Bug#498576: linux-image-2.6.26-1-686: USB Mouse stopped working during copying files to USB drive
Package: linux-image-2.6.26-1-686
Version: 2.6.26-4
Severity: normal
Tags: l10n
During copying large files (3 files, totally ~600 MB) to USB drive
(Sandisk Cruzer) with unicode characters in their names using Nautilus,
the USB mouse
stopped working (the touchpad still worked). File copying was stuck
(after successfully copying 2 of the 3 files), and the device was
unmounted (and not recognized any more until restart). When trying to
restart the X server, the computer hangs.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-4) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 12:00:54 UTC 2008
** Command line:
root=/dev/sda3 ro
** Tainted: P (1)
** Kernel log:
[ 4.412756] ata1.00: configured for UDMA/100
[ 4.420042] usbcore: registered new interface driver hiddev
[ 4.429078] input: HID 1241:1166 as /class/input/input1
[ 4.429078] input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:13.0-1
[ 4.429078] usbcore: registered new interface driver usbhid
[ 4.429078] usbhid: v2.6:USB HID core driver
[ 4.732066] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.732302] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4032GS AS21 PQ: 0 ANSI: 5
[ 4.732653] ATIIXP: IDE controller (0x1002:0x4376 rev 0x80) at PCI slot 0000:00:14.1
[ 4.732740] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.732855] ATIIXP: not 100% native mode: will probe irqs later
[ 4.732913] ATIIXP: IDE port disabled
[ 4.732975] ide0: BM-DMA at 0x8468-0x846f
[ 4.733034] Probing IDE interface ide0...
[ 5.468504] hda: DW-224E-C, ATAPI CD/DVD-ROM drive
[ 6.140090] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 6.140318] hda: UDMA/33 mode selected
[ 6.140617] ide0 at 0x170-0x177,0x376 on irq 15
[ 6.142854] ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 6.144282] eth0: RealTek RTL8139 at 0xa000, 00:16:36:b5:b2:ed, IRQ 21
[ 6.144340] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 6.172149] Driver 'sd' needs updating - please use bus_type methods
[ 6.172365] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 6.172450] sd 0:0:0:0: [sda] Write Protect is off
[ 6.172504] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.172552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.172703] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 6.172785] sd 0:0:0:0: [sda] Write Protect is off
[ 6.172840] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.172887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.172955] sda:<6>hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1654kB Cache
[ 6.189970] Uniform CD-ROM driver Revision: 3.20
[ 6.243093] sda1 sda2 < sda5 sda6 > sda3
[ 6.285010] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.613306] PM: Starting manual resume from disk
[ 6.652918] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.652986] EXT3-fs: write access will be enabled during recovery.
[ 13.461261] kjournald starting. Commit interval 5 seconds
[ 13.461261] EXT3-fs: sda3: orphan cleanup on readonly fs
[ 13.461261] ext3_orphan_cleanup: deleting unreferenced inode 556643
[ 13.461261] ext3_orphan_cleanup: deleting unreferenced inode 556627
[ 13.461261] EXT3-fs: sda3: 2 orphan inodes deleted
[ 13.461261] EXT3-fs: recovery complete.
[ 13.474779] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.709402] udevd version 125 started
[ 16.868680] Linux agpgart interface v0.103
[ 17.043084] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.065178] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.334441] input: Power Button (FF) as /class/input/input2
[ 17.360684] ACPI: Power Button (FF) [PWRF]
[ 17.360850] input: Lid Switch as /class/input/input3
[ 17.392886] ACPI: Lid Switch [LID]
[ 17.393036] input: Power Button (CM) as /class/input/input4
[ 17.416132] ACPI: Power Button (CM) [PWRB]
[ 17.454477] ACPI: AC Adapter [ACAD] (on-line)
[ 18.220260] ACPI: Battery Slot [BAT1] (battery present)
[ 18.272914] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 18.537385] input: PC Speaker as /class/input/input5
[ 18.754410] Error: Driver 'pcspkr' is already registered, aborting...
[ 18.957465] Yenta: CardBus bridge found at 0000:09:01.0 [1179:ff31]
[ 18.957562] PCI: Bus 10, cardbus bridge: 0000:09:01.0
[ 18.957616] IO window: 0x0000a400-0x0000a4ff
[ 18.957673] IO window: 0x0000a800-0x0000a8ff
[ 18.957731] PREFETCH window: 0x80400000-0x807fffff
[ 18.957790] MEM window: 0x84000000-0x87ffffff
[ 18.957855] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 18.957910] Yenta: Routing CardBus interrupts to PCI
[ 18.957969] Yenta TI: socket 0000:09:01.0, mfunc 0x00001002, devctl 0x44
[ 18.993606] ath_hal: module license 'Proprietary' taints kernel.
[ 18.995137] AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
[ 19.188839] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 19.188905] Socket status: 30000006
[ 19.188958] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 19.189015] cs: IO port probe 0xa000-0xafff: clean.
[ 19.189411] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 19.189885] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.190155] ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 19.773685] MadWifi: ath_attach: Switching rfkill capability off.
[ 19.875761] wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
[ 19.899744] ath_pci: wifi0: Atheros 2413: mem=0xc0200000, irq=22
[ 19.931686] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
[ 19.965744] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 20.334739] cs: IO port probe 0x100-0x3af: clean.
[ 20.334739] cs: IO port probe 0x3e0-0x4ff: clean.
[ 20.334739] cs: IO port probe 0x820-0x8ff: clean.
[ 20.341009] cs: IO port probe 0xc00-0xcf7: clean.
[ 20.341969] cs: IO port probe 0xa00-0xaff: clean.
[ 21.076795] Adding 666656k swap on /dev/sda6. Priority:-1 extents:1 across:666656k
[ 21.503783] EXT3 FS on sda3, internal journal
[ 21.783157] device-mapper: uevent: version 1.0.3
[ 21.789233] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 23.353153] eth0: link down
[ 29.308689] lp: driver loaded but no devices found
[ 29.354194] ppdev: user-space parallel port driver
[ 30.984581] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 31.122169] NET: Registered protocol family 10
[ 31.122812] lo: Disabled Privacy Extensions
[ 31.123412] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 61.778003] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[ 77.928039] ath0: no IPv6 routers present
** Loaded modules:
Module Size Used by
wlan_wep 5312 1
nls_cp1255 5344 1
nls_cp862 5856 1
vfat 9152 1
fat 40864 1 vfat
nls_base 6820 4 nls_cp1255,nls_cp862,vfat,fat
binfmt_misc 7528 1
ipv6 235204 12
ppdev 6468 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
video 16400 0
output 2912 1 video
cpufreq_ondemand 6476 0
cpufreq_conservative 5960 0
cpufreq_userspace 3172 0
cpufreq_stats 3776 0
freq_table 4224 2 cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 1856 0
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
joydev 8480 0
pcmcia 29548 0
firmware_class 6816 1 pcmcia
wlan_scan_sta 11200 1
ath_rate_sample 11008 1
snd_hda_intel 324248 1
ath_pci 202104 0
wlan 193040 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 300672 3 ath_rate_sample,ath_pci
yenta_socket 20620 1
rsrc_nonstatic 9504 1 yenta_socket
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
psmouse 32336 0
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
serio_raw 4740 0
snd_pcm 62628 2 snd_hda_intel,snd_pcm_oss
snd_timer 17800 1 snd_pcm
pcspkr 2432 0
snd 45604 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 6368 1 snd
i2c_piix4 7216 0
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
i2c_core 19828 1 i2c_piix4
battery 10180 0
ac 4196 0
button 6064 0
shpchp 25528 0
pci_hotplug 23460 1 shpchp
ati_agp 6220 0
agpgart 28776 1 ati_agp
evdev 8000 6
ext3 105256 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
sd_mod 22200 4
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
8139too 20320 0
atiixp 3396 0 [permanent]
sata_sil 7176 3
ide_pci_generic 3908 0 [permanent]
ide_core 92628 3 ide_cd_mod,atiixp,ide_pci_generic
8139cp 16800 0
mii 4896 2 8139too,8139cp
ehci_hcd 28428 0
ata_generic 4676 0
ohci_hcd 18500 0
usbcore 118160 4 usbhid,ehci_hcd,ohci_hcd
libata 140416 2 sata_sil,ata_generic
scsi_mod 129356 2 sd_mod,libata
dock 8272 1 libata
thermal 15228 0
processor 32576 2 thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc Device [1002:5a31] (rev 01)
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Kernel modules: ati-agp
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8440 [size=8]
Region 1: I/O ports at 8430 [size=4]
Region 2: I/O ports at 8420 [size=8]
Region 3: I/O ports at 8410 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 80000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (rev 80) (prog-if 10)
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (rev 80) (prog-if 10)
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (rev 80) (prog-if 20)
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 81)
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8040 [size=16]
Region 1: Memory at c0004400 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (rev 80) (prog-if 88 [Master SecP])
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8460 [size=16]
Capabilities: <access denied>
Kernel driver in use: ATIIXP_IDE
Kernel modules: atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller [1002:437b] (rev 01)
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] (rev 80)
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (rev 80) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=09, subordinate=0e, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0200000-c02fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
09:01.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01)
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0211000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=09, secondary=0a, subordinate=0d, sec-latency=176
Memory window 0: 80400000-807ff000 (prefetchable)
Memory window 1: 84000000-87fff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
09:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Toshiba America Info Systems Device [1179:ff31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at c0210000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
09:04.0 Ethernet controller [0200]: Atheros Communications Inc. AR2413 802.11bg NIC [168c:001a] (rev 01)
Subsystem: Askey Computer Corp. Device [144f:7094]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath_pci
Kernel modules: ath5k, ath_pci
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92g tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
Reply to: