Your message dated Sat, 13 Sep 2008 22:15:24 +0200 with message-id <20080913201524.GB7290@wavehammer.waldi.eu.org> and subject line uses new-style rtc and hpet emulation now has caused the Debian Bug report #386226, regarding hwclock doesn't work with this kernel to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 386226: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=386226 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: hwclock doesn't work with this kernel
- From: Joey Hess <joeyh@debian.org>
- Date: Sat, 9 Feb 2008 14:31:44 -0500
- Message-id: <20080209193144.GA4176@kodama.kitenet.net>
Package: linux-image-2.6.24-1-686 Version: 2.6.24-3 Severity: normal root@kodama:/home/joey>hwclock --show --debug hwclock from util-linux-ng 2.13.1 Using /dev interface to clock. Last drift adjustment done at 1202584540 seconds after 1969 Last calibration done at 1202584540 seconds after 1969 Hardware clock is on UTC time Assuming hardware clock is kept in UTC time. Waiting for clock tick... select() to /dev/rtc to wait for clock tick timed out ...got clock tick zsh: exit 1 hwclock --show --debug Happens every time. Notice that the clock tick seems (?) to arrive just after it gives up. This only happens if I'm using 2.6.24. Here's how it looks in strace: open("/dev/rtc", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, RTC_UIE_ON, 0) = 0 select(4, [3], NULL, NULL, {5, 0}) = 0 (Timeout) write(2, "select() to /dev/rtc to wait for"..., 54select() to /dev/rtc to wait for clock tick timed out ) = 54 ioctl(3, RTC_UIE_OFF, 0) = 0 close(3) = 0 write(1, "...got clock tick\n", 18...got clock tick ) = 18 exit_group(1) Hardware is a Fujitsu p7120 lifebook. -- Package-specific info: ** Version: Linux version 2.6.24-1-686 (Debian 2.6.24-3) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Wed Feb 6 15:20:27 UTC 2008 ** Command line: BOOT_IMAGE=(hd0,1)/vmlinuz-2.6.24-1-686 root=/dev/mapper/kodama-root ro ** Not tainted ** Kernel log: hda: 117210240 sectors (60011 MB), CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 < hda5 > Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com padlock: VIA PadLock not detected. padlock: VIA PadLock Hash Engine not detected. swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input1 Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 intel_rng: FWH not detected ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: Battery Slot [CMB1] (battery present) ACPI: Battery Slot [CMB2] (battery absent) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] ACPI: AC Adapter [AC] (off-line) ieee80211_crypt: registered algorithm 'NULL' Yenta: CardBus bridge found at 0000:06:03.0 [10cf:1254] ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x202000 Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff input: SynPS/2 Synaptics TouchPad as /class/input/input5 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:06:03.2 [1180:0822] (rev 17) ACPI: PCI Interrupt 0000:06:03.2[A] -> GSI 16 (level, low) -> IRQ 16 sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. mmc0: SDHCI at 0xb0100800 irq 16 DMA ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 18 (level, low) -> IRQ 17 ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb input: Video Bus as /class/input/input6 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ipw2200: Detected geography ZZB (11 802.11bg channels, 13 802.11a channels) udev: renamed network interface eth1 to wlan0 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. EXT3 FS on dm-1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1519608k swap on /dev/mapper/kodama-swap. Priority:-1 extents:1 across:1519608k RPC: Registered udp transport module. RPC: Registered tcp transport module. NET: Registered protocol family 10 lo: Disabled Privacy Extensions lp: driver loaded but no devices found ppdev: user-space parallel port driver tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> tun0: Disabled Privacy Extensions eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized i915 1.6.0 20060119 on minor 0 ** Loaded modules: Module Size Used by i915 22048 2 drm 74036 3 i915 rfcomm 36784 2 l2cap 22880 9 rfcomm tun 10976 1 ppdev 8804 0 parport_pc 33668 0 lp 11076 0 parport 34280 3 ppdev,parport_pc,lp acpi_cpufreq 9260 0 cpufreq_stats 5184 0 cpufreq_conservative 7560 0 cpufreq_powersave 1856 0 cpufreq_ondemand 8492 1 cpufreq_userspace 4260 0 freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand ipv6 240772 30 nfs 228168 6 lockd 60744 2 nfs nfs_acl 3520 1 nfs sunrpc 170780 24 nfs,lockd,nfs_acl pcmcia 37036 0 joydev 11360 0 video 18672 0 output 3744 1 video hci_usb 14780 2 bluetooth 53220 7 rfcomm,l2cap,hci_usb ipw2200 134568 0 sdhci 16836 0 ieee80211 31048 1 ipw2200 mmc_core 47300 1 sdhci yenta_socket 24844 1 rsrc_nonstatic 11872 1 yenta_socket pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic serio_raw 6660 0 ieee80211_crypt 5888 1 ieee80211 ac 6116 0 button 8432 0 battery 13572 0 firmware_class 9408 2 pcmcia,ipw2200 psmouse 36464 0 snd_hda_intel 275264 1 iTCO_wdt 11268 0 snd_pcm_oss 38272 0 snd_mixer_oss 15296 2 snd_pcm_oss snd_pcm 71780 2 snd_hda_intel,snd_pcm_oss snd_timer 21092 1 snd_pcm i2c_i801 9232 0 intel_agp 23412 1 agpgart 31688 3 drm,intel_agp i2c_core 22432 1 i2c_i801 snd 48612 5 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 7552 2 snd snd_page_alloc 10056 2 snd_hda_intel,snd_pcm evdev 11104 6 rtc 13052 0 pcspkr 3200 0 ext3 122920 2 jbd 43732 1 ext3 mbcache 8288 1 ext3 sha256_generic 11040 0 aes_i586 33376 2 aes_generic 27776 0 geode_aes 6024 0 cbc 4416 1 blkcipher 6724 2 geode_aes,cbc dm_crypt 13220 1 dm_mirror 21600 0 dm_snapshot 16964 0 dm_mod 55812 10 dm_crypt,dm_mirror,dm_snapshot sg 33264 0 sr_mod 16708 0 cdrom 32512 1 sr_mod ide_disk 15648 3 8139cp 21856 0 ata_piix 17092 0 8139too 25600 0 mii 5312 2 8139cp,8139too firewire_ohci 17760 0 firewire_core 39232 1 firewire_ohci crc_itu_t 2176 1 firewire_core ata_generic 7428 0 ahci 26116 0 libata 144464 3 ata_piix,ata_generic,ahci ehci_hcd 32524 0 uhci_hcd 23376 0 piix 7492 0 [permanent] scsi_mod 141196 3 sg,sr_mod,libata generic 4388 0 [permanent] ide_core 108292 3 ide_disk,piix,generic usbcore 132940 4 hci_usb,ehci_hcd,uhci_hcd thermal 16028 0 processor 36520 3 acpi_cpufreq,thermal fan 4772 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12d7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1400 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at b0040000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> Kernel modules: intelfb 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at 30000000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:1326] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 4: I/O ports at 1420 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1440 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 17 Region 4: I/O ports at 1460 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0100000-b01fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e5] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1410 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Fujitsu Limited. Unknown device [10cf:12e6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 14b8 [size=8] Region 1: I/O ports at 140c [size=4] Region 2: I/O ports at 14b0 [size=8] Region 3: I/O ports at 1408 [size=4] Region 4: I/O ports at 14a0 [size=16] Region 5: Memory at b0004400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci, ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: Fujitsu Limited. Unknown device [10cf:12e7] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 14c0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 06:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3) Subsystem: Fujitsu Limited. Unknown device [10cf:1254] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0103000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 34000000-37fff000 (prefetchable) Memory window 1: 38000000-3bfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 06:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08) (prog-if 10 [OHCI]) Subsystem: Fujitsu Limited. Unknown device [10cf:1255] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 20 Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:03.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17) Subsystem: Fujitsu Limited. Unknown device [10cf:1323] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0100800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci Kernel modules: sdhci 06:03.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08) Subsystem: Fujitsu Limited. Unknown device [10cf:1257] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: Memory at b0100c00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 06:03.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 03) Subsystem: Fujitsu Limited. Unknown device [10cf:1324] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: Memory at b0101000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 06:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Fujitsu Limited. Unknown device [10cf:12ce] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 2000 [size=256] Region 1: Memory at b0101400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too Kernel modules: 8139too, 8139cp 06:05.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG Network Connection [8086:4223] (rev 05) Subsystem: Intel Corporation Unknown device [8086:1030] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at b0102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 Kernel modules: ipw2200 -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-686 depends on: ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-1-686 recommends: ii libc6-i686 2.7-6 GNU C Library: Shared libraries [i -- debconf information excluded -- see shy joAttachment: signature.asc
Description: Digital signature
--- End Message ---
--- Begin Message ---
- To: 386226-done@bugs.debian.org
- Subject: uses new-style rtc and hpet emulation now
- From: Bastian Blank <waldi@debian.org>
- Date: Sat, 13 Sep 2008 22:15:24 +0200
- Message-id: <20080913201524.GB7290@wavehammer.waldi.eu.org>
Version: 2.6.26-1 Since 2.6.26 we only have new-style RTC and the HPET irq emulation enabled. This should have fixed this. Bastian -- I object to intellect without discipline; I object to power without constructive purpose. -- Spock, "The Squire of Gothos", stardate 2124.5
--- End Message ---