[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#498028: marked as done (linux-image-2.6.22-4-686: Second primary partition is reported as zero-sized (or not), depending on hard drive device name.)



Your message dated Mon, 29 Sep 2008 00:54:06 +0200
with message-id <20080928225406.GA21217@wavehammer.waldi.eu.org>
and subject line Re: Bug#498028: The problem is resolved
has caused the Debian Bug report #498028,
regarding linux-image-2.6.22-4-686: Second primary partition is reported as zero-sized (or not), depending on hard drive device name.
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
498028: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=498028
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.22-4-686
Version: 2.6.22-6~bpo40+2
Severity: normal


Second primary partition is reported as zero-sized, depending on device name.

root@dannan ~ #fdisk -l /dev/sdb

Disk /dev/sdb: 750.1 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1           7       56196   83  Linux
/dev/sdb2               8       12456    99996592+  83  Linux
/dev/sdb3           12457       91201   632519212+  83  Linux

root@dannan ~ #blockdev --getsize64 /dev/sdb2
0

root@dannan ~ #pvdisplay 
   
  --- Physical volume ---
  PV Name               /dev/sdb3
  VG Name               dannan
  PV Size               603,21 GB / not usable 0   
  Allocatable           yes 
  PE Size (KByte)       4096
  Total PE              154423
  Free PE               73182
  Allocated PE          81241
  PV UUID               CH7weo-DSgP-Ekqd-7ZW0-gkvF-xQzh-bPWVR4
   
Plug in another SATA drive, so that sdb would become sdc.

root@dannan /root #pvdisplay 
   
  --- Physical volume ---
  PV Name               /dev/sdc3
  VG Name               dannan
  PV Size               603,21 GB / not usable 0   
  Allocatable           yes 
  PE Size (KByte)       4096
  Total PE              154423
  Free PE               73182
  Allocated PE          81241
  PV UUID               CH7weo-DSgP-Ekqd-7ZW0-gkvF-xQzh-bPWVR4

root@dannan /root #blockdev --getsize64 /dev/sdc2
102396510720

root@dannan /root #fdisk -l /dev/sdc

Disk /dev/sdc: 750.1 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *           1           7       56196   83  Linux
/dev/sdc2               8       12456    99996592+  83  Linux
/dev/sdc3           12457       91201   632519212+  83  Linux

-- Package-specific info:
** Version:
Linux version 2.6.22-4-686 (Debian 2.6.22-6~bpo40+2) (nobse@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Feb 12 16:29:32 UTC 2008

** Tainted: P (1)

** Kernel log:
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 21, io base 0x0000e500
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 22, io base 0x0000e200
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e300
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000e400
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbvision
USBVision USB Video Device Driver for Linux : 0.9.9
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfa205000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 22, io mem 0xfa204000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
usb 1-2: USB disconnect, address 2
usb 1-2: new full speed USB device using uhci_hcd and address 3
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
usb 1-2: configuration #1 chosen from 1 choice
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 21
ahci 0000:03:00.0: version 2.2
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi7 : ahci
scsi8 : ahci
ata8: SATA max UDMA/133 cmd 0xf8d6c100 ctl 0x00000000 bmdma 0x00000000 irq 16
ata9: SATA max UDMA/133 cmd 0xf8d6c180 ctl 0x00000000 bmdma 0x00000000 irq 16
ata8: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: RTL8168b/8111b at 0xf8d6a000, 00:1a:4d:5c:18:ac, IRQ 17
ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 18 (level, low) -> IRQ 21
firewire_ohci: Added fw-ohci device 0000:05:06.0, OHCI version 1.10
firewire_core: created new fw device fw0 (0 config rom retries)
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input1
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
r8169: eth0: link up
r8169: eth0: link up
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008

** Loaded modules:
Module                  Size  Used by
nvidia               7819584  18 
ipt_recent              9048  2 
nf_conntrack_ipv4      17964  2 
xt_state                2560  2 
nf_conntrack           60744  2 nf_conntrack_ipv4,xt_state
nfnetlink               5944  2 nf_conntrack_ipv4,nf_conntrack
xt_tcpudp               3232  2 
iptable_filter          3104  1 
ip_tables              12420  1 iptable_filter
x_tables               14564  4 ipt_recent,xt_state,xt_tcpudp,ip_tables
nfs                   224684  0 
lockd                  60584  1 nfs
nfs_acl                 3616  1 nfs
sunrpc                158396  4 nfs,lockd,nfs_acl
autofs4                20612  2 
ipv6                  238500  30 
tsdev                   8160  0 
psmouse                36272  0 
parport_pc             33956  0 
parport                34120  1 parport_pc
pcspkr                  3232  0 
rtc                    12984  0 
firewire_ohci          16768  0 
firewire_core          39200  1 firewire_ohci
crc_itu_t               2240  1 firewire_core
r8169                  29128  0 
ahci                   20868  0 
i2c_i801                8752  0 
snd_hda_intel         238712  1 
ehci_hcd               31244  0 
usbvision              69288  0 
uhci_hcd               23216  0 
intel_agp              23316  0 
agpgart                32136  2 nvidia,intel_agp
vfat                   12224  0 
fat                    48636  1 vfat
reiserfs              220160  3 
ext2                   60520  1 
raid1                  22496  1 
md_mod                 73812  2 raid1
dm_snapshot            17060  0 
dm_mirror              21152  0 
dm_mod                 52384  18 dm_snapshot,dm_mirror
coretemp                7264  0 
it87                   17808  0 
hwmon_vid               3040  1 it87
i2c_isa                 4352  1 it87
sundance               22528  0 
mii                     5376  1 sundance
saa7134               121388  0 
video_buf              23620  1 saa7134
compat_ioctl32          1472  1 saa7134
ir_kbd_i2c              8816  1 saa7134
i2c_core               23840  7 nvidia,i2c_i801,usbvision,it87,i2c_isa,saa7134,ir_kbd_i2c
ir_common              34212  2 saa7134,ir_kbd_i2c
videodev               26816  2 usbvision,saa7134
v4l2_common            16832  3 usbvision,saa7134,videodev
v4l1_compat            12644  2 saa7134,videodev
snd_usb_audio          74624  2 
snd_usb_lib            15520  1 snd_usb_audio
snd_cmipci             32704  0 
gameport               15208  1 snd_cmipci
snd_pcm_oss            39456  0 
snd_mixer_oss          15584  2 snd_pcm_oss
snd_pcm                72612  5 snd_hda_intel,snd_usb_audio,snd_cmipci,snd_pcm_oss
snd_page_alloc         10248  2 snd_hda_intel,snd_pcm
snd_opl3_lib            9952  1 snd_cmipci
snd_hwdep               8964  2 snd_usb_audio,snd_opl3_lib
snd_mpu401_uart         8256  1 snd_cmipci
snd_seq_dummy           3876  0 
snd_seq_oss            29600  0 
snd_seq_midi            8320  0 
snd_seq_midi_event      7008  2 snd_seq_oss,snd_seq_midi
snd_seq                46576  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              21284  3 snd_pcm,snd_opl3_lib,snd_seq
snd_rawmidi            22848  3 snd_usb_lib,snd_mpu401_uart,snd_seq_midi
snd_seq_device          7884  6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd                    48548  17 snd_hda_intel,snd_usb_audio,snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_seq,snd_timer,snd_rawmidi,snd_seq_device
soundcore               7680  2 snd
sr_mod                 16580  0 
sata_via               11588  0 
sd_mod                 27328  6 
ata_piix               13476  4 
ide_cd                 36608  0 
cdrom                  33056  2 sr_mod,ide_cd
usbhid                 26048  0 
usbmouse                5440  0 
usbcore               125960  8 ehci_hcd,usbvision,uhci_hcd,snd_usb_audio,snd_usb_lib,usbhid,usbmouse
hid                    25408  1 usbhid
sg                     32796  0 
nls_koi8_r              5376  0 
nls_cp866               5376  0 
ext3                  121704  5 
jbd                    55528  1 ext3
mbcache                 8516  2 ext2,ext3
ide_disk               16736  11 
ata_generic             7716  0 
libata                115760  4 ahci,sata_via,ata_piix,ata_generic
scsi_mod              137036  4 sr_mod,sd_mod,sg,libata
generic                 4964  0 [permanent]
jmicron                 3744  0 [permanent]
ide_core              114244  4 ide_cd,ide_disk,generic,jmicron
shpchp                 31316  0 
pci_hotplug            29408  1 shpchp
evdev                   9472  0 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Unknown device [8086:29c0] (rev 02)
	Subsystem: Giga-byte Technology Unknown device [1458:5000]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: f4000000-f7ffffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
	Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:2937] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at e000 [size=32]
	Capabilities: <access denied>

00:1a.1 USB Controller [0c03]: Intel Corporation Unknown device [8086:2938] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 4: I/O ports at e100 [size=32]
	Capabilities: <access denied>

00:1a.2 USB Controller [0c03]: Intel Corporation Unknown device [8086:2939] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 21
	Region 4: I/O ports at e500 [size=32]
	Capabilities: <access denied>

00:1a.7 USB Controller [0c03]: Intel Corporation Unknown device [8086:293c] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 21
	Region 0: Memory at fa205000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation Unknown device [8086:293e] (rev 02)
	Subsystem: Giga-byte Technology Unknown device [1458:a002]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fa200000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>

00:1c.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:2940] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: <access denied>

00:1c.4 PCI bridge [0604]: Intel Corporation Unknown device [8086:2948] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fa000000-fa0fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: <access denied>

00:1c.5 PCI bridge [0604]: Intel Corporation Unknown device [8086:294a] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: f8000000-f9ffffff
	Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: <access denied>

00:1d.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:2934] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 22
	Region 4: I/O ports at e200 [size=32]
	Capabilities: <access denied>

00:1d.1 USB Controller [0c03]: Intel Corporation Unknown device [8086:2935] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 18
	Region 4: I/O ports at e300 [size=32]
	Capabilities: <access denied>

00:1d.2 USB Controller [0c03]: Intel Corporation Unknown device [8086:2936] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 21
	Region 4: I/O ports at e400 [size=32]
	Capabilities: <access denied>

00:1d.7 USB Controller [0c03]: Intel Corporation Unknown device [8086:293a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:5006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at fa204000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fa100000-fa1fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation Unknown device [8086:2916] (rev 02)
	Subsystem: Giga-byte Technology Unknown device [1458:5001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation Unknown device [8086:2920] (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Giga-byte Technology Unknown device [1458:b002]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 18
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at f000 [size=16]
	Region 5: I/O ports at fc00 [size=16]
	Capabilities: <access denied>

00:1f.3 SMBus [0c05]: Intel Corporation Unknown device [8086:2930] (rev 02)
	Subsystem: Giga-byte Technology Unknown device [1458:5001]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin C routed to IRQ 21
	Region 0: Memory at fa206000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0500 [size=32]

00:1f.5 IDE interface [0101]: Intel Corporation Unknown device [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
	Subsystem: Giga-byte Technology Unknown device [1458:b002]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 18
	Region 0: I/O ports at e700 [size=8]
	Region 1: I/O ports at e800 [size=4]
	Region 2: I/O ports at e900 [size=8]
	Region 3: I/O ports at ea00 [size=4]
	Region 4: I/O ports at eb00 [size=16]
	Region 5: I/O ports at ec00 [size=16]
	Capabilities: <access denied>

01:00.0 VGA compatible controller [0300]: nVidia Corporation Unknown device [10de:0611] (rev a2) (prog-if 00 [VGA])
	Subsystem: LeadTek Research Inc. Unknown device [107d:2ab0]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at a000 [size=128]
	[virtual] Expansion ROM at f7000000 [disabled] [size=128K]
	Capabilities: <access denied>

03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Giga-byte Technology Unknown device [1458:b000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 5: Memory at fa000000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>

03:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
	Subsystem: Giga-byte Technology Unknown device [1458:b000]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at b000 [size=8]
	Region 1: I/O ports at b100 [size=4]
	Region 2: I/O ports at b200 [size=8]
	Region 3: I/O ports at b300 [size=4]
	Region 4: I/O ports at b400 [size=16]
	Capabilities: <access denied>

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
	Subsystem: Giga-byte Technology Unknown device [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at c000 [size=256]
	Region 2: Memory at f9000000 (64-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 80000000 [disabled] [size=64K]
	Capabilities: <access denied>

05:00.0 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] (rev 50)
	Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at d000 [size=16]
	Region 1: I/O ports at d100 [size=16]
	Region 2: I/O ports at d200 [size=16]
	Region 3: I/O ports at d300 [size=16]
	Region 4: I/O ports at d400 [size=32]
	Region 5: I/O ports at d500 [size=256]
	Capabilities: <access denied>

05:06.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology Unknown device [1458:1000]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at fa104000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at fa100000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>



-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (600, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.22-4-686
Locale: LANG=ru_RU.KOI8-R, LC_CTYPE=ru_RU.KOI8-R (charmap=KOI8-R)

Versions of packages linux-image-2.6.22-4-686 depends on:
ii  module-init-tools             3.3-pre4-2 tools for managing Linux kernel mo
ii  yaird [linux-initramfs-tool]  0.0.12-18  Yet Another mkInitRD

Versions of packages linux-image-2.6.22-4-686 recommends:
pn  libc6-i686                    <none>     (no description available)

-- debconf information:
  linux-image-2.6.22-4-686/preinst/abort-install-2.6.22-4-686:
  linux-image-2.6.22-4-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.22-4-686/preinst/failed-to-move-modules-2.6.22-4-686:
  linux-image-2.6.22-4-686/preinst/elilo-initrd-2.6.22-4-686: true
  linux-image-2.6.22-4-686/postinst/kimage-is-a-directory:
  linux-image-2.6.22-4-686/postinst/old-system-map-link-2.6.22-4-686: true
  linux-image-2.6.22-4-686/postinst/bootloader-test-error-2.6.22-4-686:
  linux-image-2.6.22-4-686/postinst/create-kimage-link-2.6.22-4-686: true
  linux-image-2.6.22-4-686/postinst/depmod-error-2.6.22-4-686: false
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.22-4-686/preinst/bootloader-initrd-2.6.22-4-686: true
  linux-image-2.6.22-4-686/prerm/would-invalidate-boot-loader-2.6.22-4-686: true
  linux-image-2.6.22-4-686/preinst/abort-overwrite-2.6.22-4-686:
  linux-image-2.6.22-4-686/postinst/depmod-error-initrd-2.6.22-4-686: false
  linux-image-2.6.22-4-686/preinst/already-running-this-2.6.22-4-686:
  linux-image-2.6.22-4-686/prerm/removing-running-kernel-2.6.22-4-686: true
  linux-image-2.6.22-4-686/postinst/old-dir-initrd-link-2.6.22-4-686: true
  linux-image-2.6.22-4-686/preinst/lilo-initrd-2.6.22-4-686: true
  linux-image-2.6.22-4-686/preinst/initrd-2.6.22-4-686:
  linux-image-2.6.22-4-686/postinst/old-initrd-link-2.6.22-4-686: true
  linux-image-2.6.22-4-686/preinst/overwriting-modules-2.6.22-4-686: true
  linux-image-2.6.22-4-686/postinst/bootloader-error-2.6.22-4-686:



--- End Message ---
--- Begin Message ---
On Wed, Sep 10, 2008 at 12:24:30AM +1200, Dmitry Maksyoma wrote:
> The problem is resolved, /dev/sdb2 pointed to nowhere.

Closing.

Bastian

-- 
	"That unit is a woman."
	"A mass of conflicting impulses."
		-- Spock and Nomad, "The Changeling", stardate 3541.9


--- End Message ---

Reply to: