Bug#499424: [linux-image-2.6.26-1-amd64] No sound for Intel 82801H (ICH8 Family) HD Audio Controller (rev 02)
Just found this page: http://wiki.debian.org/DebianKernelReportingBugs
So here is more information:
$ dpkg -l | grep "$(uname -r)"
ii linux-image-2.6.26-1-amd64 2.6.26-5
Linux 2.6.26 image on AMD64
I've attached the output of dmesg and "lspci -nn"
I also tried the kernel from trunk, this doesn't help either.
$ dpkg -l | grep "$(uname -r)"
ii linux-image-2.6.27-rc6-amd64
2.6.27~rc6-1~experimental.1~snapshot.12226 Linux 2.6.27-rc6 image on AMD64
So I guess I have to report this bug upstream!?
Greets
Jens
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-5) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 15:31:12 UTC 2008
[ 0.000000] Command line: root=/dev/sda7 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f66d800 (usable)
[ 0.000000] BIOS-e820: 000000007f66d800 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 521837) 1 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FBC60, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 7F66F200, 0064 (r1 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: FACP 7F66F09C, 00F4 (r4 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: DSDT 7F66F800, 5495 (r2 INT430 SYSFexxx 1001 INTL 20050624)
[ 0.000000] ACPI: FACS 7F67E000, 0040
[ 0.000000] ACPI: HPET 7F66F300, 0038 (r1 DELL M08 1 ASL 61)
[ 0.000000] ACPI: APIC 7F66F400, 0068 (r1 DELL M08 27D8030A ASL 47)
[ 0.000000] ACPI: MCFG 7F66F3C0, 003E (r16 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: SLIC 7F66F49C, 0176 (r1 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: OSFR 7F66EA00, 002C (r1 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: BOOT 7F66EFC0, 0028 (r1 DELL M08 27D8030A ASL 61)
[ 0.000000] ACPI: SSDT 7F66DA44, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f66d000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 521837) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007f66d000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff]
[ 0.000000] bootmap [0000000000011000 - 0000000000020ecf] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [3799e000-37fef5b6] RAMDISK
[ 0.000000] early res: 4 [9f000-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 521837
[ 0.000000] On node 0 totalpages: 521740
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1243 pages reserved
[ 0.000000] DMA zone: 2700 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7079 pages used for memmap
[ 0.000000] DMA32 zone: 510662 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513362
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda7 ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 1828.748 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2046980k/2087348k available (2225k kernel code, 39980k reserved, 1079k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083861] Calibrating delay using timer specific routine.. 3662.10 BogoMIPS (lpj=7324215)
[ 0.083908] Security Framework initialized
[ 0.083915] SELinux: Disabled at boot.
[ 0.083919] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 2048K
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] CPU0: Thermal monitoring enabled (TM2)
[ 0.084005] using mwait in idle threads.
[ 0.084005] ACPI: Core revision 20080321
[ 0.136290] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
[ 0.136295] Using local APIC timer interrupts.
[ 0.144009] APIC timer calibration result 10390626
[ 0.144009] Detected 10.390 MHz APIC timer.
[ 0.144009] Booting processor 1/1 ip 6000
[ 0.152009] Initializing CPU#1
[ 0.152009] Calibrating delay using timer specific routine.. 3657.51 BogoMIPS (lpj=7315026)
[ 0.152009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.152009] CPU: L2 cache: 2048K
[ 0.152009] CPU 1/1 -> Node 0
[ 0.152009] CPU: Physical Processor ID: 0
[ 0.152009] CPU: Processor Core ID: 1
[ 0.152009] CPU1: Thermal monitoring enabled (TM2)
[ 0.232014] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
[ 0.232014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.236014] Brought up 2 CPUs
[ 0.236014] Total of 2 processors activated (7319.62 BogoMIPS).
[ 0.236014] CPU0 attaching sched-domain:
[ 0.236014] domain 0: span 0-1
[ 0.236014] groups: 0 1
[ 0.236014] domain 1: span 0-1
[ 0.236014] groups: 0-1
[ 0.236014] CPU1 attaching sched-domain:
[ 0.236014] domain 0: span 0-1
[ 0.236014] groups: 1 0
[ 0.236014] domain 1: span 0-1
[ 0.236014] groups: 0-1
[ 0.236014] net_namespace: 1224 bytes
[ 0.236014] Booting paravirtualized kernel on bare hardware
[ 0.236014] NET: Registered protocol family 16
[ 0.236014] ACPI: bus type pci registered
[ 0.236014] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.236014] PCI: MCFG area at f8000000 reserved in E820
[ 0.239578] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.239581] PCI: Using configuration type 1 for base access
[ 0.240015] ACPI: EC: Look up EC in DSDT
[ 0.240015] ACPI: BIOS _OSI(Linux) query ignored
[ 0.240015] ACPI: DMI System Vendor: Dell Inc.
[ 0.240015] ACPI: DMI Product Name: Inspiron 1525
[ 0.240015] ACPI: DMI Product Version:
[ 0.240015] ACPI: DMI Board Name: 0U990C
[ 0.240015] ACPI: DMI BIOS Vendor: Dell Inc.
[ 0.240015] ACPI: DMI BIOS Date: 03/10/2008
[ 0.240015] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.240015] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.270942] ACPI: Interpreter enabled
[ 0.270946] ACPI: (supports S0 S3 S4 S5)
[ 0.270963] ACPI: Using IOAPIC for interrupt routing
[ 0.328953] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.328953] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.328953] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.328953] PCI: Transparent bridge - 0000:00:1e.0
[ 0.328953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.328953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.328953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.328953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.329130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.345223] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.345223] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.345223] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
[ 0.345223] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[ 0.345223] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.345223] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.345223] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.345363] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.349224] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.349224] pnp: PnP ACPI init
[ 0.349224] ACPI: bus type pnp registered
[ 0.349224] pnp 00:00: parse allocated resources
[ 0.369225] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.369225] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.369225] pnp 00:01: parse allocated resources
[ 0.369225] pnp 00:01: add io 0x4e-0x4f flags 0x1
[ 0.369225] pnp 00:01: add io 0x68-0x6f flags 0x1
[ 0.369225] pnp 00:01: add mem 0xff800000-0xff8fffff flags 0x1
[ 0.369225] pnp 00:01: add mem 0xffc00000-0xffcfffff flags 0x1
[ 0.369225] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.369225] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369225] pnp 00:02: parse allocated resources
[ 0.369225] pnp 00:02: add irq 12 flags 0x1
[ 0.369225] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.369225] pnp 00:03: parse allocated resources
[ 0.369225] pnp 00:03: add io 0x60-0x60 flags 0x1
[ 0.369225] pnp 00:03: add io 0x64-0x64 flags 0x1
[ 0.369225] pnp 00:03: add io 0x62-0x62 flags 0x1
[ 0.369225] pnp 00:03: add io 0x66-0x66 flags 0x1
[ 0.369225] pnp 00:03: add irq 1 flags 0x1
[ 0.369225] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.369225] pnp 00:04: parse allocated resources
[ 0.369225] pnp 00:04: add io 0x70-0x71 flags 0x1
[ 0.369225] pnp 00:04: add irq 8 flags 0x1
[ 0.369225] pnp 00:04: add io 0x72-0x77 flags 0x1
[ 0.369225] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.369225] pnp 00:05: parse allocated resources
[ 0.369225] pnp 00:05: add io 0x61-0x61 flags 0x1
[ 0.369225] pnp 00:05: add io 0x63-0x63 flags 0x1
[ 0.369225] pnp 00:05: add io 0x65-0x65 flags 0x1
[ 0.369225] pnp 00:05: add io 0x67-0x67 flags 0x1
[ 0.369225] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.369225] pnp 00:06: parse allocated resources
[ 0.369225] pnp 00:06: add io 0xc80-0xcff flags 0x1
[ 0.369225] pnp 00:06: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.369232] pnp 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.369246] pnp 00:07: parse allocated resources
[ 0.369287] pnp 00:07: add dma 4 flags 0x4
[ 0.369290] pnp 00:07: add io 0x0-0xf flags 0x1
[ 0.369292] pnp 00:07: add io 0x80-0x85 flags 0x1
[ 0.369294] pnp 00:07: add io 0x87-0x8f flags 0x1
[ 0.369296] pnp 00:07: add io 0xc0-0xdf flags 0x1
[ 0.369298] pnp 00:07: add io 0x10-0x1f flags 0x1
[ 0.369300] pnp 00:07: add io 0x90-0x91 flags 0x1
[ 0.369302] pnp 00:07: add io 0x93-0x9f flags 0x1
[ 0.373225] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.373225] pnp 00:08: parse allocated resources
[ 0.373225] pnp 00:08: add io 0xf0-0xff flags 0x1
[ 0.373225] pnp 00:08: add irq 13 flags 0x1
[ 0.373225] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.373225] pnp 00:09: parse allocated resources
[ 0.373225] pnp 00:09: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.373225] pnp 00:09: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.373225] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.373225] pnp 00:0a: parse allocated resources
[ 0.373225] pnp 00:0a: add io 0x900-0x97f flags 0x1
[ 0.373225] pnp 00:0a: add io 0x92-0x92 flags 0x1
[ 0.373225] pnp 00:0a: add io 0xb2-0xb3 flags 0x1
[ 0.373225] pnp 00:0a: add io 0x20-0x21 flags 0x1
[ 0.373225] pnp 00:0a: add io 0xa0-0xa1 flags 0x1
[ 0.373225] pnp 00:0a: add io 0x4d0-0x4d1 flags 0x1
[ 0.373225] pnp 00:0a: add io 0x1000-0x1005 flags 0x1
[ 0.373225] pnp 00:0a: add io 0x1008-0x100f flags 0x1
[ 0.373225] pnp 00:0a: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.373225] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.373225] pnp 00:0b: parse allocated resources
[ 0.373225] pnp 00:0b: add io 0xf400-0xf4fe flags 0x1
[ 0.373225] pnp 00:0b: add io 0x86-0x86 flags 0x1
[ 0.373225] pnp 00:0b: add io 0x1006-0x1007 flags 0x1
[ 0.373225] pnp 00:0b: add io 0x100a-0x1059 flags 0x1
[ 0.373225] pnp 00:0b: add io 0x1060-0x107f flags 0x1
[ 0.373225] pnp 00:0b: add io 0x1080-0x10bf flags 0x1
[ 0.373225] pnp 00:0b: add io 0x10c0-0x10df flags 0x1
[ 0.373225] pnp 00:0b: add io 0x1010-0x102f flags 0x1
[ 0.373225] pnp 00:0b: add io 0x809-0x809 flags 0x1
[ 0.373225] pnp 00:0b: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.373225] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.373225] pnp 00:0c: parse allocated resources
[ 0.398253] pnp 00:0c: add mem 0x0-0x9efff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0x9f000-0x9ffff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0xc0000-0xcffff flags 0x0
[ 0.398253] pnp 00:0c: add mem 0xe0000-0xfffff flags 0x0
[ 0.398253] pnp 00:0c: add mem 0x100000-0x7f66d7ff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0x7f66d800-0x7f6fffff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0x7f700000-0x7f7fffff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0x7f700000-0x7fefffff flags 0x0
[ 0.398253] pnp 00:0c: add mem 0xffe00000-0xffffffff flags 0x0
[ 0.398253] pnp 00:0c: add mem 0xffa00000-0xffbfffff flags 0x0
[ 0.398253] pnp 00:0c: add mem 0xfec00000-0xfec0ffff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0xfee00000-0xfee0ffff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0xfed20000-0xfed8ffff flags 0x0
[ 0.398253] pnp 00:0c: add mem 0xfeda0000-0xfeda3fff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0xfeda4000-0xfeda4fff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0xfeda5000-0xfeda5fff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0xfeda6000-0xfeda6fff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0xfed18000-0xfed1bfff flags 0x1
[ 0.398253] pnp 00:0c: add mem 0xf8000000-0xfbffffff flags 0x1
[ 0.398253] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.398253] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.398253] pnp: PnP ACPI: found 13 devices
[ 0.398253] ACPI: ACPI bus type pnp unregistered
[ 0.398253] usbcore: registered new interface driver usbfs
[ 0.402253] usbcore: registered new interface driver hub
[ 0.402253] usbcore: registered new device driver usb
[ 0.402253] PCI: Using ACPI for IRQ routing
[ 0.421784] PCI-GART: No AMD northbridge found.
[ 0.421791] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.421795] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.422254] ACPI: RTC can wake from S4
[ 0.433132] pnp: the driver 'system' has been registered
[ 0.433143] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved
[ 0.433147] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved
[ 0.433149] system 00:01: driver attached
[ 0.433157] system 00:06: ioport range 0xc80-0xcff could not be reserved
[ 0.433160] system 00:06: driver attached
[ 0.433168] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.433170] system 00:09: driver attached
[ 0.433176] system 00:0a: ioport range 0x900-0x97f has been reserved
[ 0.433179] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.433182] system 00:0a: ioport range 0x1000-0x1005 has been reserved
[ 0.433185] system 00:0a: ioport range 0x1008-0x100f has been reserved
[ 0.433187] system 00:0a: driver attached
[ 0.433193] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[ 0.433196] system 00:0b: ioport range 0x1006-0x1007 has been reserved
[ 0.433199] system 00:0b: ioport range 0x100a-0x1059 could not be reserved
[ 0.433202] system 00:0b: ioport range 0x1060-0x107f has been reserved
[ 0.433204] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[ 0.433207] system 00:0b: ioport range 0x10c0-0x10df has been reserved
[ 0.433210] system 00:0b: ioport range 0x1010-0x102f has been reserved
[ 0.433213] system 00:0b: ioport range 0x809-0x809 has been reserved
[ 0.433215] system 00:0b: driver attached
[ 0.433221] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[ 0.433225] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.433227] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 0.433230] system 00:0c: iomem range 0xe0000-0xfffff has been reserved
[ 0.433233] system 00:0c: iomem range 0x100000-0x7f66d7ff could not be reserved
[ 0.433237] system 00:0c: iomem range 0x7f66d800-0x7f6fffff could not be reserved
[ 0.433240] system 00:0c: iomem range 0x7f700000-0x7f7fffff could not be reserved
[ 0.433243] system 00:0c: iomem range 0x7f700000-0x7fefffff could not be reserved
[ 0.433246] system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.433249] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
[ 0.433252] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.433255] system 00:0c: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 0.433258] system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 0.433261] system 00:0c: iomem range 0xfeda0000-0xfeda3fff could not be reserved
[ 0.433265] system 00:0c: iomem range 0xfeda4000-0xfeda4fff could not be reserved
[ 0.433268] system 00:0c: iomem range 0xfeda5000-0xfeda5fff could not be reserved
[ 0.433271] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.433274] system 00:0c: iomem range 0xfed18000-0xfed1bfff could not be reserved
[ 0.433277] system 00:0c: iomem range 0xf8000000-0xfbffffff could not be reserved
[ 0.433279] system 00:0c: driver attached
[ 0.434787] PCI: Bridge: 0000:00:1c.0
[ 0.434787] IO window: d000-dfff
[ 0.434787] MEM window: 0xfe800000-0xfe8fffff
[ 0.434787] PREFETCH window: disabled.
[ 0.434787] PCI: Bridge: 0000:00:1c.1
[ 0.434787] IO window: disabled.
[ 0.434787] MEM window: 0xfe700000-0xfe7fffff
[ 0.434787] PREFETCH window: disabled.
[ 0.434787] PCI: Bridge: 0000:00:1c.4
[ 0.434787] IO window: c000-cfff
[ 0.434787] MEM window: 0xfe400000-0xfe6fffff
[ 0.434787] PREFETCH window: 0x00000000f0000000-0x00000000f01fffff
[ 0.434787] PCI: Bridge: 0000:00:1e.0
[ 0.434787] IO window: disabled.
[ 0.434787] MEM window: 0xfe300000-0xfe3fffff
[ 0.434787] PREFETCH window: disabled.
[ 0.434787] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.434787] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.434787] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.434787] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.434787] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.434787] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.434787] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.434787] NET: Registered protocol family 2
[ 0.470014] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.471795] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.471795] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.471795] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.471795] TCP reno registered
[ 0.480059] NET: Registered protocol family 1
[ 0.480176] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.507898] Switched to high resolution mode on CPU 0
[ 0.778772] it is
[ 1.094763] Freeing initrd memory: 6469k freed
[ 1.098774] Simple Boot Flag at 0x79 set to 0x1
[ 1.099257] audit: initializing netlink socket (disabled)
[ 1.099257] type=2000 audit(1221747238.092:1): initialized
[ 1.099257] Total HugeTLB memory allocated, 0
[ 1.099257] VFS: Disk quotas dquot_6.5.1
[ 1.099257] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.099257] msgmni has been set to 4010
[ 1.101275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.101278] io scheduler noop registered
[ 1.101280] io scheduler anticipatory registered
[ 1.101282] io scheduler deadline registered
[ 1.101296] io scheduler cfq registered (default)
[ 1.101308] pci 0000:00:02.0: Boot video device
[ 1.103225] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.103225] assign_interrupt_mode Found MSI capability
[ 1.103225] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.103225] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.103225] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.103225] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.103225] assign_interrupt_mode Found MSI capability
[ 1.103225] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.103225] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.103225] Allocate Port Service[0000:00:1c.1:pcie03]
[ 1.103225] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 1.103225] assign_interrupt_mode Found MSI capability
[ 1.103225] Allocate Port Service[0000:00:1c.4:pcie00]
[ 1.103225] Allocate Port Service[0000:00:1c.4:pcie02]
[ 1.103225] Allocate Port Service[0000:00:1c.4:pcie03]
[ 1.103226] hpet_resources: 0xfed00000 is busy
[ 1.103226] Linux agpgart interface v0.103
[ 1.103226] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.103478] pnp: the driver 'serial' has been registered
[ 1.104973] brd: module loaded
[ 1.105040] input: Macintosh mouse button emulation as /class/input/input0
[ 1.105129] pnp: the driver 'i8042 kbd' has been registered
[ 1.105140] i8042 kbd 00:03: driver attached
[ 1.105174] pnp: the driver 'i8042 aux' has been registered
[ 1.105186] i8042 aux 00:02: driver attached
[ 1.105222] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.124220] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.137237] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.137242] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.137245] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.137248] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.137250] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.163217] mice: PS/2 mouse device common for all mice
[ 1.163217] pnp: the driver 'rtc_cmos' has been registered
[ 1.163217] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.163217] rtc0: alarms up to one month, y3k
[ 1.163217] rtc_cmos 00:04: driver attached
[ 1.163217] cpuidle: using governor ladder
[ 1.163217] cpuidle: using governor menu
[ 1.163217] No iBFT detected.
[ 1.163217] TCP cubic registered
[ 1.163217] NET: Registered protocol family 17
[ 1.163217] registered taskstats version 1
[ 1.163217] rtc_cmos 00:04: setting system clock to 2008-09-18 14:13:58 UTC (1221747238)
[ 1.163217] Freeing unused kernel memory: 392k freed
[ 1.192067] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.238345] ACPI: SSDT 7F66E57A, 0202 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 1.238345] ACPI: SSDT 7F66DF10, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 1.238449] Monitor-Mwait will be used to enter C-1 state
[ 1.238452] Monitor-Mwait will be used to enter C-2 state
[ 1.238455] Monitor-Mwait will be used to enter C-3 state
[ 1.242345] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.242345] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.242345] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.242345] ACPI: SSDT 7F66E77C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 1.242674] ACPI: SSDT 7F66E4F5, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 1.244960] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.244999] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.245003] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.242674] Marking TSC unstable due to TSC halts in idle
[ 1.245651] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.245651] ACPI: Thermal Zone [THM] (54 C)
[ 1.613222] USB Universal Host Controller Interface driver v3.0
[ 1.613222] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.613222] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 1.613222] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.613222] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.613222] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 1.613222] usb usb1: configuration #1 chosen from 1 choice
[ 1.613222] hub 1-0:1.0: USB hub found
[ 1.613222] hub 1-0:1.0: 2 ports detected
[ 1.710919] Uniform Multi-Platform E-IDE driver
[ 1.710919] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.719066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.719069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.719072] usb usb1: Product: UHCI Host Controller
[ 1.719074] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 1.719076] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.722917] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 1.722917] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1.722917] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.722917] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.722917] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 1.722917] usb usb2: configuration #1 chosen from 1 choice
[ 1.722917] hub 2-0:1.0: USB hub found
[ 1.722917] hub 2-0:1.0: 2 ports detected
[ 1.750126] No dock devices found.
[ 1.754116] SCSI subsystem initialized
[ 1.761332] libata version 3.00 loaded.
[ 1.786127] sdhci: Secure Digital Host Controller Interface driver
[ 1.786127] sdhci: Copyright(c) Pierre Ossman
[ 1.830357] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.830357] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.830357] usb usb2: Product: UHCI Host Controller
[ 1.830357] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 1.830357] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.830357] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
[ 1.830377] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1.830381] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.830435] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 1.834518] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.834518] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 1.834518] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.846809] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.846913] usb usb3: configuration #1 chosen from 1 choice
[ 1.846965] hub 3-0:1.0: USB hub found
[ 1.846975] hub 3-0:1.0: 4 ports detected
[ 1.950594] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.950600] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.950605] usb usb3: Product: EHCI Host Controller
[ 1.950608] usb usb3: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 1.950612] usb usb3: SerialNumber: 0000:00:1a.7
[ 1.950594] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.950594] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.950594] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.950594] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.950594] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 1.950594] usb usb4: configuration #1 chosen from 1 choice
[ 1.950594] hub 4-0:1.0: USB hub found
[ 1.950594] hub 4-0:1.0: 2 ports detected
[ 2.055416] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.055416] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.055416] usb usb4: Product: UHCI Host Controller
[ 2.055416] usb usb4: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 2.055416] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.055416] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 2.055416] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.055416] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.055416] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 2.055416] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 2.055416] usb usb5: configuration #1 chosen from 1 choice
[ 2.055416] hub 5-0:1.0: USB hub found
[ 2.055416] hub 5-0:1.0: 2 ports detected
[ 2.080001] Clocksource tsc unstable (delta = -241866325 ns)
[ 2.159418] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.159418] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.159418] usb usb5: Product: UHCI Host Controller
[ 2.159418] usb usb5: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 2.159418] usb usb5: SerialNumber: 0000:00:1d.1
[ 2.159418] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 2.159418] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.159418] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.159418] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 2.159418] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 2.159418] usb usb6: configuration #1 chosen from 1 choice
[ 2.159418] hub 6-0:1.0: USB hub found
[ 2.159418] hub 6-0:1.0: 2 ports detected
[ 2.260988] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.260994] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.260998] usb usb6: Product: UHCI Host Controller
[ 2.261002] usb usb6: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 2.261006] usb usb6: SerialNumber: 0000:00:1d.2
[ 2.263418] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 2.263418] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.263418] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.263418] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 2.266515] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.266515] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 2.266515] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 2.282748] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.282848] usb usb7: configuration #1 chosen from 1 choice
[ 2.282896] hub 7-0:1.0: USB hub found
[ 2.282906] hub 7-0:1.0: 6 ports detected
[ 2.387463] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.387469] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.387474] usb usb7: Product: EHCI Host Controller
[ 2.387477] usb usb7: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 2.387481] usb usb7: SerialNumber: 0000:00:1d.7
[ 2.390719] ahci 0000:00:1f.2: version 3.0
[ 2.390719] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.390719] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 2.390719] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 2.390719] sky2 0000:09:00.0: v1.21 addr 0xfe8fc000 irq 16 Yukon-FE+ (0xb8) rev 0
[ 2.390719] sky2 eth0: addr 00:1d:09:46:af:94
[ 3.393929] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 3.393937] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 3.393946] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.396915] scsi0 : ahci
[ 3.396915] scsi1 : ahci
[ 3.396915] scsi2 : ahci
[ 3.396959] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 1276
[ 3.396961] ata2: DUMMY
[ 3.396964] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 1276
[ 3.523519] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 3.676782] usb 5-1: configuration #1 chosen from 1 choice
[ 3.681799] usb 5-1: New USB device found, idVendor=046a, idProduct=0011
[ 3.681799] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.715835] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.716052] ata1.00: ATA-7: ST9160821AS, 3.CDE, max UDMA/133
[ 3.716058] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 3.717735] ata1.00: configured for UDMA/133
[ 3.919822] usb 5-2: new low speed USB device using uhci_hcd and address 3
[ 4.034086] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.035229] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.CD PQ: 0 ANSI: 5
[ 4.037130] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.091473] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.095474] ICH8M: IDE controller (0x8086:0x2850 rev 0x02) at PCI slot 0000:00:1f.1
[ 4.095474] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.095474] ICH8M: not 100% native mode: will probe irqs later
[ 4.095474] ICH8M: IDE port disabled
[ 4.095474] ide0: BM-DMA at 0x6fa0-0x6fa7
[ 4.095474] Probing IDE interface ide0...
[ 4.098398] sdhci: SDHCI controller found at 0000:02:09.1 [1180:0822] (rev 22)
[ 4.098425] ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 18 (level, low) -> IRQ 18
[ 4.101492] mmc0: SDHCI at 0xfe3ff500 irq 18 DMA
[ 4.112022] usb 5-2: configuration #1 chosen from 1 choice
[ 4.114399] usb 5-2: New USB device found, idVendor=046d, idProduct=c050
[ 4.114399] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.114399] usb 5-2: Product: USB-PS/2 Optical Mouse
[ 4.114399] usb 5-2: Manufacturer: Logitech
[ 4.130885] Driver 'sd' needs updating - please use bus_type methods
[ 4.130885] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.130885] sd 0:0:0:0: [sda] Write Protect is off
[ 4.130885] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.130885] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.130885] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.130885] sd 0:0:0:0: [sda] Write Protect is off
[ 4.130885] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.130885] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.130885] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 4.195705] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.354007] usb 6-2: new full speed USB device using uhci_hcd and address 2
[ 4.531266] usb 6-2: configuration #1 chosen from 1 choice
[ 4.535455] hub 6-2:1.0: USB hub found
[ 4.540020] hub 6-2:1.0: 3 ports detected
[ 4.649323] usb 6-2: New USB device found, idVendor=0a5c, idProduct=4500
[ 4.649329] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.649333] usb 6-2: Product: BCM2045B2
[ 4.649337] usb 6-2: Manufacturer: Broadcom
[ 4.836494] hda: HL-DT-ST DVD+/-RW GSA-T21N, ATAPI CD/DVD-ROM drive
[ 4.853429] usb 6-2.1: new full speed USB device using uhci_hcd and address 3
[ 4.978293] usb 6-2.1: configuration #1 chosen from 1 choice
[ 4.981106] usb 6-2.1: New USB device found, idVendor=413c, idProduct=8126
[ 4.981109] usb 6-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.981111] usb 6-2.1: Product: BCM2045
[ 4.981113] usb 6-2.1: Manufacturer: Broadcom Corp
[ 5.173636] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.174433] hda: UDMA/33 mode selected
[ 5.174871] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.186572] usb 6-2.2: new full speed USB device using uhci_hcd and address 4
[ 5.198256] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 5.198256] Uniform CD-ROM driver Revision: 3.20
[ 5.317526] usb 6-2.2: configuration #1 chosen from 1 choice
[ 5.319348] usb 6-2.2: New USB device found, idVendor=0a5c, idProduct=4502
[ 5.319351] usb 6-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 5.319354] usb 6-2.2: Manufacturer: Broadcom Corp
[ 5.376956] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc00034824c70]
[ 5.523438] usb 6-2.3: new full speed USB device using uhci_hcd and address 5
[ 5.651858] usb 6-2.3: configuration #1 chosen from 1 choice
[ 5.654293] usb 6-2.3: New USB device found, idVendor=0a5c, idProduct=4503
[ 5.654296] usb 6-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 5.654299] usb 6-2.3: Manufacturer: Broadcom Corp
[ 5.656193] usbcore: registered new interface driver hiddev
[ 5.673165] input: HID 046a:0011 as /class/input/input2
[ 5.695958] input,hidraw0: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:1d.1-1
[ 5.708803] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
[ 5.726471] input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
[ 5.730160] input: Broadcom Corp as /class/input/input4
[ 5.754082] input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2
[ 5.760621] input: Broadcom Corp as /class/input/input5
[ 5.783121] input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3
[ 5.783152] usbcore: registered new interface driver usbhid
[ 5.783157] usbhid: v2.6:USB HID core driver
[ 5.855965] PM: Starting manual resume from disk
[ 5.928323] kjournald starting. Commit interval 5 seconds
[ 5.928323] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.574795] udevd version 125 started
[ 19.252950] agpgart: Detected an Intel 965GM Chipset.
[ 19.252950] agpgart: Detected 7676K stolen memory.
[ 19.266334] agpgart: AGP aperture is 256M @ 0xe0000000
[ 19.307306] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 19.362554] ACPI: Battery Slot [BAT0] (battery present)
[ 19.401873] input: Lid Switch as /class/input/input6
[ 19.513150] ACPI: Lid Switch [LID]
[ 19.513210] input: Power Button (CM) as /class/input/input7
[ 19.576845] ACPI: Power Button (CM) [PBTN]
[ 19.576906] input: Sleep Button (CM) as /class/input/input8
[ 19.640268] ACPI: Sleep Button (CM) [SBTN]
[ 19.640422] ACPI: WMI: Mapper loaded
[ 19.716896] ACPI: AC Adapter [AC] (on-line)
[ 19.977935] ACPI: device:31 is registered as cooling_device2
[ 19.978364] input: Video Bus as /class/input/input9
[ 20.042735] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 20.042894] input: Video Bus as /class/input/input10
[ 20.076844] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 20.183173] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 20.183173] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 20.183173] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 20.293926] Bluetooth: Core ver 2.11
[ 20.293926] NET: Registered protocol family 31
[ 20.293926] Bluetooth: HCI device and connection manager initialized
[ 20.293926] Bluetooth: HCI socket layer initialized
[ 20.384896] input: PC Speaker as /class/input/input11
[ 20.457880] Bluetooth: HCI USB driver ver 2.9
[ 20.458416] usbcore: registered new interface driver hci_usb
[ 20.550697] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 20.778250] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 20.778250] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 20.778250] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 20.778250] PCI: Setting latency timer of device 0000:0b:00.0 to 64
[ 20.778250] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 20.853933] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 20.854678] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 20.854678] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 20.854707] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 20.938388] input: PS/2 Mouse as /class/input/input12
[ 20.970303] ACPI: PCI interrupt for device 0000:0b:00.0 disabled
[ 21.008739] input: AlpsPS/2 ALPS GlidePoint as /class/input/input13
[ 21.101749] Error: Driver 'pcspkr' is already registered, aborting...
[ 23.469406] Adding 1983988k swap on /dev/sda9. Priority:-1 extents:1 across:1983988k
[ 23.797875] EXT3 FS on sda7, internal journal
[ 23.930488] loop: module loaded
[ 24.541152] kjournald starting. Commit interval 5 seconds
[ 24.541369] EXT3 FS on sda6, internal journal
[ 24.541369] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.558760] kjournald starting. Commit interval 5 seconds
[ 24.561214] EXT3 FS on sda8, internal journal
[ 24.561214] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.108014] fuse init (API version 7.9)
[ 29.542563] sky2 eth0: enabling interface
[ 29.767617] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 29.911252] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.931202] sky2 eth0: disabling interface
[ 31.215743] sky2 eth0: enabling interface
[ 31.685999] NET: Registered protocol family 10
[ 31.685999] lo: Disabled Privacy Extensions
[ 31.686158] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.690274] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 31.980113] Bluetooth: L2CAP ver 2.9
[ 31.980113] Bluetooth: L2CAP socket layer initialized
[ 32.235389] Bluetooth: RFCOMM socket layer initialized
[ 32.235389] Bluetooth: RFCOMM TTY layer initialized
[ 32.235389] Bluetooth: RFCOMM ver 1.8
[ 33.850708] pnp: the driver 'parport_pc' has been registered
[ 33.850708] lp: driver loaded but no devices found
[ 33.866686] ppdev: user-space parallel port driver
[ 34.665992] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.665992] PM: Writing back config space on device 0000:0b:00.0 at offset 1 (was 100102, writing 100106)
[ 34.665992] firmware: requesting iwlwifi-3945-1.ucode
[ 34.732853] Registered led device: iwl-phy0:radio
[ 34.732853] Registered led device: iwl-phy0:assoc
[ 34.732853] Registered led device: iwl-phy0:RX
[ 34.732853] Registered led device: iwl-phy0:TX
[ 34.756904] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.720958] usbcore: deregistering interface driver hci_usb
[ 37.040325] Netfilter messages via NETLINK v0.30.
[ 37.705289] [drm] Initialized drm 1.1.0 20060810
[ 37.713318] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 37.713318] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 37.713318] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 109.285163] CPU0 attaching NULL sched-domain.
[ 109.285163] CPU1 attaching NULL sched-domain.
[ 109.293394] CPU0 attaching sched-domain:
[ 109.293405] domain 0: span 0-1
[ 109.293409] groups: 0 1
[ 109.293415] domain 1: span 0-1
[ 109.293419] groups: 0-1
[ 109.293425] CPU1 attaching sched-domain:
[ 109.293428] domain 0: span 0-1
[ 109.293432] groups: 1 0
[ 109.293437] domain 1: span 0-1
[ 109.293440] groups: 0-1
[ 121.107530] wlan0: Initial auth_alg=0
[ 121.107530] wlan0: authenticate with AP 00:15:0c:cf:b8:c4
[ 121.109005] wlan0: RX authentication from 00:15:0c:cf:b8:c4 (alg=0 transaction=2 status=0)
[ 121.109005] wlan0: authenticated
[ 121.109005] wlan0: associate with AP 00:15:0c:cf:b8:c4
[ 121.115257] wlan0: RX AssocResp from 00:15:0c:cf:b8:c4 (capab=0x411 status=0 aid=2)
[ 121.115267] wlan0: associated
[ 121.115950] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 136.581960] wlan0: no IPv6 routers present
[ 2295.046756] UDF-fs: No VRS found
[ 2295.081968] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2295.115369] ISOFS: changing to secondary root
[ 2812.016387] UDF-fs: No VRS found
[ 2812.099090] UDF-fs: No VRS found
[ 2812.110801] UDF-fs: No VRS found
[ 2812.123244] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2812.123244] ISOFS: changing to secondary root
[16258.549372] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=1)
[16258.549372] wlan0: deauthenticated
[16259.549576] wlan0: authenticate with AP 00:15:0c:cf:b8:c4
[16259.751487] wlan0: authenticate with AP 00:15:0c:cf:b8:c4
[16259.951871] wlan0: authenticate with AP 00:15:0c:cf:b8:c4
[16260.151350] wlan0: authentication with AP 00:15:0c:cf:b8:c4 timed out
[16262.877938] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[16262.877938] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[16262.877938] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[16262.877938] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[16262.877938] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[16262.877938] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[16262.877938] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[16262.877938] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[16262.877938] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[16262.879439] wlan0: Initial auth_alg=0
[16262.879439] wlan0: authenticate with AP 00:15:0c:cf:b8:c4
[16262.879439] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[16262.886584] wlan0: RX authentication from 00:15:0c:cf:b8:c4 (alg=0 transaction=2 status=0)
[16262.886593] wlan0: authenticated
[16262.886598] wlan0: associate with AP 00:15:0c:cf:b8:c4
[16262.889995] wlan0: RX ReassocResp from 00:15:0c:cf:b8:c4 (capab=0x411 status=0 aid=2)
[16262.890005] wlan0: associated
[22364.422904] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=1)
[22364.422904] wlan0: deauthenticated
[22365.424959] wlan0: authenticate with AP 00:15:0c:cf:b8:c4
[22365.625924] wlan0: authenticate with AP 00:15:0c:cf:b8:c4
[22365.825255] wlan0: authenticate with AP 00:15:0c:cf:b8:c4
[22366.024516] wlan0: authentication with AP 00:15:0c:cf:b8:c4 timed out
[22369.406226] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[22369.406226] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[22369.406226] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[22369.406226] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[22369.406226] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[22369.406226] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[22369.406226] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[22369.406226] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[22369.406226] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[22369.406226] wlan0: RX deauthentication from 00:15:0c:cf:b8:c4 (reason=7)
[22369.408062] wlan0: Initial auth_alg=0
[22369.408062] wlan0: authenticate with AP 00:15:0c:cf:b8:c4
[22369.415963] wlan0: RX authentication from 00:15:0c:cf:b8:c4 (alg=0 transaction=2 status=0)
[22369.415963] wlan0: authenticated
[22369.415963] wlan0: associate with AP 00:15:0c:cf:b8:c4
[22369.421609] wlan0: RX ReassocResp from 00:15:0c:cf:b8:c4 (capab=0x411 status=0 aid=2)
[22369.421609] wlan0: associated
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
02:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
02:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
02:09.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
02:09.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
0b:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
Reply to: