Bug#499450: gspca-modules-2.6-686: Module loads, dmesg registers webcam, but /dev/video0 doesn't exist and webcam
Subject: gspca-modules-2.6-686: Module loads, dmesg registers webcam, but /dev/video0 doesn't exist and webcam doesn't work
Package: gspca-modules-2.6-686
Version: 2:2.6.26-3
Severity: important
*** Please type your report below this line ***
I have a Dynex-branded webcam that I cannot get to work with the modules I was told to use. Kopete cannot see it, likely due to the fact that /dev/video0 isn't created. I load the modules in /etc/modules at boot up. Below is various checks of the OS information, let me know if you'd like more.
jthomas@jthomas-debian:~$ lsusb
Bus 004 Device 009: ID 05a9:8519 OmniVision Technologies, Inc. OV519 WebCam
Bus 004 Device 007: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
jthomas@jthomas-debian:~$ dmesg |tail -7
[107300.816816] usb 4-1.4: USB disconnect, address 9
[107304.724955] usb 4-1.4: new full speed USB device using ehci_hcd and address 10
[107304.816953] usb 4-1.4: configuration #1 chosen from 1 choice
[107304.822711] usb 4-1.4: New USB device found, idVendor=05a9, idProduct=8519
[107304.822726] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[107304.822733] usb 4-1.4: Product: USB Camera
[107304.822739] usb 4-1.4: Manufacturer: OmniVision Technologies, Inc.
jthomas@jthomas-debian:~$ lsmod |grep gsp
gspca 639888 0
videodev 27520 1 gspca
usbcore 118160 8 usb_storage,gspca,snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd,uhci_hcd
jthomas@jthomas-debian:~$ ls /dev/v*
/dev/vboxdrv /dev/vcs /dev/vcs1 /dev/vcs2 /dev/vcs3 /dev/vcs4 /dev/vcs5 /dev/vcs6 /dev/vcs7 /dev/vcsa /dev/vcsa1 /dev/vcsa2 /dev/vcsa3 /dev/vcsa4 /dev/vcsa5 /dev/vcsa6 /dev/vcsa7
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages gspca-modules-2.6-686 depends on:
ii gspca-modules-2.6.26-1 2.6.26+01.00.20-3 Driver for webcams and digicams ba
ii linux-image-2.6-686 [l 2.6.26+16 Linux 2.6 image on PPro/Celeron/PI
gspca-modules-2.6-686 recommends no packages.
gspca-modules-2.6-686 suggests no packages.
-- no debconf information
Reply to: