--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-686: Mis-counts number of CPUs at boot
- From: Johan Walles <johan.walles@gmail.com>
- Date: Wed, 03 Sep 2008 07:16:17 +0200
- Message-id: <20080903051617.24568.21128.reportbug@localhost.localdomain>
Package: linux-image-2.6.26-1-686
Version: 2.6.26-3
Severity: minor
Since 2.6.26-1 I'm getting this from the kernel on every boot:
"
kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
"
2.6.25-2 didn't say anything about 8 CPUs.
Here's my /proc/cpuinfo, will attach full dmesg:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) D CPU 3.20GHz
stepping : 4
cpu MHz : 2800.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts
acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts pni monitor ds_cpl est cid cx16 xtpr
bogomips : 6407.21
clflush size : 64
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) D CPU 3.20GHz
stepping : 4
cpu MHz : 2800.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts
acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts pni monitor ds_cpl est cid cx16 xtpr
bogomips : 6400.73
clflush size : 64
power management:
Regards //Johan
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-3) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Aug 20 12:56:41 UTC 2008
** Command line:
root=/dev/sda2 ro
** Not tainted
** Kernel log:
[ 4.964543] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.964605] usb usb5: Product: EHCI Host Controller
[ 4.964653] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 4.964702] usb usb5: SerialNumber: 0000:00:1d.7
[ 4.967849] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 5.039835] e100: eth1: e100_probe: addr 0xe0420000, irq 18, MAC addr 00:02:b3:94:c4:c0
[ 5.039835] Uniform Multi-Platform E-IDE driver
[ 5.039896] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 5.040031] ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1
[ 5.040031] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17
[ 5.040031] ICH7: not 100% native mode: will probe irqs later
[ 5.040031] ide0: BM-DMA at 0x20a0-0x20a7
[ 5.040096] ide1: BM-DMA at 0x20a8-0x20af
[ 5.040147] Probing IDE interface ide0...
[ 5.372236] usb 1-2: device not accepting address 2, error -71
[ 5.428261] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 5.828440] hda: HL-DT-STDVDRRW GWA-4166B, ATAPI CD/DVD-ROM drive
[ 6.164281] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 6.164519] hda: UDMA/44 mode selected
[ 6.168725] Probing IDE interface ide1...
[ 6.752374] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.752482] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.770249] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 6.770499] Uniform CD-ROM driver Revision: 3.20
[ 6.864330] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 7.019855] usb 2-1: configuration #1 chosen from 1 choice
[ 7.055932] usb 2-1: New USB device found, idVendor=09da, idProduct=0006
[ 7.055988] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.056041] usb 2-1: Product: USB Optical Mouse
[ 7.056088] usb 2-1: Manufacturer: A4Tech
[ 7.295864] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 7.471828] usb 2-2: configuration #1 chosen from 1 choice
[ 7.555816] usb 2-2: New USB device found, idVendor=0fce, idProduct=d092
[ 7.555875] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.555929] usb 2-2: Product: P1i
[ 7.555977] usb 2-2: Manufacturer: Sony Ericsson Mobile Communications
[ 7.556030] usb 2-2: SerialNumber: 35703301206848
[ 7.557651] usbcore: registered new interface driver hiddev
[ 7.678800] floppy0: no floppy controllers found
[ 7.794789] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 8.122861] usb 1-2: configuration #1 chosen from 1 choice
[ 8.135021] usb 1-2: New USB device found, idVendor=046d, idProduct=c30e
[ 8.135076] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.135129] usb 1-2: Product: HID compliant keyboard
[ 8.135177] usb 1-2: Manufacturer: Logitech
[ 8.375223] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 8.531212] usb 3-2: configuration #1 chosen from 1 choice
[ 8.556171] usb 3-2: New USB device found, idVendor=046d, idProduct=c215
[ 8.556225] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.556278] usb 3-2: Product: Logitech Extreme 3D Pro
[ 8.556327] usb 3-2: Manufacturer: Logitech
[ 8.569421] input: A4Tech USB Optical Mouse as /class/input/input1
[ 8.573345] input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.1-1
[ 8.632384] input: Logitech HID compliant keyboard as /class/input/input2
[ 8.632384] input,hidraw1: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.0-2
[ 8.684404] input: Logitech HID compliant keyboard as /class/input/input3
[ 8.684404] input,hidraw2: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.0-2
[ 8.773556] input: Logitech Logitech Extreme 3D Pro as /class/input/input4
[ 8.773556] input,hidraw3: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D Pro] on usb-0000:00:1d.2-2
[ 8.773556] usbcore: registered new interface driver usbhid
[ 8.773556] usbhid: v2.6:USB HID core driver
[ 8.884382] kjournald starting. Commit interval 5 seconds
[ 8.884382] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.649049] udevd version 125 started
[ 12.179505] input: PC Speaker as /class/input/input5
[ 12.374022] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 12.374022] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0xf860)
[ 12.374022] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.412449] cdc_acm 2-2:1.1: ttyACM0: USB ACM device
[ 12.475867] parport_pc 00:07: reported by Plug and Play ACPI
[ 12.475867] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 12.478428] parport0: Printer, Brother HL-2070N series
[ 12.544625] ACPI: WMI: Mapper loaded
[ 12.592062] input: Power Button (FF) as /class/input/input6
[ 12.610219] cdc_acm 2-2:1.3: ttyACM1: USB ACM device
[ 12.613592] cdc_acm 2-2:1.5: ttyACM2: USB ACM device
[ 12.613938] usbcore: registered new interface driver cdc_acm
[ 12.613997] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 12.621018] intel_rng: Firmware space is locked read-only. If you can't or
[ 12.621018] intel_rng: don't want to disable this in firmware setup, and if
[ 12.621018] intel_rng: you are certain that your system has a functional
[ 12.621018] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 12.639167] Error: Driver 'pcspkr' is already registered, aborting...
[ 12.653436] ACPI: Power Button (FF) [PWRF]
[ 12.653593] input: Power Button (CM) as /class/input/input7
[ 12.712768] ACPI: Power Button (CM) [PBTN]
[ 12.732704] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 12.732704] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 15.386698] floppy0: no floppy controllers found
[ 16.813169] EXT3 FS on sda2, internal journal
[ 17.010945] smsc47b397: found SMSC SCH5307-NS (base address 0x0480, revision 0)
[ 17.083381] device-mapper: uevent: version 1.0.3
[ 17.083381] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 17.483304] NTFS driver 2.1.29 [Flags: R/W MODULE].
[ 17.516413] NTFS volume version 3.1.
[ 22.042440] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 22.042440] tg3: eth0: Flow control is on for TX and on for RX.
[ 30.821270] lp0: using parport0 (interrupt-driven).
[ 30.849846] ppdev: user-space parallel port driver
[ 36.022134] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
** Loaded modules:
Module Size Used by
binfmt_misc 7528 1
ppdev 6468 0
lp 8164 0
video 16400 0
output 2912 1 video
ac 3264 0
battery 6272 0
acpi_cpufreq 6796 0
cpufreq_userspace 3172 0
cpufreq_stats 3776 0
cpufreq_powersave 1856 0
cpufreq_ondemand 6476 2
freq_table 4224 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 5960 0
nls_utf8 1760 1
ntfs 185856 1
nls_base 6820 2 nls_utf8,ntfs
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
smsc47b397 4776 0
snd_hda_intel 324248 3
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
button 6064 0
snd_pcm 62628 2 snd_hda_intel,snd_pcm_oss
snd_timer 17800 1 snd_pcm
wmi 6440 0
psmouse 32336 0
rng_core 3940 0
serio_raw 4740 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
joydev 8480 0
cdc_acm 12224 0
iTCO_wdt 9508 0
evdev 8000 5
snd 45604 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
pcspkr 2432 0
ext3 105256 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
ide_cd_mod 27684 0
cdrom 30176 1 ide_cd_mod
piix 6568 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 92628 3 ide_cd_mod,piix,ide_pci_generic
e100 28908 0
mii 4896 1 e100
ata_generic 4676 0
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 5 cdc_acm,usbhid,ehci_hcd,uhci_hcd
tg3 84516 0
thermal 15228 0
processor 32576 2 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
sd_mod 22200 3
ahci 23176 3
libata 140416 2 ata_generic,ahci
scsi_mod 129356 2 sd_mod,libata
dock 8272 1 libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82955X Memory Controller Hub [8086:2774]
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82955X PCI Express Root Port [8086:2775]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e1000000-e31fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at e0a00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
Memory behind bridge: e0500000-e07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 2000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 2020 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 2040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 22
Region 4: I/O ports at 2060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e0a04000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e0200000-e04fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 20a0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller [8086:27c1] (rev 01) (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 219
Region 0: I/O ports at 20d0 [size=8]
Region 1: I/O ports at 20e8 [size=4]
Region 2: I/O ports at 20d8 [size=8]
Region 3: I/O ports at 20ec [size=4]
Region 4: I/O ports at 20b0 [size=16]
Region 5: Memory at e0a04400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [Quadro NVS 285] [10de:0165] (rev a1)
Subsystem: nVidia Corporation Device [10de:029d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb
05:09.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 0d)
Subsystem: Intel Corporation Device [8086:1050]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0420000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1000 [size=64]
Region 2: Memory at e0400000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e100
Kernel modules: e100, eepro100
3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3013]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 218
Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
--- End Message ---