084005] Intel machine check architecture supported.
Nov 24 09:22:53 n180 kernel: [ 0.084005] Intel machine check reporting enabled on CPU#0.
Nov 24 09:22:53 n180 kernel: [ 0.084005] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
Nov 24 09:22:53 n180 kernel: [ 0.084005] CPU0: Thermal monitoring enabled
Nov 24 09:22:53 n180 kernel: [ 0.084005] using mwait in idle threads.
Nov 24 09:22:53 n180 kernel: [ 0.084005] Checking 'hlt' instruction... OK.
Nov 24 09:22:53 n180 kernel: [ 0.100006] ACPI: Core revision 20080321
Nov 24 09:22:53 n180 kernel: [ 0.119499] ENABLING IO-APIC IRQs
Nov 24 09:22:53 n180 kernel: [ 0.119798] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 24 09:22:53 n180 kernel: [ 0.159533] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 05
Nov 24 09:22:53 n180 kernel: [ 0.160010] Booting processor 1/1 ip 6000
Nov 24 09:22:53 n180 kernel: [ 0.168010] Initializing CPU#1
Nov 24 09:22:53 n180 kernel: [ 0.168010] Calibrating delay using timer specific routine.. 6399.26 BogoMIPS (lpj=12798526)
Nov 24 09:22:53 n180 kernel: [ 0.168010] CPU: Trace cache: 12K uops, L1 D cache: 16K
Nov 24 09:22:53 n180 kernel: [ 0.168010] CPU: L2 cache: 2048K
Nov 24 09:22:53 n180 kernel: [ 0.168010] CPU: Physical Processor ID: 0
Nov 24 09:22:53 n180 kernel: [ 0.168010] Intel machine check architecture supported.
Nov 24 09:22:53 n180 kernel: [ 0.168010] Intel machine check reporting enabled on CPU#1.
Nov 24 09:22:53 n180 kernel: [ 0.168010] CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
Nov 24 09:22:53 n180 kernel: [ 0.168010] CPU1: Thermal monitoring enabled
Nov 24 09:22:53 n180 kernel: [ 0.248015] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 05
Nov 24 09:22:53 n180 kernel: [ 0.248015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Nov 24 09:22:53 n180 kernel: [ 0.252015] Brought up 2 CPUs
Nov 24 09:22:53 n180 kernel: [ 0.252015] Total of 2 processors activated (12806.79 BogoMIPS).
Nov 24 09:22:53 n180 kernel: [ 0.252015] CPU0 attaching sched-domain:
Nov 24 09:22:53 n180 kernel: [ 0.252015] domain 0: span 0-1
Nov 24 09:22:53 n180 kernel: [ 0.252015] groups: 0 1
Nov 24 09:22:53 n180 kernel: [ 0.252015] domain 1: span 0-1
Nov 24 09:22:53 n180 kernel: [ 0.252015] groups: 0-1
Nov 24 09:22:53 n180 kernel: [ 0.252015] CPU1 attaching sched-domain:
Nov 24 09:22:53 n180 kernel: [ 0.252015] domain 0: span 0-1
Nov 24 09:22:53 n180 kernel: [ 0.252015] groups: 1 0
Nov 24 09:22:53 n180 kernel: [ 0.252015] domain 1: span 0-1
Nov 24 09:22:53 n180 kernel: [ 0.252015] groups: 0-1
Nov 24 09:22:53 n180 kernel: [ 0.252015] net_namespace: 660 bytes
Nov 24 09:22:53 n180 kernel: [ 0.252015] Booting paravirtualized kernel on bare hardware
Nov 24 09:22:53 n180 kernel: [ 0.252015] NET: Registered protocol family 16
Nov 24 09:22:53 n180 kernel: [ 0.252015] ACPI: bus type pci registered
Nov 24 09:22:53 n180 kernel: [ 0.252015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Nov 24 09:22:53 n180 kernel: [ 0.252015] PCI: MCFG area at e0000000 reserved in E820
Nov 24 09:22:53 n180 kernel: [ 0.252015] PCI: Using MMCONFIG for extended config space
Nov 24 09:22:53 n180 kernel: [ 0.252015] PCI: Using configuration type 1 for base access
Nov 24 09:22:53 n180 kernel: [ 0.252015] Setting up standard PCI resources
Nov 24 09:22:53 n180 kernel: [ 0.256016] ACPI: EC: Look up EC in DSDT
Nov 24 09:22:53 n180 kernel: [ 0.271864] ACPI: Interpreter enabled
Nov 24 09:22:53 n180 kernel: [ 0.271870] ACPI: (supports S0 S1 S3 S4 S5)
Nov 24 09:22:53 n180 kernel: [ 0.271894] ACPI: Using IOAPIC for interrupt routing
Nov 24 09:22:53 n180 kernel: [ 0.284017] ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 24 09:22:53 n180 kernel: [ 0.286155] PCI: Transparent bridge - 0000:00:13.1
Nov 24 09:22:53 n180 kernel: [ 0.286199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 24 09:22:53 n180 kernel: [ 0.286773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
Nov 24 09:22:53 n180 kernel: [ 0.286945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Nov 24 09:22:53 n180 kernel: [ 0.287118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
Nov 24 09:22:53 n180 kernel: [ 0.373018] ACPI: PCI Root Bridge [PCI1] (0000:80)
Nov 24 09:22:53 n180 kernel: [ 0.373161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
Nov 24 09:22:53 n180 kernel: [ 0.377018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
Nov 24 09:22:53 n180 kernel: [ 0.377018] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
Nov 24 09:22:53 n180 kernel: [ 0.377018] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
Nov 24 09:22:53 n180 kernel: [ 0.377018] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
Nov 24 09:22:53 n180 kernel: [ 0.377018] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12)
Nov 24 09:22:53 n180 kernel: [ 0.377018] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 24 09:22:53 n180 kernel: [ 0.377018] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Nov 24 09:22:53 n180 kernel: [ 0.377018] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
Nov 24 09:22:53 n180 kernel: [ 0.377018] Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 24 09:22:53 n180 kernel: [ 0.377018] pnp: PnP ACPI init
Nov 24 09:22:53 n180 kernel: [ 0.377018] ACPI: bus type pnp registered
Nov 24 09:22:53 n180 kernel: [ 0.385019] pnp: PnP ACPI: found 17 devices
Nov 24 09:22:53 n180 kernel: [ 0.385019] ACPI: ACPI bus type pnp unregistered
Nov 24 09:22:53 n180 kernel: [ 0.385019] PnPBIOS: Disabled by ACPI PNP
Nov 24 09:22:53 n180 kernel: [ 0.385019] PCI: Using ACPI for IRQ routing
Nov 24 09:22:53 n180 kernel: [ 0.389867] hpet0: at MMIO 0xfe800000, IRQs 2, 8, 0
Nov 24 09:22:53 n180 kernel: [ 0.389876] hpet0: 3 32-bit timers, 14318180 Hz
Nov 24 09:22:53 n180 kernel: [ 0.393223] ACPI: RTC can wake from S4
Nov 24 09:22:53 n180 kernel: [ 0.400169] system 00:01: ioport range 0x400-0x47f has been reserved
Nov 24 09:22:53 n180 kernel: [ 0.400174] system 00:01: ioport range 0x500-0x50f has been reserved
Nov 24 09:22:53 n180 kernel: [ 0.400186] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
Nov 24 09:22:53 n180 kernel: [ 0.400191] system 00:02: ioport range 0x290-0x29f has been reserved
Nov 24 09:22:53 n180 kernel: [ 0.400195] system 00:02: ioport range 0x800-0x805 has been reserved
Nov 24 09:22:53 n180 kernel: [ 0.400199] system 00:02: ioport range 0x880-0x88f has been reserved
Nov 24 09:22:53 n180 kernel: [ 0.400219] system 00:0d: iomem range 0x10000000-0x10000fff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400229] system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400245] system 00:10: iomem range 0xd3000-0xd3fff has been reserved
Nov 24 09:22:53 n180 kernel: [ 0.400248] system 00:10: iomem range 0xf0000-0xf7fff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400251] system 00:10: iomem range 0xf8000-0xfbfff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400254] system 00:10: iomem range 0xfc000-0xfffff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400258] system 00:10: iomem range 0xfe800000-0xfe8000ff has been reserved
Nov 24 09:22:53 n180 kernel: [ 0.400261] system 00:10: iomem range 0x3fee0000-0x3fefffff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400264] system 00:10: iomem range 0xffff0000-0xffffffff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400268] system 00:10: iomem range 0x0-0x9ffff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400271] system 00:10: iomem range 0x100000-0x3fedffff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400274] system 00:10: iomem range 0xfec00000-0xfec00fff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400278] system 00:10: iomem range 0xfee00000-0xfee00fff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.400281] system 00:10: iomem range 0xfff80000-0xfffeffff could not be reserved
Nov 24 09:22:53 n180 kernel: [ 0.431316] PCI: Bridge: 0000:00:01.0
Nov 24 09:22:53 n180 kernel: [ 0.431316] IO window: disabled.
Nov 24 09:22:53 n180 kernel: [ 0.431316] MEM window: disabled.
Nov 24 09:22:53 n180 kernel: [ 0.431316] PREFETCH window: disabled.
Nov 24 09:22:53 n180 kernel: [ 0.431316] PCI: Bridge: 0000:00:02.0
Nov 24 09:22:53 n180 kernel: [ 0.431316] IO window: disabled.
Nov 24 09:22:53 n180 kernel: [ 0.431316] MEM window: 0xdc000000-0xdeffffff
Nov 24 09:22:53 n180 kernel: [ 0.431316] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
Nov 24 09:22:53 n180 kernel: [ 0.431316] PCI: Bridge: 0000:00:03.0
Nov 24 09:22:53 n180 kernel: [ 0.431316] IO window: b000-cfff
Nov 24 09:22:53 n180 kernel: [ 0.431316] MEM window: 0xdfe00000-0xdfefffff
Nov 24 09:22:53 n180 kernel: [ 0.431316] PREFETCH window: disabled.
Nov 24 09:22:53 n180 kernel: [ 0.431316] PCI: Bridge: 0000:00:13.1
Nov 24 09:22:53 n180 kernel: [ 0.431316] IO window: a000-afff
Nov 24 09:22:53 n180 kernel: [ 0.431316] MEM window: 0xdfd00000-0xdfdfffff
Nov 24 09:22:53 n180 kernel: [ 0.431316] PREFETCH window: 0x0000000040000000-0x00000000400fffff
Nov 24 09:22:53 n180 kernel: [ 0.431316] PCI: Setting latency timer of device 0000:00:01.0 to 64
Nov 24 09:22:53 n180 kernel: [ 0.431316] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
Nov 24 09:22:53 n180 kernel: [ 0.431316] PCI: Setting latency timer of device 0000:00:02.0 to 64
Nov 24 09:22:53 n180 kernel: [ 0.431316] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
Nov 24 09:22:53 n180 kernel: [ 0.431316] PCI: Setting latency timer of device 0000:00:03.0 to 64
Nov 24 09:22:53 n180 kernel: [ 0.431316] PCI: Setting latency timer of device 0000:00:13.1 to 64
Nov 24 09:22:53 n180 kernel: [ 0.431316] NET: Registered protocol family 2
Nov 24 09:22:53 n180 kernel: [ 0.444376] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 24 09:22:53 n180 kernel: [ 0.444703] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 24 09:22:53 n180 kernel: [ 0.446860] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Nov 24 09:22:53 n180 kernel: [ 0.447140] TCP: Hash tables configured (established 131072 bind 65536)
Nov 24 09:22:53 n180 kernel: [ 0.447143] TCP reno registered
Nov 24 09:22:53 n180 kernel: [ 0.454007] NET: Registered protocol family 1
Nov 24 09:22:53 n180 kernel: [ 0.454143] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
Nov 24 09:22:53 n180 kernel: [ 0.508941] Switched to high resolution mode on CPU 0
Nov 24 09:22:53 n180 kernel: [ 0.724900] it is
Nov 24 09:22:53 n180 kernel: [ 1.024902] Freeing initrd memory: 7463k freed
Nov 24 09:22:53 n180 kernel: [ 1.024902] audit: initializing netlink socket (disabled)
Nov 24 09:22:53 n180 kernel: [ 1.024902] type=2000 audit(1227518554.016:1): initialized
Nov 24 09:22:53 n180 kernel: [ 1.024903] highmem bounce pool size: 64 pages
Nov 24 09:22:53 n180 kernel: [ 1.024903] Total HugeTLB memory allocated, 0
Nov 24 09:22:53 n180 kernel: [ 1.024903] VFS: Disk quotas dquot_6.5.1
Nov 24 09:22:53 n180 kernel: [ 1.024903] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 24 09:22:53 n180 kernel: [ 1.024903] msgmni has been set to 1766
Nov 24 09:22:53 n180 kernel: [ 1.024903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Nov 24 09:22:53 n180 kernel: [ 1.024903] io scheduler noop registered
Nov 24 09:22:53 n180 kernel: [ 1.024903] io scheduler anticipatory registered
Nov 24 09:22:53 n180 kernel: [ 1.024903] io scheduler deadline registered
Nov 24 09:22:53 n180 kernel: [ 1.024903] io scheduler cfq registered (default)
Nov 24 09:22:53 n180 kernel: [ 1.024910] PCI: VIA PCI bridge detected.Disabling DAC.
Nov 24 09:22:53 n180 kernel: [ 1.025028] pci 0000:02:00.0: Boot video device
Nov 24 09:22:53 n180 kernel: [ 1.028901] PCI: Setting latency timer of device 0000:00:02.0 to 64
Nov 24 09:22:53 n180 kernel: [ 1.028901] assign_interrupt_mode Found MSI capability
Nov 24 09:22:53 n180 kernel: [ 1.028901] Allocate Port Service[0000:00:02.0:pcie00]
Nov 24 09:22:53 n180 kernel: [ 1.028901] Allocate Port Service[0000:00:02.0:pcie01]
Nov 24 09:22:53 n180 kernel: [ 1.028908] Allocate Port Service[0000:00:02.0:pcie02]
Nov 24 09:22:53 n180 kernel: [ 1.028908] Allocate Port Service[0000:00:02.0:pcie03]
Nov 24 09:22:53 n180 kernel: [ 1.028908] PCI: Setting latency timer of device 0000:00:03.0 to 64
Nov 24 09:22:53 n180 kernel: [ 1.028908] assign_interrupt_mode Found MSI capability
Nov 24 09:22:53 n180 kernel: [ 1.028908] Allocate Port Service[0000:00:03.0:pcie00]
Nov 24 09:22:53 n180 kernel: [ 1.028908] Allocate Port Service[0000:00:03.0:pcie01]
Nov 24 09:22:53 n180 kernel: [ 1.028908] Allocate Port Service[0000:00:03.0:pcie02]
Nov 24 09:22:53 n180 kernel: [ 1.028908] Allocate Port Service[0000:00:03.0:pcie03]
Nov 24 09:22:53 n180 kernel: [ 1.032901] Load service driver aer on pcie device 0000:00:02.0:pcie01
Nov 24 09:22:53 n180 kernel: [ 1.036900] Load service driver aer on pcie device 0000:00:03.0:pcie01
Nov 24 09:22:53 n180 kernel: [ 1.036900] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 1875k, total 131072k
Nov 24 09:22:53 n180 kernel: [ 1.036900] vesafb: mode is 800x600x16, linelength=1600, pages=2
Nov 24 09:22:53 n180 kernel: [ 1.036900] vesafb: protected mode interface info at c000:d1f0
Nov 24 09:22:53 n180 kernel: [ 1.036900] vesafb: pmi: set display start = c00cd226, set palette = c00cd290
Nov 24 09:22:53 n180 kernel: [ 1.036900] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Nov 24 09:22:53 n180 kernel: [ 1.036900] vesafb: scrolling: redraw
Nov 24 09:22:53 n180 kernel: [ 1.036900] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Nov 24 09:22:53 n180 kernel: [ 1.052901] Console: switching to colour frame buffer device 100x37
Nov 24 09:22:53 n180 kernel: [ 1.068900] fb0: VESA VGA frame buffer device
Nov 24 09:22:53 n180 kernel: [ 1.068900] isapnp: Scanning for PnP cards...
Nov 24 09:22:53 n180 kernel: [ 1.376899] isapnp: No Plug & Play device found
Nov 24 09:22:53 n180 kernel: [ 1.380900] hpet_resources: 0xfe800000 is busy
Nov 24 09:22:53 n180 kernel: [ 1.380900] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 24 09:22:53 n180 kernel: [ 1.380900] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 24 09:22:53 n180 kernel: [ 1.380980] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 24 09:22:53 n180 kernel: [ 1.384900] brd: module loaded
Nov 24 09:22:53 n180 kernel: [ 1.384900] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Nov 24 09:22:53 n180 kernel: [ 1.387569] serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 24 09:22:53 n180 kernel: [ 1.387577] serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 24 09:22:53 n180 kernel: [ 1.388908] mice: PS/2 mouse device common for all mice
Nov 24 09:22:53 n180 kernel: [ 1.388908] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Nov 24 09:22:53 n180 kernel: [ 1.388908] rtc0: alarms up to one year, y3k
Nov 24 09:22:53 n180 kernel: [ 1.388908] cpuidle: using governor ladder
Nov 24 09:22:53 n180 kernel: [ 1.388908] cpuidle: using governor menu
Nov 24 09:22:53 n180 kernel: [ 1.388908] No iBFT detected.
Nov 24 09:22:53 n180 kernel: [ 1.388908] TCP cubic registered
Nov 24 09:22:53 n180 kernel: [ 1.388908] NET: Registered protocol family 17
Nov 24 09:22:53 n180 kernel: [ 1.388908] Using IPI No-Shortcut mode
Nov 24 09:22:53 n180 kernel: [ 1.388908] registered taskstats version 1
Nov 24 09:22:53 n180 kernel: [ 1.388908] rtc_cmos 00:05: setting system clock to 2008-11-24 09:22:35 UTC (1227518555)
Nov 24 09:22:53 n180 kernel: [ 1.388908] Freeing unused kernel memory: 244k freed
Nov 24 09:22:53 n180 kernel: [ 1.416923] input: AT Translated Set 2 keyboard as /class/input/input0
Nov 24 09:22:53 n180 kernel: [ 1.603470] ACPI: PNP0C0B:00 is registered as cooling_device0
Nov 24 09:22:53 n180 kernel: [ 1.603470] ACPI: Fan [FAN] (on)
Nov 24 09:22:53 n180 kernel: [ 1.608505] ACPI: ACPI0007:00 is registered as cooling_device1
Nov 24 09:22:53 n180 kernel: [ 1.608505] ACPI: SSDT 3FEEB7C0, 0087 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
Nov 24 09:22:53 n180 kernel: [ 1.608505] ACPI: ACPI0007:01 is registered as cooling_device2
Nov 24 09:22:53 n180 kernel: [ 1.612504] ACPI: LNXTHERM:01 is registered as thermal_zone0
Nov 24 09:22:53 n180 kernel: [ 1.612504] ACPI: Thermal Zone [THRM] (40 C)
Nov 24 09:22:53 n180 kernel: [ 2.268487] No dock devices found.
Nov 24 09:22:53 n180 kernel: [ 2.291862] SCSI subsystem initialized
Nov 24 09:22:53 n180 kernel: [ 2.331377] libata version 3.00 loaded.
Nov 24 09:22:53 n180 kernel: [ 2.331377] Uniform Multi-Platform E-IDE driver
Nov 24 09:22:53 n180 kernel: [ 2.331377] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 24 09:22:53 n180 kernel: [ 2.352721] ahci 0000:03:00.0: version 3.0
Nov 24 09:22:53 n180 kernel: [ 2.352785] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 28 (level, low) -> IRQ 28
Nov 24 09:22:53 n180 kernel: [ 2.355377] PCI: Disallowing DAC for device 0000:03:00.0
Nov 24 09:22:53 n180 kernel: [ 2.378729] usbcore: registered new interface driver usbfs
Nov 24 09:22:53 n180 kernel: [ 2.378729] usbcore: registered new interface driver hub
Nov 24 09:22:53 n180 kernel: [ 2.409430] usbcore: registered new device driver usb
Nov 24 09:22:53 n180 kernel: [ 2.412652] USB Universal Host Controller Interface driver v3.0
Nov 24 09:22:53 n180 kernel: [ 2.494725] Floppy drive(s): fd0 is 1.44M
Nov 24 09:22:53 n180 kernel: [ 2.515431] FDC 0 is a post-1991 82077
Nov 24 09:22:53 n180 kernel: [ 3.019137] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Nov 24 09:22:53 n180 kernel: [ 3.019137] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Nov 24 09:22:53 n180 kernel: [ 3.019137] PCI: Setting latency timer of device 0000:03:00.0 to 64
Nov 24 09:22:53 n180 kernel: [ 3.366198] scsi0 : ahci
Nov 24 09:22:53 n180 kernel: [ 3.366674] scsi1 : ahci
Nov 24 09:22:53 n180 kernel: [ 3.366674] ata1: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe100 irq 28
Nov 24 09:22:53 n180 kernel: [ 3.366674] ata2: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe180 irq 28
Nov 24 09:22:53 n180 kernel: [ 4.043157] ata1: SATA link down (SStatus 0 SControl 300)
Nov 24 09:22:53 n180 kernel: [ 4.379160] ata2: SATA link down (SStatus 0 SControl 300)
Nov 24 09:22:53 n180 kernel: [ 4.563081] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
Nov 24 09:22:53 n180 kernel: [ 4.563081] uhci_hcd 0000:00:10.0: UHCI Host Controller
Nov 24 09:22:53 n180 kernel: [ 4.563081] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Nov 24 09:22:53 n180 kernel: [ 4.563081] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e000
Nov 24 09:22:53 n180 kernel: [ 4.563081] usb usb1: configuration #1 chosen from 1 choice
Nov 24 09:22:53 n180 kernel: [ 4.563081] hub 1-0:1.0: USB hub found
Nov 24 09:22:53 n180 kernel: [ 4.563081] hub 1-0:1.0: 2 ports detected
Nov 24 09:22:53 n180 kernel: [ 4.670578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Nov 24 09:22:53 n180 kernel: [ 4.670578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 24 09:22:53 n180 kernel: [ 4.670578] usb usb1: Product: UHCI Host Controller
Nov 24 09:22:53 n180 kernel: [ 4.670578] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Nov 24 09:22:53 n180 kernel: [ 4.670578] usb usb1: SerialNumber: 0000:00:10.0
Nov 24 09:22:53 n180 kernel: [ 4.670578] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22
Nov 24 09:22:53 n180 kernel: [ 4.670578] uhci_hcd 0000:00:10.1: UHCI Host Controller
Nov 24 09:22:53 n180 kernel: [ 4.670578] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Nov 24 09:22:53 n180 kernel: [ 4.670578] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000dc00
Nov 24 09:22:53 n180 kernel: [ 4.670578] usb usb2: configuration #1 chosen from 1 choice
Nov 24 09:22:53 n180 kernel: [ 4.670578] hub 2-0:1.0: USB hub found
Nov 24 09:22:53 n180 kernel: [ 4.670584] hub 2-0:1.0: 2 ports detected
Nov 24 09:22:53 n180 kernel: [ 4.806702] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Nov 24 09:22:53 n180 kernel: [ 4.806706] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 24 09:22:53 n180 kernel: [ 4.806710] usb usb2: Product: UHCI Host Controller
Nov 24 09:22:53 n180 kernel: [ 4.806712] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Nov 24 09:22:53 n180 kernel: [ 4.806715] usb usb2: SerialNumber: 0000:00:10.1
Nov 24 09:22:53 n180 kernel: [ 4.810069] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
Nov 24 09:22:53 n180 kernel: [ 4.810069] uhci_hcd 0000:00:10.2: UHCI Host Controller
Nov 24 09:22:53 n180 kernel: [ 4.810069] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Nov 24 09:22:53 n180 kernel: [ 4.810069] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
Nov 24 09:22:53 n180 kernel: [ 4.810069] usb usb3: configuration #1 chosen from 1 choice
Nov 24 09:22:53 n180 kernel: [ 4.810069] hub 3-0:1.0: USB hub found
Nov 24 09:22:53 n180 kernel: [ 4.810069] hub 3-0:1.0: 2 ports detected
Nov 24 09:22:53 n180 kernel: [ 4.925687] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Nov 24 09:22:53 n180 kernel: [ 4.925691] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 24 09:22:53 n180 kernel: [ 4.925694] usb usb3: Product: UHCI Host Controller
Nov 24 09:22:53 n180 kernel: [ 4.925697] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Nov 24 09:22:53 n180 kernel: [ 4.925699] usb usb3: SerialNumber: 0000:00:10.2
Nov 24 09:22:53 n180 kernel: [ 4.929561] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
Nov 24 09:22:53 n180 kernel: [ 4.929561] uhci_hcd 0000:00:10.3: UHCI Host Controller
Nov 24 09:22:53 n180 kernel: [ 4.929561] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Nov 24 09:22:53 n180 kernel: [ 4.929561] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d400
Nov 24 09:22:53 n180 kernel: [ 4.929561] usb usb4: configuration #1 chosen from 1 choice
Nov 24 09:22:53 n180 kernel: [ 4.929561] hub 4-0:1.0: USB hub found
Nov 24 09:22:53 n180 kernel: [ 4.929561] hub 4-0:1.0: 2 ports detected
Nov 24 09:22:53 n180 kernel: [ 5.030361] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Nov 24 09:22:53 n180 kernel: [ 5.030365] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 24 09:22:53 n180 kernel: [ 5.030368] usb usb4: Product: UHCI Host Controller
Nov 24 09:22:53 n180 kernel: [ 5.030370] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Nov 24 09:22:53 n180 kernel: [ 5.030372] usb usb4: SerialNumber: 0000:00:10.3
Nov 24 09:22:53 n180 kernel: [ 5.034235] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
Nov 24 09:22:53 n180 kernel: [ 5.034235] ehci_hcd 0000:00:10.4: EHCI Host Controller
Nov 24 09:22:53 n180 kernel: [ 5.034235] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Nov 24 09:22:53 n180 kernel: [ 5.034235] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffff000
Nov 24 09:22:53 n180 kernel: [ 5.082245] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 24 09:22:53 n180 kernel: [ 5.082336] usb usb5: configuration #1 chosen from 1 choice
Nov 24 09:22:53 n180 kernel: [ 5.082370] hub 5-0:1.0: USB hub found
Nov 24 09:22:53 n180 kernel: [ 5.082380] hub 5-0:1.0: 8 ports detected
Nov 24 09:22:53 n180 kernel: [ 5.182368] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Nov 24 09:22:53 n180 kernel: [ 5.182372] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 24 09:22:53 n180 kernel: [ 5.182375] usb usb5: Product: EHCI Host Controller
Nov 24 09:22:53 n180 kernel: [ 5.182378] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Nov 24 09:22:53 n180 kernel: [ 5.182380] usb usb5: SerialNumber: 0000:00:10.4
Nov 24 09:22:53 n180 kernel: [ 5.186242] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
Nov 24 09:22:53 n180 kernel: [ 5.186242] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 20 (level, low) -> IRQ 20
Nov 24 09:22:53 n180 kernel: [ 5.186242] eth0: RTL8169sc/8110sc at 0xf8826000, 00:1a:92:31:86:f1, XID 18000000 IRQ 20
Nov 24 09:22:53 n180 kernel: [ 5.186242] VP_IDE: IDE controller (0x1106:0x0571 rev 0x07) at PCI slot 0000:00:0f.1
Nov 24 09:22:53 n180 kernel: [ 5.186242] VP_IDE: not 100% native mode: will probe irqs later
Nov 24 09:22:53 n180 kernel: [ 5.186242] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Nov 24 09:22:53 n180 kernel: [ 5.186242] ide0: BM-DMA at 0xe400-0xe407
Nov 24 09:22:53 n180 kernel: [ 5.186242] ide1: BM-DMA at 0xe408-0xe40f
Nov 24 09:22:53 n180 kernel: [ 5.186242] Probing IDE interface ide0...
Nov 24 09:22:53 n180 kernel: [ 5.758701] hda: WDC WD800BB-22JHC0, ATA DISK drive
Nov 24 09:22:53 n180 kernel: [ 6.434259] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Nov 24 09:22:53 n180 kernel: [ 6.434259] hda: UDMA/100 mode selected
Nov 24 09:22:53 n180 kernel: [ 6.434259] Probing IDE interface ide1...
Nov 24 09:22:53 n180 kernel: [ 7.626380] hdc: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive
Nov 24 09:22:53 n180 kernel: [ 8.353735] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Nov 24 09:22:53 n180 kernel: [ 8.357761] hdc: UDMA/66 mode selected
Nov 24 09:22:53 n180 kernel: [ 8.357761] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 24 09:22:53 n180 kernel: [ 8.641755] ide1 at 0x170-0x177,0x376 on irq 15
Nov 24 09:22:53 n180 kernel: [ 8.641755] JMB: IDE controller (0x197b:0x2363 rev 0x02) at PCI slot 0000:03:00.1
Nov 24 09:22:53 n180 kernel: [ 8.641755] JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001)
Nov 24 09:22:53 n180 kernel: [ 8.641755] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 29 (level, low) -> IRQ 29
Nov 24 09:22:53 n180 kernel: [ 8.641755] JMB: 100% native mode on irq 29
Nov 24 09:22:53 n180 kernel: [ 8.641755] PCI: Setting latency timer of device 0000:03:00.1 to 64
Nov 24 09:22:53 n180 kernel: [ 8.641755] ide2: BM-DMA at 0xbc00-0xbc07
Nov 24 09:22:53 n180 kernel: [ 8.641755] ide3: BM-DMA at 0xbc08-0xbc0f
Nov 24 09:22:53 n180 kernel: [ 8.641755] Probing IDE interface ide2...
Nov 24 09:22:53 n180 kernel: [ 9.205307] Probing IDE interface ide3...
Nov 24 09:22:53 n180 kernel: [ 10.127234] ide2 at 0xcc00-0xcc07,0xc802 on irq 29
Nov 24 09:22:53 n180 kernel: [ 10.127268] ide3 at 0xc400-0xc407,0xc002 on irq 29
Nov 24 09:22:53 n180 kernel: [ 10.466675] sata_via 0000:00:0f.0: version 2.3
Nov 24 09:22:53 n180 kernel: [ 10.466675] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
Nov 24 09:22:53 n180 kernel: [ 10.466675] sata_via 0000:00:0f.0: routed to hard irq line 11
Nov 24 09:22:53 n180 kernel: [ 10.466712] scsi2 : sata_via
Nov 24 09:22:53 n180 kernel: [ 10.466712] scsi3 : sata_via
Nov 24 09:22:53 n180 kernel: [ 10.470673] ata3: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
Nov 24 09:22:53 n180 kernel: [ 10.470673] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
Nov 24 09:22:53 n180 kernel: [ 10.486438] hda: max request size: 128KiB
Nov 24 09:22:53 n180 kernel: [ 10.486438] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
Nov 24 09:22:53 n180 kernel: [ 10.486438] hda: cache flushes supported
Nov 24 09:22:53 n180 kernel: [ 10.486438] hda: hda1 hda2 hda3 < hda5 >
Nov 24 09:22:53 n180 kernel: [ 10.518441] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Nov 24 09:22:53 n180 kernel: [ 10.518441] Uniform CD-ROM driver Revision: 3.20
Nov 24 09:22:53 n180 kernel: [ 10.680849] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Nov 24 09:22:53 n180 kernel: [ 10.889334] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Nov 24 09:22:53 n180 kernel: [ 10.977245] kjournald starting. Commit interval 5 seconds
Nov 24 09:22:53 n180 kernel: [ 10.977245] EXT3-fs: mounted filesystem with ordered data mode.
Nov 24 09:22:53 n180 kernel: [ 14.099081] udevd version 125 started
Nov 24 09:22:53 n180 kernel: [ 15.107639] Linux agpgart interface v0.103
Nov 24 09:22:53 n180 kernel: [ 15.168392] agpgart: Detected VIA P4M890 chipset
Nov 24 09:22:53 n180 kernel: [ 15.176875] agpgart: AGP aperture is 128M @ 0xd0000000
Nov 24 09:22:53 n180 kernel: [ 15.195928] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 24 09:22:53 n180 kernel: [ 15.234268] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 24 09:22:53 n180 kernel: [ 15.533129] input: Power Button (FF) as /class/input/input1
Nov 24 09:22:53 n180 kernel: [ 15.571824] ACPI: Power Button (FF) [PWRF]
Nov 24 09:22:53 n180 kernel: [ 15.571932] input: Power Button (CM) as /class/input/input2
Nov 24 09:22:53 n180 kernel: [ 15.612237] ACPI: Power Button (CM) [PWRB]
Nov 24 09:22:53 n180 kernel: [ 15.612342] input: Sleep Button (CM) as /class/input/input3
Nov 24 09:22:53 n180 kernel: [ 15.655852] ACPI: Sleep Button (CM) [SLPB]
Nov 24 09:22:53 n180 kernel: [ 16.428804] input: PC Speaker as /class/input/input4
Nov 24 09:22:53 n180 kernel: [ 16.901176] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
Nov 24 09:22:53 n180 kernel: [ 16.953343] parport_pc 00:0a: reported by Plug and Play ACPI
Nov 24 09:22:53 n180 kernel: [ 16.953402] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Nov 24 09:22:53 n180 kernel: [ 17.300997] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 17
Nov 24 09:22:53 n180 kernel: [ 17.301032] PCI: Setting latency timer of device 0000:80:01.0 to 64
Nov 24 09:22:53 n180 kernel: [ 17.301038] PCI: Disallowing DAC for device 0000:80:01.0
Nov 24 09:22:53 n180 kernel: [ 17.965307] Adding 1253028k swap on /dev/hda5. Priority:-1 extents:1 across:1253028k
Nov 24 09:22:53 n180 kernel: [ 18.424595] EXT3 FS on hda2, internal journal
Nov 24 09:22:53 n180 kernel: [ 18.686589] loop: module loaded
Nov 24 09:22:53 n180 kernel: [ 18.995658] fuse init (API version 7.9)
Nov 24 09:22:53 n180 kernel: [ 21.727668] r8169: eth0: link up
Nov 24 09:23:03 n180 kernel: [ 33.246881] NET: Registered protocol family 10
Nov 24 09:23:03 n180 kernel: [ 33.247878] lo: Disabled Privacy Extensions
Nov 24 09:23:06 n180 kernel: [ 35.817786] lp0: using parport0 (interrupt-driven).
Nov 24 09:23:06 n180 kernel: [ 35.838801] ppdev: user-space parallel port driver
Nov 24 09:23:09 n180 kernel: [ 39.679869] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
Nov 24 09:23:19 n180 kernel: [ 49.480734] nvidia: module license 'NVIDIA' taints kernel.
Nov 24 09:23:19 n180 kernel: [ 49.737547] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
Nov 24 09:23:19 n180 kernel: [ 49.737547] PCI: Setting latency timer of device 0000:02:00.0 to 64
Nov 24 09:23:19 n180 kernel: [ 49.737547] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17 PDT 2008
Reply to: