--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-amd64: messed up keymap on 2.6.26-1, works fine 2.6.25-2
- From: tabris <tabris@tabris.net>
- Date: Sun, 07 Sep 2008 20:26:37 -0700
- Message-id: <20080908032637.3931.80885.reportbug@eris.tabris.net>
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-4
Severity: important
Various keys do not work. Sometimes arrow keys, PgUp/PgDn, always the Insert key (regular one, not numpad. numpad with
numlock off always works). Makes navigating in elinks or mc hard.
No problem in X, only occurs in console.
A couple minutes ago the arrow keys were working, and then while editing this bug report, the arrow-keys have stopped
functional. Numpad keys always function if you turn off the NumLock.
2.6.25-2 works fine, 2.6.24-1 also works fine.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC 2008
** Command line:
root=/dev/sda3 ro pci=nomsi vga=790 video=vesa:ypan,ywrap
** Not tainted
** Kernel log:
[ 11.707324] input: Power Button (CM) as /class/input/input5
[ 11.763390] ACPI: Power Button (CM) [PWRB]
[ 12.016705] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 12.150645] input: PC Speaker as /class/input/input6
[ 12.210644] gameport: EMU10K1 is pci0000:02:01.1/gameport0, io 0xe880, speed 593kHz
[ 12.510959] Error: Driver 'pcspkr' is already registered, aborting...
[ 12.744879] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 14.039844] Adding 7815612k swap on /dev/sda2. Priority:-1 extents:1 across:7815612k
[ 15.128389] loop: module loaded
[ 15.184062] it87: Found IT8726F chip at 0xe80, revision 1
[ 15.187251] it87: in3 is VCC (+5V)
[ 15.307096] device-mapper: uevent: version 1.0.3
[ 15.311348] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 15.761962] kjournald starting. Commit interval 5 seconds
[ 15.765265] EXT3 FS on sda1, internal journal
[ 15.768451] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.831901] XFS mounting filesystem sda4
[ 15.951512] Ending clean XFS mount for filesystem: sda4
[ 17.065218] skge eth0: enabling interface
[ 18.697351] NET: Registered protocol family 10
[ 18.697807] lo: Disabled Privacy Extensions
[ 18.699763] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.575966] skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 19.579126] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.240083] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[ 20.241202] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6
[ 20.241202] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8
[ 20.241202] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa
[ 20.241202] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc
[ 20.241202] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe
[ 20.241202] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 20.241202] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 20.241202] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 30.221980] pnp: the driver 'parport_pc' has been registered
[ 30.223945] lp: driver loaded but no devices found
[ 30.314968] ppdev: user-space parallel port driver
[ 30.603769] Clocksource tsc unstable (delta = -215929043 ns)
[ 30.971861] eth0: no IPv6 routers present
[ 35.363383] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 414.678709] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.678709] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.686713] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.686713] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.694714] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.694714] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.702713] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.702713] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.710713] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.710713] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.718714] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.718714] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.726714] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.726714] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.734714] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.734714] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.742786] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.742996] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.750713] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.750713] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.761906] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.761906] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.769980] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.770190] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.777906] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.777906] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.785907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.785907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.793907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.793907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.801907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.801907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.809907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.809907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.817907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.817907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.825907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.825907] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.833906] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.833906] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.841985] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.842195] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.849911] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.849911] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.857909] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.857909] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.865909] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.865909] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 414.873908] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input0, status -71
[ 414.873908] usb 6-4.1: USB disconnect, address 4
[ 414.877952] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:13.5-4.1/input1, status -71
[ 415.187058] usb 6-4.1: new low speed USB device using ehci_hcd and address 5
[ 415.284138] usb 6-4.1: configuration #1 chosen from 1 choice
[ 415.354799] input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7 as /class/input/input7
[ 415.406260] input,hidraw1: USB HID v1.10 Keyboard [USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7] on usb-0000:00:13.5-4.1
[ 415.414495] input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7 as /class/input/input8
[ 415.470052] input,hidraw2: USB HID v1.10 Mouse [USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7] on usb-0000:00:13.5-4.1
[ 415.473963] usb 6-4.1: New USB device found, idVendor=0b39, idProduct=0d04
[ 415.477782] usb 6-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 415.478310] usb 6-4.1: Product: USB KVM Switch 4 PORT V2.7
[ 415.481781] usb 6-4.1: Manufacturer: USB KVM Switch 4 PORT V2.7
** Loaded modules:
Module Size Used by
ppdev 11656 0
parport_pc 31016 0
lp 14724 0
parport 41776 3 ppdev,parport_pc,lp
powernow_k8 17156 1
cpufreq_stats 9120 0
cpufreq_ondemand 11792 1
freq_table 9344 3 powernow_k8,cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 6400 0
cpufreq_conservative 11784 0
cpufreq_userspace 8452 0
ipv6 288200 32
ext3 124688 1
jbd 51240 1 ext3
mbcache 12804 1 ext3
dm_snapshot 19400 0
dm_mirror 20608 0
dm_log 13956 1 dm_mirror
dm_mod 58864 3 dm_snapshot,dm_mirror,dm_log
it87 28696 0
hwmon_vid 7296 1 it87
loop 19468 0
snd_emu10k1_synth 10752 0
snd_emux_synth 36864 1 snd_emu10k1_synth
snd_seq_virmidi 10112 1 snd_emux_synth
snd_seq_midi_emul 10496 1 snd_emux_synth
snd_emu10k1 141536 2 snd_emu10k1_synth
firmware_class 12544 1 snd_emu10k1
snd_ac97_codec 115416 1 snd_emu10k1
ac97_bus 6272 1 snd_ac97_codec
snd_util_mem 8960 2 snd_emux_synth,snd_emu10k1
snd_hwdep 12040 2 snd_emux_synth,snd_emu10k1
snd_seq_dummy 7428 0
snd_seq_oss 33152 0
snd_pcm_oss 41760 0
snd_seq_midi 11072 0
snd_mixer_oss 18816 1 snd_pcm_oss
snd_rawmidi 26784 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq_midi_event 11904 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_pcm 81800 4 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_seq 54304 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 25744 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 11668 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_page_alloc 13072 2 snd_emu10k1,snd_pcm
serio_raw 9860 0
emu10k1_gp 7552 0
snd 63688 14 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_hwdep,snd_seq_oss,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device
pcspkr 7040 0
psmouse 42268 0
gameport 17040 2 emu10k1_gp
k8temp 9216 0
soundcore 12064 1 snd
i2c_piix4 13072 0
i2c_core 27936 1 i2c_piix4
button 11680 0
joydev 14848 0
evdev 14208 5
xfs 475432 2
ata_generic 10116 0
sg 36448 0
usbhid 45792 2
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
sr_mod 19652 0
cdrom 37928 1 sr_mod
atiixp 8324 0 [permanent]
sd_mod 29376 5
floppy 61672 0
ehci_hcd 36108 0
skge 41744 0
ide_pci_generic 9220 0 [permanent]
ohci1394 32564 0
ieee1394 93816 1 ohci1394
ahci 32520 4
ide_core 128284 2 atiixp,ide_pci_generic
libata 165472 2 ata_generic,ahci
scsi_mod 160760 4 sg,sr_mod,sd_mod,libata
ohci_hcd 25092 0
dock 14112 1 libata
thermal 22688 0
processor 42304 2 powernow_k8,thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge [1002:5952]
Subsystem: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge [1002:5952]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
00:02.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI-X Root Port [1002:5a34] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8232]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fbdffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbdfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbdfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbdfc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbdf7000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbdf6000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fbdff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 13)
Subsystem: ASUSTeK Computer Inc. Device [1043:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Region 1: Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: ATI Technologies Inc SB600 IDE [1002:438c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ATIIXP_IDE
Kernel modules: ide-pci-generic, atiixp, ata_generic
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 88000000-880fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] [1002:7187] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:0174]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: fglrx
01:00.1 Display controller [0380]: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] (Secondary) [1002:71a7]
Subsystem: ASUSTeK Computer Inc. Device [1043:0175]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fbee0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:01.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 07)
Subsystem: Creative Labs CT4832 SBLive! Value [1102:8027]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at ec00 [size=32]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
02:01.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 07)
Subsystem: Creative Labs Gameport Joystick [1102:0020]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at e880 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
02:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at e800 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
02:04.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbff8000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at e400 [size=256]
Expansion ROM at 88000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
Kernel modules: skge
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92g tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
--- End Message ---