--- Begin Message ---
- To: "Debian Bug Tracking System" <submit@bugs.debian.org>
- Subject: linux-image-2.6.25-2-686: BIOS Bug: MCFG area at e0000000 is not E820-reserved on Asus Eee PC 900
- From: "Denis Misiurca" <infoman1985@gmail.com>
- Date: Sat, 23 Aug 2008 15:18:41 +0300
- Message-id: <de56f3c20808230518o36863d1fpf38baca74d1e4b1c@mail.gmail.com>
Package: linux-image-2.6.25-2-686
Version: 2.6.25-7
Severity: normal
I see this message on startup. The similar bug was reported as #480513
and is marked as fixed.
Also, sometimes my EeePC hangs unexpectedly and I have to restart it by
holding down the power button. Can this be a kernel bug or it's a
hardware problem? I didn't see this on natively installed Xandros.
-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-7) (maks@debian.org) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul
18 17:46:56 UTC 2008
** Command line:
root=/dev/sda1 ro clocksource=hpet elevator=noop quiet splash vga=788
** Tainted: P (1)
** Kernel log:
[ 4.039750] sd 1:0:1:0: [sdb] Write Protect is off
[ 4.039754] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.039799] sd 1:0:1:0: [sdb] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.039804] sdb: sdb1
[ 4.045597] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 4.229668] usb 5-5: new high speed USB device using ehci_hcd and address 2
[ 4.271982] kjournald starting. Commit interval 5 seconds
[ 4.272001] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.355933] usb 5-5: configuration #1 chosen from 1 choice
[ 4.356379] scsi3 : SCSI emulation for USB Mass Storage devices
[ 4.356618] usb 5-5: New USB device found, idVendor=0951, idProduct=1606
[ 4.356625] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 4.356630] usb 5-5: Product: UB6225
[ 4.356633] usb 5-5: Manufacturer: ENE
[ 4.356637] usb 5-5: SerialNumber: 146030377350
[ 4.356658] usb-storage: device found at 2
[ 4.356662] usb-storage: waiting for device to settle before scanning
[ 4.812068] udevd version 125 started
[ 6.574559] Linux agpgart interface v0.103
[ 6.616699] agpgart: Detected an Intel 915GM Chipset.
[ 6.616903] agpgart: Detected 7932K stolen memory.
[ 6.636456] agpgart: AGP aperture is 256M @ 0xd0000000
[ 7.017549] Atheros(R) L2 Ethernet Driver - version 2.0.3
[ 7.017556] Copyright (c) 2007 Atheros Corporation.
[ 7.017607] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 7.017622] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 7.220274] ath_hal: module license 'Proprietary' taints kernel.
[ 7.269095] ath_hal: 0.10.2.2-ATHEROS (AR5210, AR5211, AR5212,
AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425)
[ 7.452550] wlan: trunk
[ 7.506439] input: Power Button (FF) as /class/input/input1
[ 7.530231] ACPI: Power Button (FF) [PWRF]
[ 7.530378] input: Lid Switch as /class/input/input2
[ 7.549910] ACPI: Lid Switch [LID]
[ 7.550038] input: Sleep Button (CM) as /class/input/input3
[ 7.570239] ACPI: Sleep Button (CM) [SLPB]
[ 7.570347] input: Power Button (CM) as /class/input/input4
[ 7.581993] ath_pci: trunk
[ 7.582049] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level,
low) -> IRQ 18
[ 7.582065] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 8.071393] MadWifi: ath_attach: Switching rfkill capability off
[ 8.102273] ACPI: Power Button (CM) [PWRB]
[ 8.288053] ath_rate_sample: 1.2 (trunk)
[ 9.019314] ACPI: AC Adapter [AC0] (on-line)
[ 9.329400] usb-storage: device scan complete
[ 9.329943] scsi 3:0:0:0: Direct-Access USB2.0 CardReader SD0
0100 PQ: 0 ANSI: 0
[ 9.331621] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 10.248813] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 10.248921] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
[ 10.248962] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.347054] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 10.347086] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 10.372200] hda_codec: Unknown model for ALC662, trying auto-probe
from BIOS...
[ 10.406934] input: PC Speaker as /class/input/input5
[ 10.490918] intel_rng: FWH not detected
[ 10.517704] ACPI: EC: missing OBF confirmation, don't expect it any longer.
[ 10.587325] ACPI: Battery Slot [BAT0] (battery present)
[ 10.587771] input: Video Bus as /class/input/input6
[ 10.614421] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.745610] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 10.745648] rtc0: alarms up to one month
[ 10.758210] MadWifi: ath_attach: Switching per-packet transmit
power control off
[ 10.758843] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 10.758853] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps
9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 10.758870] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 10.758885] wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
[ 10.758890] wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
[ 10.758895] wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
[ 10.758900] wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
[ 10.758905] wifi0: ath_announce: Use hw queue 8 for CAB traffic
[ 10.758909] wifi0: ath_announce: Use hw queue 9 for beacons
[ 10.866470] ath_pci: wifi0: Atheros 5424/2424: mem=0xfbef0000, irq=18
[ 10.867590] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level,
low) -> IRQ 19
[ 12.542187] EXT3 FS on sda1, internal journal
[ 12.794237] input: ImPS/2 Logitech Wheel Mouse as /class/input/input7
[ 13.088466] Asus EeePC Hotkey Driver
[ 13.088612] [eeepc hotk] Hotkey init flags 0x41.
[ 13.089836] [eeepc hotk] Get control methods supported: 0x101711
[ 13.118128] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 13.127525] fuse init (API version 7.9)
[ 27.888455] kjournald starting. Commit interval 300 seconds
[ 27.890148] EXT3 FS on sdb1, internal journal
[ 27.890156] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.651506] Bluetooth: Core ver 2.11
[ 34.655049] NET: Registered protocol family 31
[ 34.655064] Bluetooth: HCI device and connection manager initialized
[ 34.655075] Bluetooth: HCI socket layer initialized
[ 34.742919] Bluetooth: L2CAP ver 2.9
[ 34.742934] Bluetooth: L2CAP socket layer initialized
[ 34.769357] Bluetooth: RFCOMM socket layer initialized
[ 34.769393] Bluetooth: RFCOMM TTY layer initialized
[ 34.769400] Bluetooth: RFCOMM ver 1.8
[ 38.362948] [drm] Initialized drm 1.1.0 20060810
[ 38.369594] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 38.369609] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 38.369778] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 105.020318] NET: Registered protocol family 10
[ 105.022867] lo: Disabled Privacy Extensions
[ 105.025417] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 115.711263] ath0: no IPv6 routers present
[ 160.750293] ath0: no IPv6 routers present
** Loaded modules:
Module Size Used by
wlan_ccmp 7872 2
ipv6 241956 8
i915 27744 2
drm 72280 3 i915
rfcomm 36368 0
l2cap 22784 5 rfcomm
bluetooth 52900 4 rfcomm,l2cap
cpufreq_conservative 7432 0
cpufreq_userspace 3812 0
cpufreq_stats 5216 0
cpufreq_ondemand 8428 0
cpufreq_powersave 1856 0
fuse 44348 3
p4_clockmod 5380 0
speedstep_lib 5316 1 p4_clockmod
freq_table 4512 3 cpufreq_stats,cpufreq_ondemand,p4_clockmod
eeepc_acpi 6928 0
wlan_scan_sta 12480 1
psmouse 35920 0
rtc_cmos 10304 0
rtc_core 17532 1 rtc_cmos
rtc_lib 2976 1 rtc_core
serio_raw 6532 0
rng_core 4900 0
pcspkr 3136 0
i2c_i801 9520 0
snd_hda_intel 309976 1
i2c_core 22548 1 i2c_i801
iTCO_wdt 11204 0
snd_pcm_oss 37824 0
snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 14880 1 snd_pcm_oss
video 19728 0
output 3712 1 video
battery 8448 0
ac 4448 0
snd_seq_dummy 3780 0
ath_rate_sample 12448 1
ath_pci 165868 0
button 8240 0
wlan 216880 5 wlan_ccmp,wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 279232 3 ath_rate_sample,ath_pci
atl2 27608 0
snd_seq_oss 28544 0
snd_seq_midi_event 6976 1 snd_seq_oss
snd_seq 45872 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer 21320 2 snd_pcm,snd_seq
snd_seq_device 7564 3 snd_seq_dummy,snd_seq_oss,snd_seq
intel_agp 25084 1
agpgart 31720 3 drm,intel_agp
snd 48772 10
snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore 7488 1 snd
snd_page_alloc 9992 2 snd_hda_intel,snd_pcm
evdev 11328 6
ext3 120360 2
jbd 43444 1 ext3
mbcache 8260 1 ext3
sd_mod 26072 4
ide_pci_generic 4228 0 [permanent]
ide_core 100312 1 ide_pci_generic
ata_generic 8004 0
ahci 27336 0
usb_storage 76896 0
ata_piix 20196 2
libata 142288 3 ata_generic,ahci,ata_piix
scsi_mod 138668 3 sd_mod,usb_storage,libata
dock 10448 1 libata
ehci_hcd 32620 0
uhci_hcd 22352 0
usbcore 130032 4 usb_storage,ehci_hcd,uhci_hcd
thermal 19100 0
processor 39660 2 thermal
fan 5636 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile
915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590]
(rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8337]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #1 [8086:2658] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #2 [8086:2659] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #3 [8086:265a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #4 [8086:265b] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d4) (prog-if 01)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC
Interface Bridge [8086:2641] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ahci, ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x
802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Device [1a3b:1026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath_pci
Kernel modules: ath_pci, ath5k
03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L2 100
Mbit Ethernet Adapter [1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 220
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fbfa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl2
Kernel modules: atl2
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.25-2-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.25-2-686 suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.25 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false
linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false
--- End Message ---