Bug#503766: linux-image-2.6.26-1-amd64: intelfb puts console screen into standby
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-8
Severity: important
When intelfb is loaded, the screen goes into standby immediately. System is Dell Dimension E520.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-8) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Oct 9 14:16:53 UTC 2008
** Command line:
ro root=/dev/sda2
** Not tainted
** Kernel log:
[ 4.727838] input: CHICONY HP Basic USB Keyboard as /class/input/input1
[ 4.736094] input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1a.0-1
[ 4.750776] input: Microsoft Microsoft Wheel Mouse Optical? as /class/input/input2
[ 4.760098] input,hidraw1: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical?] on usb-0000:00:1a.0-2
[ 4.760339] usbcore: registered new interface driver usbhid
[ 4.760415] usbhid: v2.6:USB HID core driver
[ 4.812075] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x33 impl RAID mode
[ 4.812191] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 4.812297] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.812734] scsi0 : ahci
[ 4.813356] scsi1 : ahci
[ 4.813893] scsi2 : ahci
[ 4.814419] scsi3 : ahci
[ 4.814950] scsi4 : ahci
[ 4.815478] scsi5 : ahci
[ 4.815616] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 1277
[ 4.815724] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 1277
[ 4.815828] ata3: DUMMY
[ 4.815887] ata4: DUMMY
[ 4.815947] ata5: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970300 irq 1277
[ 4.816067] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 1277
[ 5.136022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.183641] ata1.00: ATA-7: ST3808110AS, 3.ADJ, max UDMA/133
[ 5.183641] ata1.00: 156250000 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.183641] ata1.00: configured for UDMA/133
[ 5.592019] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.248019] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.256980] ata5.00: ATAPI: SONY CD-RW/DVD-ROM CRX310S, VDK2, max UDMA/100
[ 6.260003] ata5.00: configured for UDMA/100
[ 6.584016] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.584260] scsi 0:0:0:0: Direct-Access ATA ST3808110AS 3.AD PQ: 0 ANSI: 5
[ 6.656005] scsi 4:0:0:0: CD-ROM SONY CDRWDVD CRX310S VDK2 PQ: 0 ANSI: 5
[ 6.656005] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 6.830659] tulip0: EEPROM default media type Autosense.
[ 6.830733] tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
[ 6.841637] tulip0: MII transceiver #0 config 1000 status 782d advertising 01e1.
[ 6.842086] eth2: Digital DS21140 Tulip rev 34 at Port 0xdc80, 00:80:c8:f6:a0:bb, IRQ 18.
[ 6.866987] Driver 'sd' needs updating - please use bus_type methods
[ 6.867219] sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 6.867328] sd 0:0:0:0: [sda] Write Protect is off
[ 6.867399] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.867445] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.867655] sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 6.867759] sd 0:0:0:0: [sda] Write Protect is off
[ 6.867829] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.867876] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.867988] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.919789] sda1 sda2 sda3 sda4 < sda5 >
[ 6.938803] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.872005] sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
[ 7.872005] Uniform CD-ROM driver Revision: 3.20
[ 7.872005] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 7.952853] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.952971] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 36.933146] PM: Starting manual resume from disk
[ 36.960468] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 36.962417] SGI XFS Quota Management subsystem
[ 37.005152] XFS mounting filesystem sda2
[ 37.109016] Ending clean XFS mount for filesystem: sda2
[ 38.486009] udevd version 125 started
[ 38.873518] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 39.637312] agpgart: Detected an Intel 965G Chipset.
[ 39.637582] agpgart: Detected 7676K stolen memory.
[ 39.655675] agpgart: AGP aperture is 256M @ 0xc0000000
[ 39.720870] input: Power Button (FF) as /class/input/input3
[ 39.748090] ACPI: Power Button (FF) [PWRF]
[ 39.748256] input: Power Button (CM) as /class/input/input4
[ 39.780092] ACPI: Power Button (CM) [VBTN]
[ 40.059898] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets
[ 40.060054] intelfb: Version 0.9.5
[ 40.060224] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.060365] intelfb: 00:02.0: Intel(R) 965G, aperture size 256MB, stolen memory 7932kB
[ 40.065168] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 40.065280] intelfb: unable to set MTRR
[ 40.065354] intelfb: Initial video mode is 1024x768-32@70.
[ 40.087726] Console: switching to colour frame buffer device 128x48
[ 40.295646] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.296382] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.315557] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 40.316295] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 40.316974] iTCO_wdt: No card detected
[ 40.543974] input: PC Speaker as /class/input/input5
[ 40.596969] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 20
[ 40.628581] Error: Driver 'pcspkr' is already registered, aborting...
[ 70.608278] Adding 755012k swap on /dev/sda5. Priority:42 extents:1 across:755012k
[ 71.677709] loop: module loaded
[ 72.090465] kjournald starting. Commit interval 5 seconds
[ 72.090701] EXT3 FS on sda1, internal journal
[ 72.090709] EXT3-fs: mounted filesystem with ordered data mode.
[ 75.385251] intra: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 75.385256] intra: 10/100 speed: disabling TSO
[ 75.840583] inet: Setting full-duplex based on MII#0 link partner capability of 41e1.
[ 76.932729] lp: driver loaded but no devices found
[ 76.974031] ppdev: user-space parallel port driver
[ 77.244002] tg3: bkup: Link is up at 1000 Mbps, full duplex.
[ 77.244002] tg3: bkup: Flow control is off for TX and off for RX.
[ 77.686924] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 78.169047] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 80.857003] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 122.213480] iptables/ssh-in IN=intra OUT= MAC=00:19:d1:27:90:3e:00:16:76:c2:ed:00:08:00 SRC=192.168.0.111 DST=192.168.0.13 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=11481 DF PROTO=TCP SPT=1232 DPT=22 WINDOW=65535 RES=0x00 SYN URGP=0
** Loaded modules:
Module Size Used by
ipt_recent 12704 3
ipt_addrtype 6912 4
xt_pkttype 6272 4
xt_conntrack 8704 9
iptable_nat 9872 1
nf_nat 23192 1 iptable_nat
nf_conntrack_ipv4 19352 12 iptable_nat,nf_nat
nf_conntrack 71440 4 xt_conntrack,iptable_nat,nf_nat,nf_conntrack_ipv4
xt_tcpudp 7680 15
xt_multiport 7424 1
ipt_REJECT 7552 7
ipt_LOG 10116 9
xt_limit 7172 5
iptable_filter 7424 1
ip_tables 21520 2 iptable_nat,iptable_filter
x_tables 25224 11 ipt_recent,ipt_addrtype,xt_pkttype,xt_conntrack,iptable_nat,xt_tcpudp,xt_multiport,ipt_REJECT,ipt_LOG,xt_limit,ip_tables
ppdev 11656 0
lp 14724 0
parport 41776 2 ppdev,lp
video 24084 0
output 7808 1 video
ac 9352 0
battery 16904 0
ext3 124688 1
jbd 51240 1 ext3
mbcache 12804 1 ext3
loop 19468 0
serio_raw 9860 0
pcspkr 7040 0
psmouse 42268 0
i2c_i801 13596 0
iTCO_wdt 15696 0
snd_hda_intel 434776 0
snd_pcm 81800 1 snd_hda_intel
snd_timer 25744 1 snd_pcm
snd 63688 3 snd_hda_intel,snd_pcm,snd_timer
soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
intelfb 38184 1
i2c_algo_bit 10244 1 intelfb
i2c_core 27936 3 i2c_i801,intelfb,i2c_algo_bit
button 11680 0
intel_agp 31728 1
evdev 14208 0
dcdbas 11952 0
xfs 475432 1
sg 36448 0
sr_mod 19652 0
cdrom 37928 1 sr_mod
sd_mod 29376 4
usbhid 45792 0
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
ahci 32520 3
tulip 54048 0
libata 165472 1 ahci
scsi_mod 160760 4 sg,sr_mod,sd_mod,libata
dock 14112 1 libata
tg3 97156 0
ehci_hcd 36108 0
uhci_hcd 25760 0
e1000e 99748 0
thermal 22688 0
processor 42304 1 thermal
fan 9352 0
thermal_sys 17728 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
Subsystem: Dell Device [1028:01dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dfc00000-dfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G965 Integrated Graphics Controller [8086:29a2] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:01dd]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ec98 [size=8]
Capabilities: <access denied>
Kernel driver in use: intelfb
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation 82G965 Integrated Graphics Controller [8086:29a3] (rev 02)
Subsystem: Dell Device [1028:01dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V 10/100 Network Connection [8086:104c] (rev 02)
Subsystem: Dell Device [1028:01dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 1276
Region 0: Memory at dfde0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dfddb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at dfddac00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell Device [1028:01dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfddc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: dfb00000-dfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01dd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: df900000-dfafffff
Prefetchable memory behind bridge: 0000000030000000-00000000300fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller [8086:2812] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA RAID Controller [8086:2822] (rev 02)
Subsystem: Dell Device [1028:01dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 1277
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=32]
Region 5: Memory at ff970000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Dell Device [1028:01dd]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 20
Region 0: Memory at dfddab00 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659] (rev 21)
Subsystem: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1275
Region 0: Memory at dfbf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
03:02.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21140 [FasterNet] [1011:0009] (rev 22)
Subsystem: D-Link System Inc DFE-500TX Fast Ethernet [1186:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5000ns min, 10000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at dc80 [size=128]
Region 1: Memory at df9fff80 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 30000000 [disabled] [size=256K]
Kernel driver in use: tulip
Kernel modules: tulip
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
Reply to: