Bug#500963: [linux-image-2.6.26-1-openvz-686] reproducible panic while using network intensively
Package: linux-image-2.6.26-1-openvz-686
Version: 2.6.26-5
Severity: important
File: openvz
*** Please type your report below this line ***
Howdy !
As I am trying the "new" OpenVZ support in Lenny, I am confronted to a very
annoying bug : I experience hard panic (keyboard doesn't answer, which
explains why my panic log may be incomplete, as it is hand-written... I did
what I could ; I am forced to push the power button to stop the machine), at
least once a day (the worst was when it happened 4 times the same day... may
have been more, if I had checked it immediately, which I did not)...
The machine has enough RAM (2GB... and it has been checked intensively), for 6
containers for now (ntp, approx, tor, privoxy, mldonkey, and one devoted to
chrooted sftp), 3 of them having ~256MB of granted RAM, the other having
~48MB of it, plus a little bit of swap. Configs have been crafted using
vzsplit, just multiplying parameters of interest for the machines that do
need more RAM.
The machine works right (it is relatively "old" but has ran some VServers for
a bunch of time), but it is not crucial enough, so I have turned it into a
test machine for now.
The same exact problem occurs during quite intensive network operations : I
have occasionnally reached the barrier (but not the limit) for tcpsndbuf (and
a little bit for tcprcvbuf, but almost not at all), but it is suggested in
the official documentation from OpenVZ that it should only harm network
performance, and not cause some panic (as it can happen with unsafe memory
settings... which are right, by large, in my case).
I have tried a bunch of other network cards : the exact same thing happens.
When the systems hangs, I systematically get the same messages (not for the
time indices, but everything else is as I report it... always the same
message) :
[127711.020009] [<c02924fa>] tcp_v4_do_rcv+0x303/0x437
[127711.020009] [<c0294406>] tcp_v4_rcv+0x58b/0x5dd
[127711.020009] [<c027b284>] ip_local_deliver_finish+0x12e/0x1f4
[127711.020009] [<c027b139>] ip_rcv_finish+0x2e5/0x302
[127711.020009] [<c025f5d7>] netif_receive_skb+0x314/0x3cd
[127711.020009] [<c0261c10>] process_backlog+0x74/0xce
[127711.020009] [<c026170d>] net_rx_action+0x9c
[127711.020009] [<c012ddf6>] __do_softirq+0x9b/0x14e
[127711.020009] [<c012deee>] do_softirq+0x45/0x53
[127711.020009] [<c012e1d9>] irq_exit+Ox69/0x9b
[127711.020009] [<c010b1cb>] do_IRQ+0x52/0x63
[127711.020009] [<c01076af>] default_ide+0x0/0x53
[127711.020009] [<c010934b>] common_interrupt+0x23/0x28
[127711.020009] [<c01076af>] default_idle+0x0/0x53
[127711.020009] [<c011a0b4>] native_safe_halt+0x2/0x3
[127711.020009] [<c01076dc>] default_idle+0x2d/0x53
[127711.020009] [<c0107627>] cpu_idle+0xab/0xbc
[127711.020009] Code: 10 11 d0 83 d0 00 83 3c 24 00 89 44 24 48 c7 44 24 4c 08
00 00 00 74 0a 8b 0c 24 8b 41 04 89 44 24 50 8b 45 14 8d 4c 2d 40 89 ea
<8b> 80 88 02 00 00 8b 80 a0 00 00 00 ff 74 24 44 e8 81 dc fe ff
[127711.020009] EIP: [<c02916f0>] tcp_v4_send_ack +0x1af/0x1ed SS:ESP
0068:c0389db8
[127711.020009] Kernel panic - not syncing: Fatal exception in interrupt
I hope this can help solve the problem, as without it, OpenVZ is really
awesome... Much more better than VServer, noticeably for what concerns
networking :) If I could help with other piece of information, it would be
with pleasure.
Best regards.
Tuomas
-- Package-specific info:
** Version:
Linux version 2.6.26-1-openvz-686 (Debian 2.6.26-5) (waldi@debian.org) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10
19:04:44 UTC 2008
** Command line:
root=/dev/hda1 ro
** Not tainted
** Kernel log:
[ 3.308328] usb usb4: Product: EHCI Host Controller
[ 3.308377] usb usb4: Manufacturer: Linux 2.6.26-1-openvz-686 ehci_hcd
[ 3.308431] usb usb4: SerialNumber: 0000:00:10.3
[ 3.309898] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) ->
IRQ 23
[ 3.314306] eth0: VIA Rhine II at 0x1cc00, 00:0c:76:3d:a2:47, IRQ 23.
[ 3.315071] eth0: MII PHY found at address 1, status 0x7869 advertising
05e1 Link 45e1.
[ 3.315298] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot
0000:00:11.1
[ 3.315378] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 3.315437] VP_IDE: not 100% native mode: will probe irqs later
[ 3.315507] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on
pci0000:00:11.1
[ 3.315579] ide0: BM-DMA at 0xfc00-0xfc07
[ 3.315636] ide1: BM-DMA at 0xfc08-0xfc0f
[ 3.315688] Probing IDE interface ide0...
[ 3.356286] Driver 'sd' needs updating - please use bus_type methods
[ 3.356520] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108
MB)
[ 3.356601] sd 0:0:0:0: [sda] Write Protect is off
[ 3.356653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.356692] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.356841] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108
MB)
[ 3.356916] sd 0:0:0:0: [sda] Write Protect is off
[ 3.356967] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.357004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.357071] sda: sda1 sda2
[ 3.373091] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.732099] hda: ST3250620A, ATA DISK drive
[ 4.404077] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.404262] hda: UDMA/100 mode selected
[ 4.404517] Probing IDE interface ide1...
[ 5.268097] hdc: PLEXTOR DVD-ROM PX-130A, ATAPI CD/DVD-ROM drive
[ 5.604058] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 5.604374] hdc: drive side 80-wire cable detection failed, limiting max
speed to UDMA33
[ 5.604439] hdc: UDMA/33 mode selected
[ 5.605719] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.605837] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.643364] hda: max request size: 512KiB
[ 5.680389] hda: 488397168 sectors (250059 MB) w/16384KiB Cache,
CHS=30401/255/63
[ 5.680389] hda: cache flushes supported
[ 5.680389] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
[ 5.788263] hdc: ATAPI 50X DVD-ROM drive, 512kB Cache
[ 5.788448] Uniform CD-ROM driver Revision: 3.20
[ 6.156255] PM: Starting manual resume from disk
[ 6.181891] kjournald starting. Commit interval 5 seconds
[ 6.181968] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.142747] udevd version 125 started
[ 8.179277] Linux agpgart interface v0.103
[ 8.185935] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.188753] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.195651] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 8.213149] agpgart: AGP aperture is 256M @ 0xe0000000
[ 8.400126] input: Power Button (FF) as /class/input/input1
[ 8.428830] ACPI: Power Button (FF) [PWRF]
[ 8.428995] input: Power Button (CM) as /class/input/input2
[ 8.459599] ACPI: Power Button (CM) [PWRB]
[ 8.459778] input: Sleep Button (CM) as /class/input/input3
[ 8.488108] ACPI: Sleep Button (CM) [SLPB]
[ 9.476539] input: PC Speaker as /class/input/input4
[ 9.501925] NET: Registered protocol family 23
[ 9.791109] Error: Driver 'pcspkr' is already registered, aborting...
[ 9.846905] logips2pp: Detected unknown logitech mouse model 63
[ 10.252005] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input5
[ 10.387679] parport_pc 00:0b: reported by Plug and Play ACPI
[ 10.387836] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 11.054339] Adding 1510068k swap on /dev/hda7. Priority:-1 extents:1
across:1510068k
[ 11.249116] EXT3 FS on hda1, internal journal
[ 11.705239] loop: module loaded
[ 13.509209] kjournald starting. Commit interval 5 seconds
[ 13.509409] EXT3 FS on hda9, internal journal
[ 13.509493] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.528008] kjournald starting. Commit interval 5 seconds
[ 13.528008] EXT3 FS on hda10, internal journal
[ 13.528008] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.565197] kjournald starting. Commit interval 5 seconds
[ 13.565197] EXT3 FS on sda1, internal journal
[ 13.565197] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.572004] kjournald starting. Commit interval 5 seconds
[ 13.588244] EXT3 FS on sda2, internal journal
[ 13.588327] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.605884] kjournald starting. Commit interval 5 seconds
[ 13.605884] EXT3 FS on hda8, internal journal
[ 13.605884] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.626260] kjournald starting. Commit interval 5 seconds
[ 13.626460] EXT3 FS on hda5, internal journal
[ 13.626542] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.656003] kjournald starting. Commit interval 5 seconds
[ 13.656003] EXT3 FS on hda6, internal journal
[ 13.660056] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.696803] kjournald starting. Commit interval 5 seconds
[ 13.697091] EXT3 FS on hda11, internal journal
[ 13.697175] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.001557] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 15.616261] NET: Registered protocol family 10
[ 17.704224] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.240933] warning: `vzctl' uses 32-bit capabilities (legacy support in
use)
[ 19.244791] CT: 3000: started
[ 20.034344] CT: 5000: started
[ 20.906843] CT: 8000: started
[ 21.941114] CT: 8100: started
[ 24.074417] CT: 8200: started
[ 26.372031] eth0: no IPv6 routers present
[ 27.052095] CT: 10200: started
** Loaded modules:
Module Size Used by
vzethdev 9120 0
vznetdev 14500 12
simfs 4756 6
vzdquota 32796 6 [permanent]
vzmon 22856 8 vzethdev,vznetdev
vzdev 3624 4 vzethdev,vznetdev,vzdquota,vzmon
xt_tcpudp 3584 0
xt_length 2528 0
ipt_ttl 2368 0
xt_tcpmss 2752 0
xt_TCPMSS 4448 0
iptable_mangle 4640 0
iptable_filter 4288 0
xt_multiport 3584 0
xt_limit 2948 0
xt_dscp 3136 0
ipt_REJECT 3552 0
ip_tables 11056 2 iptable_mangle,iptable_filter
x_tables 14404 10
xt_tcpudp,xt_length,ipt_ttl,xt_tcpmss,xt_TCPMSS,xt_multiport,xt_limit,xt_dscp,ipt_REJECT,ip_tables
video 17168 0
output 3680 1 video
ac 4964 0
battery 10980 0
ipv6 242112 77 vzmon
loop 13516 0
parport_pc 23396 0
parport 31756 1 parport_pc
snd_pcm 63460 0
snd_timer 18568 1 snd_pcm
snd 46404 2 snd_pcm,snd_timer
soundcore 7136 1 snd
snd_page_alloc 8648 1 snd_pcm
psmouse 33104 0
serio_raw 5508 0
via_ircc 16628 0
irda 96312 1 via_ircc
pcspkr 3200 0
crc_ccitt 2848 1 irda
i2c_viapro 7604 0
i2c_core 20596 1 i2c_viapro
button 6832 0
via_agp 8512 1
shpchp 26360 0
pci_hotplug 24228 1 shpchp
agpgart 29576 1 via_agp
evdev 8736 0
ext3 105864 9
jbd 40212 1 ext3
mbcache 7876 1 ext3
ide_cd_mod 28420 0
cdrom 30976 1 ide_cd_mod
ide_disk 11264 9
ata_generic 5444 0
sd_mod 22968 3
via82cxxx 7716 0 [permanent]
floppy 48516 0
via_rhine 19816 0
mii 5664 1 via_rhine
sata_sil 7944 2
ide_pci_generic 4676 0 [permanent]
ide_core 93492 4 ide_cd_mod,ide_disk,via82cxxx,ide_pci_generic
ehci_hcd 29420 0
uhci_hcd 19504 0
usbcore 119216 3 ehci_hcd,uhci_hcd
libata 141344 2 ata_generic,sata_sil
scsi_mod 130220 2 sd_mod,libata
dock 9040 1 libata
thermal 15996 0
processor 33568 1 thermal
fan 4932 0
thermal_sys 11624 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]
Host Bridge [1106:3189] (rev 80)
Subsystem: VIA Technologies, Inc. Device [1106:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI Bridge
[1106:b198]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dfd00000-dfdfffff
Prefetchable memory behind bridge: 9fc00000-dfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:07.0 RAID bus controller [0104]: Silicon Image, Inc. Adaptec AAR-1210SA
SATA HostRAID Controller [1095:0240] (rev 02) (prog-if 01)
Subsystem: Adaptec Device [9005:0240]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e400 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at dffffe00 (32-bit, non-prefetchable) [size=512]
Expansion ROM at dff00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
82) (prog-if 20)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 21
Region 0: Memory at dffffd00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge
[1106:3177]
Subsystem: VIA Technologies, Inc. Device [1106:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: via-ircc, i2c-viapro
00:11.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 255
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II]
[1106:3065] (rev 74)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at cc00 [size=256]
Region 1: Memory at dffffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
Kernel modules: via-rhine
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AP
[Radeon 9600] [1002:4150]
Subsystem: Club-3D BV Device [196d:1056]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at b800 [size=256]
Region 2: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dfdc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AP [Radeon 9600]
(Secondary) [1002:4170]
Subsystem: Club-3D BV Device [196d:1057]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Region 0: Memory at b0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at dfde0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-openvz-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-openvz-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management
sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel
mo
ii vzctl 3.0.22-11 server virtualization solution -
c
Versions of packages linux-image-2.6.26-1-openvz-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries
[i
Versions of packages linux-image-2.6.26-1-openvz-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy
v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information excluded
Reply to: