Bug#494162: I guess this is related to 466942
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-4
Followup-For: Bug #494162
It happens to me too, and to many others.
See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466942 - "use
CONFIG_FAIR_CGROUP_SCHED instead of CONFIG_FAIR_USER_SCHED", though the
kernel now is using CONFIG_FAIR_GROUP_SCHED but it causes the same bad
effects.
The CGROUP infrastructure is the only way to allow runtime configuration
on how the scheduler should work, so some simple DebConf questions could
setup the system as the user wants it (even distribution between users, even
distribution between groups, even distribution for all the processes without
considering groups or users), and even after that, a user or sysadmin could
further configure it.
Currently, the FAIR_GROUP_SCHED option is the worst choice, because of 2
things:
1 - it forces one behaviour and there is no other way but recompile
the kernel to change it.
2 - it changes a default behaviour used for many years! you may run a
program with nice 19 and SCHED_IDLEPRIO and still consume a lot
of CPU time and starve other processes. Users and sysadmins are
used to the nice command to control priorities of processes
without thinking about groupings by group or user id.
With FAIR_CGROUP_SCHED and no configuration it runs as before, with the
behaviour that everyone got used in all this years, yet allowing to set it to
any other behaviour needed.
I hope the kernel maintainers change their mind and switch this option, I
would not like to recompile the kernel in all the computers I maintain...
Thanks for your consideration.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC 2008
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-amd64 root=UUID=c662531d-951e-4c01-a372-3212249feb65 ro
** Tainted: P (1)
** Kernel log:
[ 1.835922] sata_nv 0000:00:08.0: version 3.5
[ 1.835922] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 1.835922] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 1.835922] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 1.835922] scsi0 : sata_nv
[ 1.835922] scsi1 : sata_nv
[ 1.835922] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20
[ 1.835922] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20
[ 2.308035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.319852] ata1.00: ATA-7: SAMSUNG HD160JJ, ZM100-47, max UDMA7
[ 2.319852] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.363895] ata1.00: configured for UDMA/133
[ 2.690238] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.691836] isa bounce pool size: 16 pages
[ 2.691836] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ ZM10 PQ: 0 ANSI: 5
[ 2.691836] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 2.691836] ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 2.691836] PCI: Setting latency timer of device 0000:00:08.1 to 64
[ 2.691836] scsi2 : sata_nv
[ 2.691836] scsi3 : sata_nv
[ 2.695841] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23
[ 2.695841] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23
[ 3.038155] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.378239] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.383847] Uniform Multi-Platform E-IDE driver
[ 3.383886] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.384516] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[ 3.384555] NFORCE-MCP61: IDE controller (0x10de:0x03ec rev 0xa2) at PCI slot 0000:00:06.0
[ 3.384619] NFORCE-MCP61: not 100% native mode: will probe irqs later
[ 3.389929] NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling workaround.
[ 3.389976] NFORCE-MCP61: IDE port disabled
[ 3.390011] ide0: BM-DMA at 0xffa0-0xffa7
[ 3.390045] Probing IDE interface ide0...
[ 4.122240] hda: SONY DVD RW DRU-830A, ATAPI CD/DVD-ROM drive
[ 4.794216] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.794542] hda: drive side 80-wire cable detection failed, limiting max speed to UDMA33
[ 4.794588] hda: UDMA/33 mode selected
[ 4.794983] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.809828] Driver 'sd' needs updating - please use bus_type methods
[ 4.809942] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.809987] sd 0:0:0:0: [sda] Write Protect is off
[ 4.810021] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.810031] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.810031] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.810031] sd 0:0:0:0: [sda] Write Protect is off
[ 4.810031] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.810031] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.810087] sda: sda1 sda2 sda3 <<6>hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 4.826125] Uniform CD-ROM driver Revision: 3.20
[ 4.826125] sda5 sda6 sda7 sda8 >
[ 4.858042] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.186119] PM: Starting manual resume from disk
[ 5.192007] ReiserFS: sda8: found reiserfs format "3.6" with standard journal
[ 5.192052] ReiserFS: sda8: using ordered data mode
[ 5.198127] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.198127] ReiserFS: sda8: checking transaction log (sda8)
[ 5.230248] ReiserFS: sda8: Using r5 hash to sort names
[ 6.544272] udevd version 125 started
[ 7.524596] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 7.524596] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[ 7.700594] input: PC Speaker as /class/input/input2
[ 7.856612] input: Power Button (FF) as /class/input/input3
[ 7.906182] ACPI: Power Button (FF) [PWRF]
[ 7.906296] input: Power Button (CM) as /class/input/input4
[ 7.933649] ACPI: Power Button (CM) [PWRB]
[ 8.117813] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
[ 8.177842] pnp: the driver 'parport_pc' has been registered
[ 8.177842] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.177842] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 8.253733] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 8.253733] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 8.253733] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 8.265766] parport_pc 00:06: driver attached
[ 8.276773] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.301729] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 10.165713] Adding 522072k swap on /dev/sda5. Priority:-1 extents:1 across:522072k
[ 19.209561] loop: module loaded
[ 19.233550] w83627ehf: Found W83627EHG chip at 0x290
[ 19.625714] fuse init (API version 7.9)
[ 19.996470] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.072439] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.734896] PPP generic driver version 2.4.2
[ 20.853200] NET: Registered protocol family 10
[ 20.853200] lo: Disabled Privacy Extensions
[ 24.033231] ACPI: WMI: Mapper loaded
[ 24.541258] lp0: using parport0 (interrupt-driven).
[ 24.557258] ppdev: user-space parallel port driver
[ 26.143726] NET: Registered protocol family 24
[ 31.608344] eth0: no IPv6 routers present
[ 33.512202] nvidia: module license 'NVIDIA' taints kernel.
[ 33.765989] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
[ 33.765995] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LMC9] -> GSI 21 (level, low) -> IRQ 21
[ 33.766002] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 33.766151] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.12 Thu Jul 17 18:10:24 PDT 2008
[ 5244.024448] sox[18355]: segfault at 88c ip 7fe725aed6e2 sp 7fff2e13cee0 error 4 in libsfx.so.0.0.0[7fe725ae3000+25000]
[ 5609.487987] sox[18377]: segfault at 88c ip 7f66c89b96e2 sp 7fffd1009db0 error 4 in libsfx.so.0.0.0[7f66c89af000+25000]
[ 6006.772465] sox[18408]: segfault at 88c ip 7faa42a686e2 sp 7fff4b0b9e60 error 4 in libsfx.so.0.0.0[7faa42a5e000+25000]
[ 6306.662674] sox[18419]: segfault at 88c ip 7fb4ad4eb6e2 sp 7fffb5b3d8e0 error 4 in libsfx.so.0.0.0[7fb4ad4e1000+25000]
[ 6629.494490] sox[18426]: segfault at 88c ip 7f674c0b86e2 sp 7fff547084c0 error 4 in libsfx.so.0.0.0[7f674c0ae000+25000]
[ 6930.791034] sox[18434]: segfault at 88c ip 7fb8341b56e2 sp 7fff3c8055a0 error 4 in libsfx.so.0.0.0[7fb8341ab000+25000]
** Loaded modules:
Module Size Used by
nvidia 8104816 24
pppoe 14976 2
pppox 7960 1 pppoe
ppdev 11656 0
lp 14724 0
video 24084 0
output 7808 1 video
battery 16904 0
container 8320 0
wmi 11712 0
sbs 17808 0
sbshc 10368 1 sbs
ac 9352 0
ipv6 288200 20
ppp_generic 27816 6 pppoe,pppox
slhc 10112 1 ppp_generic
nls_utf8 6272 2
nls_cp437 11136 2
vfat 14976 2
fat 51128 1 vfat
nls_base 12932 4 nls_utf8,nls_cp437,vfat,fat
fuse 53184 2
eeprom 10640 0
w83627ehf 26512 0
hwmon_vid 7296 1 w83627ehf
loop 19468 0
snd_hda_intel 434776 3
snd_pcm_oss 41760 0
snd_mixer_oss 18816 1 snd_pcm_oss
snd_pcm 81800 3 snd_hda_intel,snd_pcm_oss
snd_timer 25744 1 snd_pcm
snd 63688 10 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 12064 1 snd
parport_pc 31016 1
parport 41776 3 ppdev,lp,parport_pc
button 11680 0
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
psmouse 42268 0
serio_raw 9860 0
pcspkr 7040 0
evdev 14208 3
i2c_nforce2 10752 0
i2c_core 27936 3 nvidia,eeprom,i2c_nforce2
k8temp 9216 0
reiserfs 211072 1
ide_cd_mod 36360 0
cdrom 37928 1 ide_cd_mod
sd_mod 29376 6
ide_pci_generic 9220 0 [permanent]
amd74xx 13448 0 [permanent]
ide_core 128284 3 ide_cd_mod,ide_pci_generic,amd74xx
floppy 61672 0
sata_nv 27528 5
ata_generic 10116 0
libata 165472 2 sata_nv,ata_generic
scsi_mod 160760 2 sd_mod,libata
dock 14112 1 libata
forcedeth 54032 0
ohci_hcd 25092 0
ehci_hcd 36108 0
thermal 22688 0
processor 42304 1 thermal
fan 9352 0
thermal_sys 17728 4 video,thermal,processor,fan
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
Subsystem: ASRock Incorporation Device [1849:03ea]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev a2)
Subsystem: ASRock Incorporation Device [1849:03e0]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
Subsystem: ASRock Incorporation Device [1849:03eb]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=64]
Region 4: I/O ports at 5000 [size=64]
Region 5: I/O ports at 6000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
Subsystem: ASRock Incorporation Device [1849:03eb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f1] (rev a3) (prog-if 10)
Subsystem: ASRock Incorporation Device [1849:03f1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df7ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f2] (rev a3) (prog-if 20)
Subsystem: ASRock Incorporation Device [1849:03f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at df7fec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
Subsystem: ASRock Incorporation Device [1849:3662]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at df7f8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device [1849:03ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: ata_generic, amd74xx, ide-pci-generic
00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2)
Subsystem: ASRock Incorporation Device [1849:03ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 1276
Region 0: Memory at df7fd000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d480 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASRock Incorporation Device [1849:03f6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d080 [size=4]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at c880 [size=16]
Region 5: Memory at df7fc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv, ata_generic, ide-pci-generic
00:08.1 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASRock Incorporation Device [1849:03f6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at c800 [size=8]
Region 1: I/O ports at c480 [size=4]
Region 2: I/O ports at c400 [size=8]
Region 3: I/O ports at c080 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: Memory at df7f7000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv, ata_generic, ide-pci-generic
00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: df800000-dfffffff
Prefetchable memory behind bridge: 00000000da000000-00000000dcffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0d.0 VGA compatible controller [0300]: nVidia Corporation GeForce 6150SE nForce 430 [10de:03d0] (rev a2)
Subsystem: ASRock Incorporation Device [1849:03d0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at dd000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at df7c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_UY.UTF-8, LC_CTYPE=es_UY.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-9 GRand Unified Bootloader, version
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
Reply to: