Bug#500385: linux-image-2.6.26-1-686: usbcore.ko to many enumeration errors during bootup and first time module load
Package: linux-image-2.6.26-1-686
Version: 2.6.26-5
Severity: normal
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
During bootup evdev or the initramfs loads the usbcore.ko module to initialize usb devices, this should go fine without strange errors like enumeration problems or connecting problems. I almost always get errors like "unable to enumerate usbdevice on port x" This especialy happens with external usbdevices connected to the main hup or an external hup. I think these device just need some more time to enumerate and the usbcore is to quick with is justments? The device do all work, so its not that the devices are not working but its about the output that is showed to the users. I would like to keep the bootlogs as logical and correct as possible. Thanks in advance.
- -- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-5) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 16:46:13 UTC 2008
** Command line:
root=/dev/sda1 ro quiet noresume pci=nommconf SELINUX_INIT=NO
** Tainted: P (1)
** Kernel log:
[ 13.197510] ehci_hcd 0000:00:1d.7: debug port 1
[ 13.197524] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 13.197544] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 13.244063] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 13.244279] usb usb5: configuration #1 chosen from 1 choice
[ 13.244358] hub 5-0:1.0: USB hub found
[ 13.244379] hub 5-0:1.0: 8 ports detected
[ 13.348349] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.348361] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.348369] usb usb5: Product: EHCI Host Controller
[ 13.348375] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 13.348381] usb usb5: SerialNumber: 0000:00:1d.7
[ 13.349360] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 13.640068] usb 1-2: device not accepting address 2, error -71
[ 13.696117] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 14.064092] usb 5-2: new high speed USB device using ehci_hcd and address 2
[ 14.201633] usb 5-2: configuration #1 chosen from 1 choice
[ 14.202194] usb 5-2: New USB device found, idVendor=2040, idProduct=6502
[ 14.202204] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 14.202212] usb 5-2: Product: WinTV HVR-900
[ 14.202217] usb 5-2: SerialNumber: 4030600678
[ 14.440108] usb 5-3: new high speed USB device using ehci_hcd and address 3
[ 14.573637] usb 5-3: configuration #1 chosen from 1 choice
[ 14.573951] hub 5-3:1.0: USB hub found
[ 14.574235] hub 5-3:1.0: 4 ports detected
[ 14.680339] usb 5-3: New USB device found, idVendor=05e3, idProduct=0608
[ 14.680353] usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 14.680361] usb 5-3: Product: USB2.0 Hub
[ 14.880378] usb 5-3.1: new low speed USB device using ehci_hcd and address 4
[ 14.996769] usb 5-3.1: configuration #1 chosen from 1 choice
[ 14.998281] usb 5-3.1: New USB device found, idVendor=046d, idProduct=c30e
[ 14.998290] usb 5-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 14.998301] usb 5-3.1: Product: HID compliant keyboard
[ 14.998307] usb 5-3.1: Manufacturer: Logitech
[ 15.196376] usb 5-3.2: new full speed USB device using ehci_hcd and address 5
[ 15.298286] usb 5-3.2: configuration #1 chosen from 1 choice
[ 15.301387] usb 5-3.2: New USB device found, idVendor=04e6, idProduct=5115
[ 15.301399] usb 5-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 15.301407] usb 5-3.2: Product: SCR33x USB Smart Card Reader
[ 15.301414] usb 5-3.2: Manufacturer: SCM Microsystems Inc.
[ 15.301420] usb 5-3.2: SerialNumber: 21120618201041
[ 15.500372] usb 5-3.3: new low speed USB device using ehci_hcd and address 6
[ 15.598515] usb 5-3.3: configuration #1 chosen from 1 choice
[ 15.599173] usb 5-3.3: New USB device found, idVendor=046d, idProduct=c043
[ 15.599182] usb 5-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 15.599190] usb 5-3.3: Product: USB-PS/2 Optical Mouse
[ 15.599197] usb 5-3.3: Manufacturer: Logitech
[ 16.251479] Linux video capture interface: v2.00
[ 16.323356] em28xx v4l2 driver version 0.0.1 loaded
[ 16.323489] em28xx: new video device (2040:6502): interface 0, class 255
[ 16.323496] em28xx: device is attached to a USB 2.0 bus
[ 16.323505] em28xx #0: Alternate settings: 8
[ 16.323511] em28xx #0: Alternate setting 0, max size= 0
[ 16.323517] em28xx #0: Alternate setting 1, max size= 0
[ 16.323523] em28xx #0: Alternate setting 2, max size= 1448
[ 16.323530] em28xx #0: Alternate setting 3, max size= 2048
[ 16.323536] em28xx #0: Alternate setting 4, max size= 2304
[ 16.323545] em28xx #0: Alternate setting 5, max size= 2580
[ 16.323551] em28xx #0: Alternate setting 6, max size= 2892
[ 16.323557] em28xx #0: Alternate setting 7, max size= 3072
[ 16.985534] attach_inform: tvp5150 detected.
[ 17.048604] tvp5150 1-005c: tvp5150am1 detected.
[ 18.658852] successfully attached tuner
[ 18.662881] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[ 18.681221] em28xx #0: V4L2 device registered as /dev/video0
[ 18.681399] input: em2880/em2870 remote control as /class/input/input8
[ 18.716120] em28xx-input.c: remote control handler attached
[ 18.716132] em28xx #0: Found Hauppauge WinTV HVR (B2C0)
[ 18.716257] usbcore: registered new interface driver em28xx
[ 18.716326] usbcore: registered new interface driver hiddev
[ 18.726957] input: Logitech HID compliant keyboard as /class/input/input9
[ 18.752186] input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.7-3.1
[ 18.771262] input: Logitech HID compliant keyboard as /class/input/input10
[ 18.800190] input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.7-3.1
[ 18.804670] input: Logitech USB-PS/2 Optical Mouse as /class/input/input11
[ 18.832232] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-3.3
[ 18.832288] usbcore: registered new interface driver usbhid
[ 18.832307] usbhid: v2.6:USB HID core driver
[ 18.917507] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 18.917519] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 18.917672] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 19.231029] em2880-dvb.c: DVB Init
[ 20.482229] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 20.633712] fuse init (API version 7.9)
[ 21.460246] DVB: registering new adapter (em2880 DVB-T)
[ 21.460261] DVB: registering frontend 0 (Micronas DRX3973D DVB-T)...
[ 21.460956] Em28xx: Initialized (Em2880 DVB Extension) extension
[ 21.528239] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 22.836419] Bluetooth: Core ver 2.11
[ 22.838893] NET: Registered protocol family 31
[ 22.838902] Bluetooth: HCI device and connection manager initialized
[ 22.838911] Bluetooth: HCI socket layer initialized
[ 22.926240] Bluetooth: L2CAP ver 2.9
[ 22.926249] Bluetooth: L2CAP socket layer initialized
[ 22.949112] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 23.028348] Bluetooth: RFCOMM socket layer initialized
[ 23.028377] Bluetooth: RFCOMM TTY layer initialized
[ 23.028382] Bluetooth: RFCOMM ver 1.8
[ 73.426602] em28xx_dvb_init
[ 203.401124] em28xx_dvb_init
** Loaded modules:
Module Size Used by
rfcomm 28272 2
hidp 12000 2
l2cap 17248 14 rfcomm,hidp
bluetooth 44900 5 rfcomm,hidp,l2cap
fuse 42908 3
p4_clockmod 4036 0
speedstep_lib 4516 1 p4_clockmod
freq_table 4224 1 p4_clockmod
drx3973d 59504 1
em28xx_dvb 13636 4
dvb_core 66528 1 em28xx_dvb
em28xx_audio 7044 0
tuner_xc3028 4864 1
tvp5150 15856 0
usbhid 35904 0
hid 33184 2 hidp,usbhid
ff_memless 4392 1 usbhid
em28xx 358592 2 em28xx_dvb,em28xx_audio
videodev 27520 1 em28xx
v4l1_compat 12260 2 em28xx,videodev
joydev 8480 0
wlan_scan_sta 11264 0
snd_pcsp 8576 0
video 16400 0
output 2912 1 video
battery 10180 0
ac 4196 0
psmouse 32336 0
eeepc_laptop 7440 0
button 6064 0
i2c_i801 7920 0
serio_raw 4740 0
i2c_core 19828 5 drx3973d,tuner_xc3028,tvp5150,em28xx,i2c_i801
ehci_hcd 28428 0
uhci_hcd 18672 0
iTCO_wdt 9508 0
ath_rate_sample 11072 1
usbcore 118160 8 em28xx_dvb,em28xx_audio,usbhid,em28xx,ehci_hcd,uhci_hcd
ath_pci 202552 0
wlan 193776 4 wlan_scan_sta,ath_rate_sample,ath_pci
snd_hda_intel 324248 3
ath_hal 300736 3 ath_rate_sample,ath_pci
snd_pcm 62628 4 em28xx_audio,snd_pcsp,snd_hda_intel
snd_timer 17800 2 snd_pcm
intel_agp 22300 1
snd 45604 9 em28xx_audio,snd_pcsp,snd_hda_intel,snd_pcm,snd_timer
atl2 22744 0
agpgart 28776 2 intel_agp
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
evdev 8000 10
ext2 54344 1
mbcache 7108 1 ext2
sd_mod 22200 2
thermal 15228 0
processor 32576 2 thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
ata_generic 4676 0
ahci 23176 0
ata_piix 14180 1
libata 140416 3 ata_generic,ahci,ata_piix
scsi_mod 129356 2 sd_mod,libata
dock 8272 1 libata
ide_pci_generic 3908 0 [permanent]
ide_core 92628 1 ide_pci_generic
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ahci, ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Device [1a3b:1026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath_pci
Kernel modules: ath5k, ath_pci
03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter [1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 220
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fbfa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl2
Kernel modules: atl2
- -- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92l tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
- -- debconf information excluded
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iJwEAQECAAYFAkjeabYACgkQ1WclBW9j5Hn4qAP/RsXaVecKBYr7qV3v8HPnkMOz
LOstIU5/JqS21YS3O85zMfRyD93SsN2xVlSmYAfJhEEJ3PybK7ApLgfN9h50nZab
a8y784faCY7uXN5I8F8zHGr7B9kBkKR28X11zomBeeySNPus9n7HU7sQZKdtCFZw
XjMqk5eXfFyvAcDwEjQ=
=Dmgp
-----END PGP SIGNATURE-----
Reply to: