--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.23-1-686: USB detection problem
- From: Rafael <EagleScreen@gmail.com>
- Date: Fri, 11 Jan 2008 08:24:04 +0100
- Message-id: <20080111072404.3755.41325.reportbug@rafadeb.casa>
Package: linux-image-2.6.23-1-686
Version: 2.6.23-2
Severity: important
Kernel only detect USB devices conected at system boot.
If i conect a USB device when the system is booted, 'lsusb' command does not list it, but some devices work when they are not listed in 'lsusb' while other does not
work.
I think this is a bug of Debian kernel, becouse if I install a Ubuntu kernel in Debian, everything work well.
-- Package-specific info:
** Version:
Linux version 2.6.23-1-686 (Debian 2.6.23-2) (maks@debian.org) (gcc version 4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #1 SMP Fri Dec 21 13:57:07 UTC 2007
** cmdline:
root=/dev/sda1 ro vga=788
** Not tainted
** Kernel log:
sd 0:0:1:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
usb 3-2: configuration #1 chosen from 1 choice
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.102
Linux video capture interface: v2.00
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
agpgart: Detected SiS chipset - id:1606
agpgart: AGP aperture is 64M @ 0xd8000000
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 22
bttv0: Bt878 (rev 2) at 0000:00:0a.0, irq: 22, latency: 32, mmio: 0xdf000000
parport0: Printer, HEWLETT-PACKARD DESKJET 710C
bttv0: detected: AVermedia TVCapture 98 [card=13], PCI subsystem ID is 1461:0002
bttv0: using: AVerMedia TVCapture 98 [card=13,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=000477c3 [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [11]
bttv0: Avermedia eeprom[0x4011]: tuner=5 radio:no remote control:yes
bttv0: tuner type=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for MSP34xx (alternate address) @ 0x88... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
input: bttv IR (card=13) as /class/input/input5
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 18 (level, low) -> IRQ 22
bt878_probe: card id=[0x21461], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:00:0a.1 disabled
bt878: probe of 0000:00:0a.1 failed with error -22
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 19
Adding 2546260k swap on /dev/sda9. Priority:-1 extents:1 across:2546260k
EXT3 FS on sda1, internal journal
loop: module loaded
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
fuse init (API version 7.8)
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: setting half-duplex.
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[drm] Initialized radeon 1.28.0 20060524 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
usb 4-5: new high speed USB device using ehci_hcd and address 4
usb 4-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access VBTM Store 'n' Go 1.02 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdc] 2013184 512-byte hardware sectors (1031 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] 2013184 512-byte hardware sectors (1031 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg3 type 0
usb 4-5: USB disconnect, address 4
** Loaded modules:
Module Size Used by
nls_iso8859_1 4160 0
nls_cp437 5824 0
vfat 12256 0
fat 48540 1 vfat
usb_storage 77056 0
appletalk 33600 2
ax25 49904 2
ipx 26116 2
p8023 2144 1 ipx
ipv6 242788 8
radeon 112512 2
drm 75668 3 radeon
ipt_MASQUERADE 3712 1
iptable_nat 6980 1
ip_tables 13220 1 iptable_nat
nf_nat 18668 2 ipt_MASQUERADE,iptable_nat
x_tables 14308 3 ipt_MASQUERADE,iptable_nat,ip_tables
nf_conntrack_ipv4 17448 2 iptable_nat
nf_conntrack 62056 4 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
nfnetlink 5816 3 nf_nat,nf_conntrack_ipv4,nf_conntrack
binfmt_misc 11272 1
ppdev 8836 0
lp 11140 0
speedstep_lib 5220 0
cpufreq_userspace 4292 0
cpufreq_powersave 1856 0
cpufreq_ondemand 8332 0
cpufreq_stats 5184 0
freq_table 4544 2 cpufreq_ondemand,cpufreq_stats
cpufreq_conservative 6952 0
fuse 41876 5
dm_snapshot 16932 0
dm_mirror 21632 0
dm_mod 52640 2 dm_snapshot,dm_mirror
loop 17092 0
snd_ens1371 24448 3
gameport 15112 1 snd_ens1371
snd_seq_dummy 3812 0
snd_seq_oss 29440 0
snd_seq_midi 8192 0
snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
snd_seq 46544 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
bt878 10584 0
snd_rawmidi 22656 2 snd_ens1371,snd_seq_midi
snd_seq_device 7852 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd_ac97_codec 92388 1 snd_ens1371
ac97_bus 2336 1 snd_ac97_codec
snd_pcm_oss 39104 0
snd_mixer_oss 15296 2 snd_pcm_oss
snd_pcm 72132 3 snd_ens1371,snd_ac97_codec,snd_pcm_oss
tuner 60424 0
snd_timer 21156 2 snd_seq,snd_pcm
tvaudio 22460 0
snd 48356 14 snd_ens1371,snd_seq_oss,snd_seq,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
bttv 165684 1 bt878
video_buf 23588 1 bttv
firmware_class 9472 1 bttv
button 8336 0
soundcore 7584 2 snd
ir_common 34212 1 bttv
parport_pc 34020 1
parport 34088 3 ppdev,lp,parport_pc
compat_ioctl32 1440 1 bttv
i2c_algo_bit 5988 1 bttv
snd_page_alloc 10088 1 snd_pcm
btcx_risc 4808 1 bttv
tveeprom 15024 1 bttv
sis_agp 9124 1
i2c_sis96x 5188 0
videodev 26688 1 bttv
v4l2_common 16704 4 tuner,tvaudio,bttv,videodev
v4l1_compat 13220 2 bttv,videodev
agpgart 31624 2 drm,sis_agp
i2c_core 23264 6 tuner,tvaudio,bttv,i2c_algo_bit,tveeprom,i2c_sis96x
shpchp 31028 0
pci_hotplug 28128 1 shpchp
pcspkr 3264 0
rtc 12984 0
evdev 9472 4
tsdev 8160 0
ext3 121544 1
jbd 55368 1 ext3
mbcache 8320 1 ext3
sg 32572 0
sr_mod 16420 0
cdrom 32608 1 sr_mod
sd_mod 27424 6
sis5513 12040 0 [permanent]
generic 4804 0 [permanent]
ide_core 112484 3 usb_storage,sis5513,generic
usbhid 27232 0
hid 26944 1 usbhid
pata_sis 13732 4
ehci_hcd 31372 0
ata_generic 7588 0
8139too 25280 0
ohci_hcd 20324 0
3c59x 41416 0
libata 113488 2 pata_sis,ata_generic
floppy 54820 0
8139cp 22144 0
mii 5344 3 8139too,3c59x,8139cp
usbcore 130568 5 usb_storage,usbhid,ehci_hcd,ohci_hcd
scsi_mod 136684 5 usb_storage,sg,sr_mod,sd_mod,libata
thermal 15580 0
processor 34696 1 thermal
fan 5092 0
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] SiS645DX Host & Memory & AGP Controller [1039:0646]
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8081]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) [1039:0001] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: d7000000-d7ffffff
Prefetchable memory behind bridge: e0000000-febfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] [1039:0962] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at e600 [size=32]
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:807a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Interrupt: pin ? routed to IRQ 19
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at a400 [size=16]
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.0 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:807a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.0 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:807a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d5800000 (32-bit, non-prefetchable) [size=4K]
00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.0 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:807a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:807a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 21
Region 0: Memory at d4800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:08.0 Multimedia audio controller [0401]: Ensoniq ES1371 [AudioPCI-97] [1274:1371] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128 [1274:1371]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 8400 [size=64]
Capabilities: <access denied>
00:0a.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 02)
Subsystem: Avermedia Technologies Inc TV98 Series (TV/No FM/Remote) [1461:0002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df000000 (32-bit, prefetchable) [size=4K]
00:0a.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 02)
Subsystem: Avermedia Technologies Inc Avermedia PCTV98 Audio Capture [1461:0002]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 22
Region 0: Memory at de800000 (32-bit, prefetchable) [size=4K]
00:0b.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX [Cyclone] [10b7:9055] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 8000 [size=128]
Region 1: Memory at d3800000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 70000000 [disabled] [size=128K]
Capabilities: <access denied>
00:0c.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Allied Telesyn International AT-2500TX/ACPI [1259:2503]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 7800 [size=256]
Region 1: Memory at d3000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd Unknown device [148c:2093]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at d7800000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01)
Subsystem: C.P. Technology Co. Ltd Unknown device [148c:2092]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d7000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.23-1-686 (SMP w/1 CPU core)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.23-1-686 depends on:
ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
linux-image-2.6.23-1-686 recommends no packages.
-- debconf information:
linux-image-2.6.23-1-686/preinst/elilo-initrd-2.6.23-1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.23-1-686/preinst/overwriting-modules-2.6.23-1-686: true
linux-image-2.6.23-1-686/prerm/removing-running-kernel-2.6.23-1-686: true
linux-image-2.6.23-1-686/preinst/already-running-this-2.6.23-1-686:
linux-image-2.6.23-1-686/preinst/initrd-2.6.23-1-686:
linux-image-2.6.23-1-686/postinst/old-system-map-link-2.6.23-1-686: true
linux-image-2.6.23-1-686/preinst/abort-overwrite-2.6.23-1-686:
linux-image-2.6.23-1-686/preinst/abort-install-2.6.23-1-686:
linux-image-2.6.23-1-686/postinst/create-kimage-link-2.6.23-1-686: true
linux-image-2.6.23-1-686/postinst/depmod-error-2.6.23-1-686: false
linux-image-2.6.23-1-686/postinst/old-dir-initrd-link-2.6.23-1-686: true
linux-image-2.6.23-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.23-1-686/preinst/failed-to-move-modules-2.6.23-1-686:
linux-image-2.6.23-1-686/preinst/bootloader-initrd-2.6.23-1-686: true
linux-image-2.6.23-1-686/preinst/lilo-initrd-2.6.23-1-686: true
linux-image-2.6.23-1-686/prerm/would-invalidate-boot-loader-2.6.23-1-686: true
linux-image-2.6.23-1-686/postinst/old-initrd-link-2.6.23-1-686: true
linux-image-2.6.23-1-686/postinst/bootloader-error-2.6.23-1-686:
linux-image-2.6.23-1-686/postinst/bootloader-test-error-2.6.23-1-686:
linux-image-2.6.23-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.23-1-686/postinst/depmod-error-initrd-2.6.23-1-686: false
--- End Message ---