Bug#504655: debian-installer: Kernel panic when velocity driver started
severity 504655 grave
thanks
Hi,
On Thu, Nov 06, 2008 at 01:03:10AM +0100, Frans Pop wrote:
> As this is a kernel problem, I'm reassigning this to the kernel team.
In the meanwhile the system is installed and I can confirm that the
bug also happens on the installed system and not only during
installation, so thanks for already having reassigned the bug. :-)
Raising the severity to "grave" since
a) disabling ACPI permanently on a board with focus on low power
consumption is not really "usable" (would be ok during installation
only, that's why I reported it initially only as "severity: important"),
and
b) it's a regression since it worked before with 2.6.24.
Here are the usual bug report details from the installed and (with
pci=noacpi) running system:
The mainboard is a VIA EPIA SN18000G,
http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=550
-- Package-specific info:
** Version:
Linux version 2.6.26-1-486 (Debian 2.6.26-8) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 Thu Oct 9 14:22:52 UTC 2008
** Command line:
root=/dev/mapper/vg0-root ro pci=noacpi
** Not tainted
** Kernel log:
[ 8.993192] ata1: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 219
[ 8.993245] ata2: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 219
[ 8.993297] ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 219
[ 8.993349] ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 219
[ 9.312025] ata1: SATA link down (SStatus 0 SControl 300)
[ 9.632039] ata2: SATA link down (SStatus 0 SControl 300)
[ 9.882672] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 9.902500] usbcore: registered new interface driver usbfs
[ 9.902597] usbcore: registered new interface driver hub
[ 9.902700] usbcore: registered new device driver usb
[ 9.925530] USB Universal Host Controller Interface driver v3.0
[ 9.952034] ata3: SATA link down (SStatus 0 SControl 300)
[ 10.145020] input: PC Speaker as /class/input/input4
[ 10.272039] ata4: SATA link down (SStatus 0 SControl 300)
[ 10.272927] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 10.273378] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 10.273459] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000cc00
[ 10.273636] usb usb1: configuration #1 chosen from 1 choice
[ 10.273721] hub 1-0:1.0: USB hub found
[ 10.273771] hub 1-0:1.0: 2 ports detected
[ 10.376216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.376270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.376321] usb usb1: Product: UHCI Host Controller
[ 10.376364] usb usb1: Manufacturer: Linux 2.6.26-1-486 uhci_hcd
[ 10.376408] usb usb1: SerialNumber: 0000:00:10.0
[ 10.376519] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 10.376593] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 10.376669] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d000
[ 10.376837] usb usb2: configuration #1 chosen from 1 choice
[ 10.376922] hub 2-0:1.0: USB hub found
[ 10.376975] hub 2-0:1.0: 2 ports detected
[ 10.485524] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.485579] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.485630] usb usb2: Product: UHCI Host Controller
[ 10.485673] usb usb2: Manufacturer: Linux 2.6.26-1-486 uhci_hcd
[ 10.485718] usb usb2: SerialNumber: 0000:00:10.1
[ 10.485829] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 10.485904] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 10.485979] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d080
[ 10.486151] usb usb3: configuration #1 chosen from 1 choice
[ 10.486234] hub 3-0:1.0: USB hub found
[ 10.486283] hub 3-0:1.0: 2 ports detected
[ 10.588178] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.588233] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.589018] usb usb3: Product: UHCI Host Controller
[ 10.589061] usb usb3: Manufacturer: Linux 2.6.26-1-486 uhci_hcd
[ 10.589105] usb usb3: SerialNumber: 0000:00:10.2
[ 10.589231] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 10.589307] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 10.589396] ehci_hcd 0000:00:10.4: debug port 1
[ 10.589447] ehci_hcd 0000:00:10.4: irq 22, io mem 0xfcfff800
[ 10.600023] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 10.600202] usb usb4: configuration #1 chosen from 1 choice
[ 10.600287] hub 4-0:1.0: USB hub found
[ 10.600339] hub 4-0:1.0: 6 ports detected
[ 10.643642] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.704171] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.704224] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.704275] usb usb4: Product: EHCI Host Controller
[ 10.704318] usb usb4: Manufacturer: Linux 2.6.26-1-486 ehci_hcd
[ 10.704362] usb usb4: SerialNumber: 0000:00:10.4
[ 10.708791] eth1: VIA Rhine II at 0x1c800, 00:40:63:f7:b6:39, IRQ 23.
[ 10.709539] eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 10.771393] PCI: Setting latency timer of device 0000:80:01.0 to 64
[ 11.924745] input: PS2++ Logitech Wheel Mouse as /class/input/input5
[ 14.376481] EXT3 FS on dm-2, internal journal
[ 14.612002] loop: module loaded
[ 16.345735] kjournald starting. Commit interval 5 seconds
[ 16.345735] EXT3 FS on hda1, internal journal
[ 16.345735] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.389797] kjournald starting. Commit interval 5 seconds
[ 16.389797] EXT3 FS on dm-4, internal journal
[ 16.389797] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.427751] kjournald starting. Commit interval 5 seconds
[ 16.427751] EXT3 FS on dm-0, internal journal
[ 16.428052] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.449313] kjournald starting. Commit interval 5 seconds
[ 16.449313] EXT3 FS on dm-1, internal journal
[ 16.449313] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.514619] Adding 7811064k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:7811064k
[ 17.141582] Velocity is AUTO mode
[ 18.587375] NET: Registered protocol family 10
[ 18.588079] lo: Disabled Privacy Extensions
[ 18.588850] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.672536] eth0: Link auto-negotiation speed 100M bps full duplex
[ 18.673684] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.904012] eth0: no IPv6 routers present
[ 1274.858024] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[12660.406989] fuse init (API version 7.9)
[12662.528863] Bluetooth: Core ver 2.11
[12662.530971] NET: Registered protocol family 31
[12662.530994] Bluetooth: HCI device and connection manager initialized
[12662.531012] Bluetooth: HCI socket layer initialized
[12662.639908] Bluetooth: L2CAP ver 2.9
[12662.639931] Bluetooth: L2CAP socket layer initialized
[12662.661509] Bluetooth: RFCOMM socket layer initialized
[12662.661550] Bluetooth: RFCOMM TTY layer initialized
[12662.661563] Bluetooth: RFCOMM ver 1.8
[12724.800297] lp: driver loaded but no devices found
[12724.847068] ppdev: user-space parallel port driver
** Loaded modules:
Module Size Used by
ppdev 6404 0
parport_pc 22436 0
lp 7972 0
parport 30408 3 ppdev,parport_pc,lp
rfcomm 27028 0
l2cap 16004 5 rfcomm
bluetooth 42884 4 rfcomm,l2cap
fuse 41116 1
snd_pcm_oss 32544 0
snd_mixer_oss 12288 1 snd_pcm_oss
snd_seq_dummy 2692 0
snd_seq_oss 24832 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 40784 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 6412 3 snd_seq_dummy,snd_seq_oss,snd_seq
ipv6 225172 26
video 16272 0
output 2816 1 video
ac 4228 0
battery 10116 0
loop 12428 0
serio_raw 4740 0
psmouse 32016 0
snd_hda_intel 323992 0
snd_pcm 60808 2 snd_pcm_oss,snd_hda_intel
snd_timer 17668 2 snd_seq,snd_pcm
snd 45092 8 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer
soundcore 6112 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
pcspkr 2304 0
ehci_hcd 28300 0
i2c_viapro 6804 0
uhci_hcd 18448 0
i2c_core 19728 1 i2c_viapro
via_rhine 18184 0
mii 4864 1 via_rhine
usbcore 117616 3 ehci_hcd,uhci_hcd
ahci 23176 0
button 6032 0
via_velocity 25988 0
crc_ccitt 2048 1 via_velocity
shpchp 25496 0
pci_hotplug 23204 1 shpchp
via_agp 7680 1
agpgart 28336 1 via_agp
evdev 7808 4
ext3 103432 5
jbd 35092 1 ext3
mbcache 6656 1 ext3
dm_mirror 14720 0
dm_log 8192 1 dm_mirror
dm_snapshot 14240 0
dm_mod 45384 14 dm_mirror,dm_log,dm_snapshot
thermal 15132 0
processor 28080 1 thermal
fan 4100 0
thermal_sys 10784 4 video,thermal,processor,fan
ide_disk 10496 3
via82cxxx 6916 0 [permanent]
ide_pci_generic 3844 0 [permanent]
ide_core 95144 3 ide_disk,via82cxxx,ide_pci_generic
ata_generic 4612 0
libata 141088 2 ahci,ata_generic
scsi_mod 129804 1 libata
dock 8076 1 libata
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:0364]
Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:0364]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:1364]
Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:1364]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:2364]
Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:2364]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:3364]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:4364]
Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:4364]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 PIC [0800]: VIA Technologies, Inc. CN896/VN896/P4M900 I/O APIC Interrupt Controller [1106:5364] (prog-if 20 [IO(X)-APIC])
Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 I/O APIC Interrupt Controller [1106:5364]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.6 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Security Device [1106:6364]
Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Security Device [1106:6364]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:7364]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fd000000-fe9fffff
Prefetchable memory behind bridge: d8000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:02.0 PCI bridge [0604]: VIA Technologies, Inc. CN896/VN896/P4M900 PCI to PCI Bridge Controller [1106:a364] (rev 80) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Prefetchable memory behind bridge: 00000000fbf00000-00000000fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:03.0 PCI bridge [0604]: VIA Technologies, Inc. CN896/VN896/P4M900 PCI to PCI Bridge Controller [1106:c364] (rev 80) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR+ <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller [1106:3349] (rev 20)
Subsystem: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller [1106:3349]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 219
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at fcfffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 91) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at cc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 91) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 91) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 90) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fcfff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8251 PCI to ISA Bridge [1106:3287]
Subsystem: VIA Technologies, Inc. VT8251 PCI to ISA Bridge [1106:3287]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: i2c-viapro
00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8251 Ultra VLINK Controller [1106:287e]
Subsystem: VIA Technologies, Inc. VT8251 Ultra VLINK Controller [1106:287e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 128
Capabilities: <access denied>
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 7c)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235 [1106:0102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at fcfff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
Kernel modules: via-rhine
00:13.0 Host bridge [0600]: VIA Technologies, Inc. VT8251 Host Bridge [1106:287b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] [1106:3371] (rev 01) (prog-if 00 [VGA controller])
Subsystem: Device [0908:1975]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at fe9f0000 [disabled] [size=64K]
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter [1106:3119] (rev 82)
Subsystem: VIA Technologies, Inc. Device [1106:0110]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at feaffc00 (64-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-velocity
Kernel modules: via-velocity
80:00.0 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCIE Root Port [1106:287c] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
80:00.1 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCIE Root Port [1106:287d] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288]
Subsystem: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (600, 'unstable'), (400, 'stable'), (110, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-486
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-486 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-486 recommends no packages.
Versions of packages linux-image-2.6.26-1-486 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-486/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-486/preinst/overwriting-modules-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/abort-overwrite-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/old-system-map-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/prerm/removing-running-kernel-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/failed-to-move-modules-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/old-initrd-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/abort-install-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/create-kimage-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/bootloader-test-error-2.6.26-1-486:
linux-image-2.6.26-1-486/preinst/bootloader-initrd-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/elilo-initrd-2.6.26-1-486: true
linux-image-2.6.26-1-486/preinst/initrd-2.6.26-1-486:
linux-image-2.6.26-1-486/postinst/bootloader-error-2.6.26-1-486:
linux-image-2.6.26-1-486/preinst/lilo-initrd-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/depmod-error-2.6.26-1-486: false
linux-image-2.6.26-1-486/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-486/prerm/would-invalidate-boot-loader-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/old-dir-initrd-link-2.6.26-1-486: true
linux-image-2.6.26-1-486/postinst/depmod-error-initrd-2.6.26-1-486: false
Regards, Axel
--
Axel Beckert - abe@deuxchevaux.org, abe@noone.org - http://noone.org/abe/
Reply to: