--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-686: Suspend to RAM fails on HP nc8230
- From: Matthias-Christian Ott <matthias.christian@yahoo.de>
- Date: Tue, 28 Oct 2008 23:42:53 +0000
- Message-id: <20081028234253.3126.23966.reportbug@marix>
Package: linux-image-2.6.26-1-686
Version: 2.6.26-8
Severity: normal
I installed Debian Lenny on my new (refurbished) HP nc8230 and tried to suspend the system
RAM. It suspended normally, but failed to resume and just showed a black scren (even if some
disk I/O was recognisable). Some Ubuntu users have reported this behaviour at various sites
and some claim to have fixed it for mysterious reasons (as far as I understood them), thus I
think it could be a distribution-specific bug.
I should point out that the bug occurs with all suspend to RAM utils I have tried out, so I
think it is specific to the kernel. Also this is not related to X.org or the proprietary ATI
graphics driver, because I currently use text-mode via vga (anyhow I just booted Ubuntu 8.04
Live CD which also doesn't work).
In case the bug is not specific to Debian I will forward it the Kernel bug tracker.
-- Package-specific info: ** Version: Linux version 2.6.26-1-686 (Debian 2.6.26-8)
(waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Oct 9 15:18:09 UTC 2008
** Command line:
root=/dev/hda1 ro quiet
** Not tainted
** Kernel log:
[ 3.261308] hda: cache flushes supported
[ 3.261346] hda: hda1 hda2 < hda5 >
[ 3.290213] hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 3.290213] Uniform CD-ROM driver Revision: 3.20
[ 3.411644] PM: Starting manual resume from disk
[ 3.450708] kjournald starting. Commit interval 5 seconds
[ 3.450708] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.616156] ieee1394: Host added: ID:BUS[0-00:1023] GUID[a54e4e5700508b71]
[ 5.058893] udevd version 125 started
[ 5.703669] Linux agpgart interface v0.103
[ 5.964536] input: Power Button (FF) as /class/input/input1
[ 5.992045] ACPI: Power Button (FF) [PWRF]
[ 5.992150] input: Sleep Button (CM) as /class/input/input2
[ 6.024049] ACPI: Sleep Button (CM) [C1F2]
[ 6.024120] input: Lid Switch as /class/input/input3
[ 6.036147] ACPI: Lid Switch [C1F3]
[ 6.036610] ACPI: AC Adapter [C176] (on-line)
[ 6.149374] ACPI: Battery Slot [C178] (battery present)
[ 6.150062] ACPI: Battery Slot [C177] (battery absent)
[ 6.150426] ACPI: WMI: Mapper loaded
[ 6.529258] input: Video Bus as /class/input/input4
[ 6.558610] ACPI: Video Device [C0FA] (multi-head: yes rom: no post: no)
[ 7.158332] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 7.158406] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 7.158435] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.276327] intel_rng: FWH not detected
[ 7.312535] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 21
[ 7.312557] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 7.378927] ieee80211_crypt: registered algorithm 'NULL'
[ 7.381382] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 7.381385] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 7.478514] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 7.478518] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 7.624291] input: PC Speaker as /class/input/input5
[ 7.926914] tpm_inf_pnp 00:05: Found C1BB with ID IFX0101
[ 7.926965] tpm_inf_pnp 00:05: TPM found: config base 0x560, data base 0x570, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
[ 7.936488] NET: Registered protocol family 23
[ 7.961321] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44793/0x300000
[ 7.961326] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 8.000508] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 8.031114] parport_pc 00:04: reported by Plug and Play ACPI
[ 8.031185] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 8.032568] found SMC SuperIO Chip (devid=0x7a rev=00 base=0x004e): LPC47N227
[ 8.032589] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 3, mode: 0x0e
[ 8.032592] smsc_ircc_present: can't get sir_base of 0x3e8
[ 8.059021] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.236026] intel8x0_measure_ac97_clock: measured 55471 usecs
[ 8.236030] intel8x0: clocking to 48000
[ 8.236685] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 22
[ 8.236711] PCI: Setting latency timer of device 0000:00:1e.3 to 64
[ 8.240599] Yenta: CardBus bridge found at 0000:02:06.0 [103c:0934]
[ 8.240625] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 8.240627] IO window: 0x00004000-0x000040ff
[ 8.240632] IO window: 0x00004400-0x000044ff
[ 8.240638] PREFETCH window: 0x34000000-0x343fffff
[ 8.240644] MEM window: 0x30000000-0x33ffffff
[ 8.240651] Yenta: Enabling burst memory read transactions
[ 8.240657] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 8.240659] Yenta: Routing CardBus interrupts to PCI
[ 8.240665] Yenta TI: socket 0000:02:06.0, mfunc 0x01111b22, devctl 0x64
[ 8.472712] Yenta: ISA IRQ mask 0x0c78, PCI irq 18
[ 8.472717] Socket status: 30000006
[ 8.472720] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 8.472725] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 8.472728] cs: IO port probe 0x4000-0x4fff: clean.
[ 8.472959] pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc87fffff
[ 8.473245] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 8.481619] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 8.481658] firmware: requesting ipw2200-bss.fw
[ 8.696006] ipw2200: Radio Frequency Kill Switch is On:
[ 8.696006] Kill switch must be turned off for wireless networking to work.
[ 8.696006] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 8.696284] ACPI: PCI Interrupt 0000:02:06.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 9.044818] cs: IO port probe 0x100-0x3af: clean.
[ 9.046501] cs: IO port probe 0x3e0-0x4ff: clean.
[ 9.047165] cs: IO port probe 0x820-0x8ff: clean.
[ 9.047752] cs: IO port probe 0xc00-0xcf7: clean.
[ 9.048487] cs: IO port probe 0xa00-0xaff: clean.
[ 9.829366] Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 across:1510068k
[ 10.307912] EXT3 FS on hda1, internal journal
[ 10.569294] loop: module loaded
[ 12.780096] input: PS/2 Generic Mouse as /class/input/input7
[ 42.136034] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 42.708034] usb 2-2: device not accepting address 2, error -71
[ 42.764059] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 43.544034] usb 2-2: new full speed USB device using uhci_hcd and address 4
[ 43.761621] usb 2-2: configuration #1 chosen from 1 choice
[ 43.763447] usb 2-2: New USB device found, idVendor=03f0, idProduct=011d
[ 43.763447] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 43.763447] usb 2-2: Product: HP integrated Bluetooth module
[ 43.763447] usb 2-2: Manufacturer: Broadcom
[ 44.338427] Bluetooth: Core ver 2.11
[ 44.339080] NET: Registered protocol family 31
[ 44.339083] Bluetooth: HCI device and connection manager initialized
[ 44.339086] Bluetooth: HCI socket layer initialized
[ 44.363674] Bluetooth: HCI USB driver ver 2.9
[ 44.365216] usbcore: registered new interface driver hci_usb
[ 513.979190] NET: Registered protocol family 10
[ 513.979616] lo: Disabled Privacy Extensions
[ 524.372064] eth1: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 235300 8
acpi_cpufreq 6796 0
cpufreq_userspace 3172 0
cpufreq_ondemand 6476 1
cpufreq_conservative 5960 0
cpufreq_stats 3776 0
freq_table 4224 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 1856 0
hci_usb 12252 0
bluetooth 44900 1 hci_usb
loop 12748 0
pcmcia 29548 0
joydev 8480 0
irtty_sir 4480 0
sir_dev 10724 1 irtty_sir
irda 95480 1 sir_dev
tpm_infineon 6984 0
tpm 12928 1 tpm_infineon
tpm_bios 5472 1 tpm
crc_ccitt 2080 1 irda
parport_pc 22500 0
parport 30988 1 parport_pc
pcspkr 2432 0
tifm_7xx1 5216 0
ipw2200 123560 0
tifm_core 7548 1 tifm_7xx1
yenta_socket 20620 1
rsrc_nonstatic 9504 1 yenta_socket
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
ieee80211 27048 1 ipw2200
ieee80211_crypt 5124 1 ieee80211
firmware_class 6816 2 pcmcia,ipw2200
serio_raw 4740 0
psmouse 32336 0
snd_intel8x0m 12492 0
snd_intel8x0 26268 0
snd_ac97_codec 88484 2 snd_intel8x0m,snd_intel8x0
rng_core 3940 0
ac97_bus 1728 1 snd_ac97_codec
snd_pcm 62628 3 snd_intel8x0m,snd_intel8x0,snd_ac97_codec
snd_timer 17800 1 snd_pcm
snd 45604 5 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 3 snd_intel8x0m,snd_intel8x0,snd_pcm
iTCO_wdt 9508 0
container 3456 0
video 16400 0
output 2912 1 video
wmi 6440 0
battery 10180 0
ac 4196 0
button 6064 0
intel_agp 22300 0
agpgart 28776 1 intel_agp
evdev 8000 0
ext3 105256 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 3
ata_generic 4676 0
libata 140384 1 ata_generic
scsi_mod 129356 1 libata
dock 8272 1 libata
piix 6568 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 96168 4 ide_cd_mod,ide_disk,piix,ide_pci_generic
sdhci 13060 0
mmc_core 39932 1 sdhci
ohci1394 24944 0
ieee1394 75800 1 ohci1394
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 4 hci_usb,ehci_hcd,uhci_hcd
tg3 84676 0
thermal 15228 0
processor 32576 3 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
not available
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-14 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--- End Message ---