Bug#498536: .26 breaks firmware loading for qla2xxx on sparc
Package: linux-image-2.6.26-1-sparc64-smp
Version: 2.6.26-4
Severity: grave
Tags: upstream
Hi,
qla2xxx's firmware loading thingy got hosed between .25 and .26,
I've already reported something along these lines to upstream, but I just
verified it with our kernel image so I'm filing it here too.
[egin: Loading essential drivers... ...
49.444722] SCSI subsystem initialized
[ 49.524563] QLogic Fibre Channel HBA Driver: 8.02.01-k4-debug
[ 49.602779] qla2xxx 0001:00:04.0: Found an ISP2200, irq 19, iobase 0x000007fd
[0100000
[ 49.714344] qla2xxx 0001:00:04.0: Configuring PCI space...
[ 49.789041] scsi(0): No matching ROM signature.
[ 49.851178] qla2xxx 0001:00:04.0: Configure NVRAM parameters...
[ 50.025526] qla2xxx 0001:00:04.0: Inconsistent NVRAM detected: checksum=0x0 i
L=<4>qla2xxx 0001:00:04.0: Falling back to functioning (yet invalid -- WWPN) def
Bults.
[ 50.230463] scsi(0): NVRAM configuration failed!
[ 50.293695] qla2xxx 0001:00:04.0: Verifying loaded RISC code...
[ 50.373898] scsi(0): **** Load RISC code ****
0 50.449209] firmware: requesting ql2200_fw.bin
[ 110.508456] scsi(0): Failed to load firmware image (ql2200_fw.bin).
[ 110.593119] qla2xxx 0001:00:04.0: Firmware image unavailable.
[ 110.671025] qla2xxx 0001:00:04.0: Firmware images can be retrieved from: ftp:
[/ftp.qlogic.com/outgoing/linux/firmware/.
d 110.819988] scsi(0): Setup chip **** FAILED ****.
a 110.884362] qla2xxx 0001:00:04.0: Failed to initialize adapter
[ 110.963425] scsi(0): Failed to initialize adapter - Adapter flags 10.
[one.
--
2. That which causes joy or happiness.
Reply to: