Bug#496871: I guess they are disabled for server performance reasons...
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-4
Followup-For: Bug #496871
I guess the preemption settings are disabled for slowing down servers, it
would be more apropriate to implement what is said on bug "#497755 - Separate
desktop and server kernels".
Would be nice to have something like that...
Thanks!!!
P.s.: maybe this bug should be merged with 497755.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC 2008
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-amd64 root=UUID=c662531d-951e-4c01-a372-3212249feb65 ro
** Tainted: P (1)
** Kernel log:
[ 1.307989] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 1.307989] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 1.307989] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 1.307989] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 1.835922] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:73:08:b8
[ 1.835922] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
[ 1.835922] sata_nv 0000:00:08.0: version 3.5
[ 1.835922] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 1.835922] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 1.835922] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 1.835922] scsi0 : sata_nv
[ 1.835922] scsi1 : sata_nv
[ 1.835922] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20
[ 1.835922] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20
[ 2.308035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.319852] ata1.00: ATA-7: SAMSUNG HD160JJ, ZM100-47, max UDMA7
[ 2.319852] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.363895] ata1.00: configured for UDMA/133
[ 2.690238] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.691836] isa bounce pool size: 16 pages
[ 2.691836] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ ZM10 PQ: 0 ANSI: 5
[ 2.691836] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 2.691836] ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 2.691836] PCI: Setting latency timer of device 0000:00:08.1 to 64
[ 2.691836] scsi2 : sata_nv
[ 2.691836] scsi3 : sata_nv
[ 2.695841] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23
[ 2.695841] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23
[ 3.038155] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.378239] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.383847] Uniform Multi-Platform E-IDE driver
[ 3.383886] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.384516] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[ 3.384555] NFORCE-MCP61: IDE controller (0x10de:0x03ec rev 0xa2) at PCI slot 0000:00:06.0
[ 3.384619] NFORCE-MCP61: not 100% native mode: will probe irqs later
[ 3.389929] NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling workaround.
[ 3.389976] NFORCE-MCP61: IDE port disabled
[ 3.390011] ide0: BM-DMA at 0xffa0-0xffa7
[ 3.390045] Probing IDE interface ide0...
[ 4.122240] hda: SONY DVD RW DRU-830A, ATAPI CD/DVD-ROM drive
[ 4.794216] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.794542] hda: drive side 80-wire cable detection failed, limiting max speed to UDMA33
[ 4.794588] hda: UDMA/33 mode selected
[ 4.794983] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.809828] Driver 'sd' needs updating - please use bus_type methods
[ 4.809942] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.809987] sd 0:0:0:0: [sda] Write Protect is off
[ 4.810021] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.810031] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.810031] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.810031] sd 0:0:0:0: [sda] Write Protect is off
[ 4.810031] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.810031] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.810087] sda: sda1 sda2 sda3 <<6>hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 4.826125] Uniform CD-ROM driver Revision: 3.20
[ 4.826125] sda5 sda6 sda7 sda8 >
[ 4.858042] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.186119] PM: Starting manual resume from disk
[ 5.192007] ReiserFS: sda8: found reiserfs format "3.6" with standard journal
[ 5.192052] ReiserFS: sda8: using ordered data mode
[ 5.198127] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.198127] ReiserFS: sda8: checking transaction log (sda8)
[ 5.230248] ReiserFS: sda8: Using r5 hash to sort names
[ 6.544272] udevd version 125 started
[ 7.524596] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 7.524596] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[ 7.700594] input: PC Speaker as /class/input/input2
[ 7.856612] input: Power Button (FF) as /class/input/input3
[ 7.906182] ACPI: Power Button (FF) [PWRF]
[ 7.906296] input: Power Button (CM) as /class/input/input4
[ 7.933649] ACPI: Power Button (CM) [PWRB]
[ 8.117813] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
[ 8.177842] pnp: the driver 'parport_pc' has been registered
[ 8.177842] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.177842] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 8.253733] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 8.253733] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 8.253733] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 8.265766] parport_pc 00:06: driver attached
[ 8.276773] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.301729] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 10.165713] Adding 522072k swap on /dev/sda5. Priority:-1 extents:1 across:522072k
[ 19.209561] loop: module loaded
[ 19.233550] w83627ehf: Found W83627EHG chip at 0x290
[ 19.625714] fuse init (API version 7.9)
[ 19.996470] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.072439] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.734896] PPP generic driver version 2.4.2
[ 20.853200] NET: Registered protocol family 10
[ 20.853200] lo: Disabled Privacy Extensions
[ 24.033231] ACPI: WMI: Mapper loaded
[ 24.541258] lp0: using parport0 (interrupt-driven).
[ 24.557258] ppdev: user-space parallel port driver
[ 26.143726] NET: Registered protocol family 24
[ 31.608344] eth0: no IPv6 routers present
[ 33.512202] nvidia: module license 'NVIDIA' taints kernel.
[ 33.765989] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
[ 33.765995] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LMC9] -> GSI 21 (level, low) -> IRQ 21
[ 33.766002] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 33.766151] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.12 Thu Jul 17 18:10:24 PDT 2008
** Loaded modules:
Module Size Used by
nvidia 8104816 24
pppoe 14976 2
pppox 7960 1 pppoe
ppdev 11656 0
lp 14724 0
video 24084 0
output 7808 1 video
battery 16904 0
container 8320 0
wmi 11712 0
sbs 17808 0
sbshc 10368 1 sbs
ac 9352 0
ipv6 288200 20
ppp_generic 27816 6 pppoe,pppox
slhc 10112 1 ppp_generic
nls_utf8 6272 2
nls_cp437 11136 2
vfat 14976 2
fat 51128 1 vfat
nls_base 12932 4 nls_utf8,nls_cp437,vfat,fat
fuse 53184 2
eeprom 10640 0
w83627ehf 26512 0
hwmon_vid 7296 1 w83627ehf
loop 19468 0
snd_hda_intel 434776 3
snd_pcm_oss 41760 0
snd_mixer_oss 18816 1 snd_pcm_oss
snd_pcm 81800 3 snd_hda_intel,snd_pcm_oss
snd_timer 25744 1 snd_pcm
snd 63688 10 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 12064 1 snd
parport_pc 31016 1
parport 41776 3 ppdev,lp,parport_pc
button 11680 0
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
psmouse 42268 0
serio_raw 9860 0
pcspkr 7040 0
evdev 14208 3
i2c_nforce2 10752 0
i2c_core 27936 3 nvidia,eeprom,i2c_nforce2
k8temp 9216 0
reiserfs 211072 1
ide_cd_mod 36360 0
cdrom 37928 1 ide_cd_mod
sd_mod 29376 6
ide_pci_generic 9220 0 [permanent]
amd74xx 13448 0 [permanent]
ide_core 128284 3 ide_cd_mod,ide_pci_generic,amd74xx
floppy 61672 0
sata_nv 27528 5
ata_generic 10116 0
libata 165472 2 sata_nv,ata_generic
scsi_mod 160760 2 sd_mod,libata
dock 14112 1 libata
forcedeth 54032 0
ohci_hcd 25092 0
ehci_hcd 36108 0
thermal 22688 0
processor 42304 1 thermal
fan 9352 0
thermal_sys 17728 4 video,thermal,processor,fan
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
Subsystem: ASRock Incorporation Device [1849:03ea]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev a2)
Subsystem: ASRock Incorporation Device [1849:03e0]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
Subsystem: ASRock Incorporation Device [1849:03eb]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=64]
Region 4: I/O ports at 5000 [size=64]
Region 5: I/O ports at 6000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
Subsystem: ASRock Incorporation Device [1849:03eb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f1] (rev a3) (prog-if 10)
Subsystem: ASRock Incorporation Device [1849:03f1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df7ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f2] (rev a3) (prog-if 20)
Subsystem: ASRock Incorporation Device [1849:03f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at df7fec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
Subsystem: ASRock Incorporation Device [1849:3662]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at df7f8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device [1849:03ec]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: ata_generic, amd74xx, ide-pci-generic
00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2)
Subsystem: ASRock Incorporation Device [1849:03ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 1276
Region 0: Memory at df7fd000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d480 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASRock Incorporation Device [1849:03f6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d080 [size=4]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at c880 [size=16]
Region 5: Memory at df7fc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv, ata_generic, ide-pci-generic
00:08.1 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASRock Incorporation Device [1849:03f6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at c800 [size=8]
Region 1: I/O ports at c480 [size=4]
Region 2: I/O ports at c400 [size=8]
Region 3: I/O ports at c080 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: Memory at df7f7000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv, ata_generic, ide-pci-generic
00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: df800000-dfffffff
Prefetchable memory behind bridge: 00000000da000000-00000000dcffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0d.0 VGA compatible controller [0300]: nVidia Corporation GeForce 6150SE nForce 430 [10de:03d0] (rev a2)
Subsystem: ASRock Incorporation Device [1849:03d0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at dd000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at df7c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_UY.UTF-8, LC_CTYPE=es_UY.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-9 GRand Unified Bootloader, version
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
Reply to: