[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#497713: linux-image-2.6.26-1-686-bigmem: Reading speed regression when using firewire external disks



Package: linux-image-2.6.26-1-686-bigmem
Version: 2.6.26-3
Severity: important


I'm using a Maxtor One Touch 4 Plus 1TB External disk connected over
firewire for 4 months. Until 2.6.26, this disk was steadily reading
38MB/Sec and writing 26MB/Sec.

When I installed 2.6.26, reading speed dropped to a steady 24MB/Sec
while writing speed is unchanged.

Unfortunately, I've upgraded my motherboard's BIOS same day but since
the firewire connector on my audigy2ZS is reporting similar speeds with
the connector on the motherboard, I'm confident that the problem is not
BIOS related.

System is running on an Intel Core2Quad Q6600 with P35 chipset (MSI P35
Platinum) and 4GB RAM.

-- Package-specific info:
** Version:
Linux version 2.6.26-1-686-bigmem (Debian 2.6.26-3) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Aug 20 13:43:08 UTC 2008

** Command line:
root=/dev/sda1 ro vga=794 

** Tainted: P W (513)

** Kernel log:
[25800.513602]  [<f8eaa51b>] __ext3_get_inode_loc+0xcf/0x26c [ext3]
[25800.513613]  [<c018c9ca>] __d_lookup+0x98/0xd7
[25800.513623]  [<f8eafbc5>] ext3_lookup+0x21/0x9b [ext3]
[25800.513734]  [<c01841ef>] do_lookup+0xb6/0x153
[25800.513742]  [<c0185de1>] __link_path_walk+0x724/0xb0b
[25800.513748]  [<c0190654>] mntput_no_expire+0x13/0xd9
[25800.513759]  [<c01861ff>] path_walk+0x37/0x70
[25800.513765]  [<c01864ae>] do_path_lookup+0x122/0x184
[25800.513771]  [<c0186d0b>] __user_walk_fd+0x29/0x3a
[25800.513777]  [<c0180df5>] vfs_lstat_fd+0x12/0x39
[25800.513790]  [<c0180e89>] sys_lstat64+0xf/0x23
[25800.513794]  [<c01e6e1e>] _atomic_dec_and_lock+0x2a/0x44
[25800.513798]  [<c018c256>] dput+0x25/0xbb
[25800.513803]  [<c0190654>] mntput_no_expire+0x13/0xd9
[25800.513808]  [<c017c781>] filp_close+0x4d/0x53
[25800.513813]  [<c017d8bb>] sys_close+0x5b/0x8d
[25800.513817]  [<c0108853>] sysenter_past_esp+0x78/0xb1
[25800.513826]  [<c02c0000>] pciserial_init_one+0x1d/0x100
[25800.513833]  =======================
[25800.513834] ---[ end trace 880cd33b043b8688 ]---
[25800.513839] Buffer I/O error on device sdc1, logical block 0
[25800.513841] lost page write due to I/O error on sdc1
[25801.365778] ieee1394: sbp2: Logged into SBP-2 device
[25801.365836] ieee1394: sbp2: Node 1-00:1023: Max speed [S400] - Max payload [2048]
[25801.367600] scsi 10:0:0:0: Direct-Access     Maxtor   OneTouch         0121 PQ: 0 ANSI: 4
[25801.368076] sd 10:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
[25801.371599] sd 10:0:0:0: [sde] Write Protect is off
[25801.371599] sd 10:0:0:0: [sde] Mode Sense: 2d 08 00 00
[25801.371599] sd 10:0:0:0: [sde] Got wrong page
[25801.371599] sd 10:0:0:0: [sde] Assuming drive cache: write through
[25801.371599] sd 10:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
[25801.371599] sd 10:0:0:0: [sde] Write Protect is off
[25801.371599] sd 10:0:0:0: [sde] Mode Sense: 2d 08 00 00
[25801.375599] sd 10:0:0:0: [sde] Got wrong page
[25801.375599] sd 10:0:0:0: [sde] Assuming drive cache: write through
[25801.375599]  sde: sde1
[25801.403600] sd 10:0:0:0: [sde] Attached SCSI disk
[25801.403600] sd 10:0:0:0: Attached scsi generic sg2 type 0
[25802.811654] hiddev96hidraw3: USB HID v1.01 Device [PHILIPS PHILIPS VOIP321] on usb-0000:00:1d.2-1
[25802.811654] usb 6-1: New USB device found, idVendor=0471, idProduct=082f
[25802.811654] usb 6-1: New USB device strings: Mfr=4, Product=20, SerialNumber=52
[25802.811654] usb 6-1: Product: PHILIPS VOIP321
[25802.811654] usb 6-1: Manufacturer: PHILIPS
[25802.811654] usb 6-1: SerialNumber: USBGAP0000000000000000000187196782
[25802.811654] usb 7-1: USB disconnect, address 4
[25803.363275] usb 7-1: new full speed USB device using uhci_hcd and address 5
[25803.570844] usb 7-1: configuration #1 chosen from 1 choice
[25803.579757] usb 7-1: New USB device found, idVendor=0a12, idProduct=0001
[25803.579757] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[26557.888414] EXT3-fs error (device sdc1): ext3_readdir: directory #2 contains a hole at offset 0
[26557.888789] Buffer I/O error on device sdc1, logical block 0
[26557.888794] lost page write due to I/O error on sdc1
[26557.888811] EXT3-fs error (device sdc1): ext3_get_inode_loc: unable to read inode block - inode=2, block=62
[26557.889142] Buffer I/O error on device sdc1, logical block 0
[26557.889147] lost page write due to I/O error on sdc1
[26557.889153] EXT3-fs error (device sdc1) in ext3_reserve_inode_write: IO failure
[26557.889483] Buffer I/O error on device sdc1, logical block 0
[26557.889488] lost page write due to I/O error on sdc1
[26564.455371] journal_bmap: journal block not found at offset 31 on sdc1
[26564.455378] Aborting journal on device sdc1.
[26564.455386] Buffer I/O error on device sdc1, logical block 587
[26564.455391] lost page write due to I/O error on sdc1
[26578.296956] Buffer I/O error on device sdc1, logical block 587
[26578.296962] lost page write due to I/O error on sdc1
[26578.297311] Buffer I/O error on device sdc1, logical block 0
[26578.297316] lost page write due to I/O error on sdc1
[26581.714838] kjournald starting.  Commit interval 5 seconds
[26581.714838] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[26581.714838] EXT3 FS on sde1, internal journal
[26581.714838] EXT3-fs: recovery complete.
[26581.718614] EXT3-fs: mounted filesystem with ordered data mode.
[29423.526000] usb 8-8: new high speed USB device using ehci_hcd and address 8
[29423.752066] usb 8-8: configuration #1 chosen from 1 choice
[29423.754447] scsi11 : SCSI emulation for USB Mass Storage devices
[29423.754454] usb-storage: device found at 8
[29423.754454] usb-storage: waiting for device to settle before scanning
[29423.754447] usb 8-8: New USB device found, idVendor=1058, idProduct=0702
[29423.754447] usb 8-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[29423.754447] usb 8-8: Product: External HDD    
[29423.754447] usb 8-8: Manufacturer: Western Digital 
[29423.754447] usb 8-8: SerialNumber: 5758455A3037433833333637
[29431.035706] usb-storage: device scan complete
[29431.036907] scsi 11:0:0:0: Direct-Access     WD       3200BEV External 1.04 PQ: 0 ANSI: 4
[29431.038406] sd 11:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[29431.038406] sd 11:0:0:0: [sdc] Write Protect is off
[29431.038407] sd 11:0:0:0: [sdc] Mode Sense: 21 00 00 00
[29431.038407] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[29431.038407] sd 11:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[29431.038407] sd 11:0:0:0: [sdc] Write Protect is off
[29431.038407] sd 11:0:0:0: [sdc] Mode Sense: 21 00 00 00
[29431.038407] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[29431.038407]  sdc: sdc1
[29431.104792] sd 11:0:0:0: [sdc] Attached SCSI disk
[29431.104792] sd 11:0:0:0: Attached scsi generic sg5 type 0
[29435.778144] kjournald starting.  Commit interval 5 seconds
[29435.778722] EXT3 FS on sdc1, internal journal
[29435.778730] EXT3-fs: mounted filesystem with ordered data mode.
[37317.639501] usb 8-8: USB disconnect, address 8
[37367.778704] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[37999.149804] sr0: CDROM not ready.  Make sure there is a disc in the drive.

** Loaded modules:
Module                  Size  Used by
nls_utf8                2528  0 
nls_cp437               6336  0 
vfat                    9920  0 
fat                    41632  1 vfat
nls_base                7588  4 nls_utf8,nls_cp437,vfat,fat
usb_storage            76576  0 
nvidia               7087428  24 
rfcomm                 29040  4 
l2cap                  18016  9 rfcomm
nfsd                  187472  13 
lockd                  55016  1 nfsd
nfs_acl                 3680  1 nfsd
auth_rpcgss            34752  1 nfsd
sunrpc                162944  11 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs                4672  1 nfsd
ppdev                   7236  0 
parport_pc             23396  0 
lp                      8932  0 
parport                31756  3 ppdev,parport_pc,lp
video                  17168  0 
output                  3680  1 video
ac                      4032  0 
battery                 7040  0 
acpi_cpufreq            7564  3 
cpufreq_userspace       4420  0 
cpufreq_stats           4640  0 
cpufreq_powersave       2624  0 
cpufreq_ondemand        7244  1 
freq_table              5088  3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative     6728  0 
microcode               9772  0 
ipv6                  235748  24 
fuse                   43676  1 
vboxdrv                64768  0 
coretemp                6272  0 
f71882fg                9032  0 
loop                   13516  0 
snd_usb_audio          71104  0 
snd_usb_lib            14208  1 snd_usb_audio
snd_emu10k1_synth       6432  0 
snd_emux_synth         28704  1 snd_emu10k1_synth
snd_seq_virmidi         5664  1 snd_emux_synth
snd_seq_midi_emul       6144  1 snd_emux_synth
tuner_simple           12848  1 
tuner_types            14656  1 tuner_simple
tuner                  22728  0 
snd_emu10k1           116000  4 snd_emu10k1_synth
firmware_class          7584  2 microcode,snd_emu10k1
snd_ac97_codec         89252  1 snd_emu10k1
ac97_bus                2496  1 snd_ac97_codec
snd_pcm_oss            33568  0 
snd_mixer_oss          13088  1 snd_pcm_oss
snd_pcm                63460  5 snd_usb_audio,snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_util_mem            4800  2 snd_emux_synth,snd_emu10k1
snd_hwdep               6980  3 snd_usb_audio,snd_emux_synth,snd_emu10k1
snd_seq_dummy           3428  0 
snd_seq_oss            25760  0 
snd_seq_midi            6496  0 
snd_rawmidi            19328  4 snd_usb_lib,snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq_midi_event      7200  3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
saa7134               126388  0 
snd_seq                42224  10 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
videodev               28288  2 tuner,saa7134
v4l1_compat            13028  1 videodev
snd_timer              18568  3 snd_emu10k1,snd_pcm,snd_seq
compat_ioctl32          2080  1 saa7134
snd_seq_device          7148  8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
v4l2_common            11008  2 tuner,saa7134
videobuf_dma_sg        11972  1 saa7134
videobuf_core          16868  2 saa7134,videobuf_dma_sg
ir_kbd_i2c              7888  1 saa7134
hci_usb                13020  2 
snd                    46372  20 snd_usb_audio,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ir_common              40388  2 saa7134,ir_kbd_i2c
iTCO_wdt               10276  0 
bluetooth              45668  7 rfcomm,l2cap,hci_usb
emu10k1_gp              3552  0 
psmouse                33104  0 
pcspkr                  3200  0 
tveeprom               11748  1 saa7134
i2c_i801                8688  0 
snd_page_alloc          8648  2 snd_emu10k1,snd_pcm
button                  6832  0 
serio_raw               5508  0 
i2c_core               20596  8 nvidia,tuner_simple,tuner,saa7134,v4l2_common,ir_kbd_i2c,tveeprom,i2c_i801
intel_agp              23236  0 
soundcore               7136  1 snd
gameport               11468  2 emu10k1_gp
agpgart                29576  2 nvidia,intel_agp
evdev                   8768  5 
joydev                  9248  0 
ext3                  105992  5 
jbd                    40212  1 ext3
mbcache                 7876  1 ext3
sg                     27732  0 
sr_mod                 14084  0 
cdrom                  30944  1 sr_mod
sd_mod                 22968  10 
sbp2                   19724  1 
ata_piix               15012  5 
ata_generic             5444  0 
libata                141280  2 ata_piix,ata_generic
scsi_mod              130124  6 usb_storage,sg,sr_mod,sd_mod,sbp2,libata
dock                    9040  1 libata
usbhid                 36736  0 
hid                    33952  1 usbhid
ff_memless              5160  1 usbhid
ohci1394               26000  1 
ieee1394               76600  2 sbp2,ohci1394
floppy                 48516  0 
ide_pci_generic         4676  0 [permanent]
ide_core               93460  1 ide_pci_generic
r8169                  24612  0 
ehci_hcd               29420  0 
uhci_hcd               19504  0 
usbcore               119152  8 usb_storage,snd_usb_audio,snd_usb_lib,hci_usb,usbhid,ehci_hcd,uhci_hcd
thermal                15996  0 
processor              33536  2 acpi_cpufreq,thermal
fan                     4932  0 
thermal_sys            11624  4 video,thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fa000000-fe9fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at bc00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at b880 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fea00000-feafffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at b800 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at b480 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at b400 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at b080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: feb00000-febfffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel modules: iTCO_wdt

00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at b000 [size=8]
	Region 1: I/O ports at ac00 [size=4]
	Region 2: I/O ports at a880 [size=8]
	Region 3: I/O ports at a800 [size=4]
	Region 4: I/O ports at a480 [size=16]
	Region 5: I/O ports at a400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0400 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at a000 [size=8]
	Region 1: I/O ports at 9c00 [size=4]
	Region 2: I/O ports at 9880 [size=8]
	Region 3: I/O ports at 9800 [size=4]
	Region 4: I/O ports at 9480 [size=16]
	Region 5: I/O ports at 9400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix

01:00.0 VGA compatible controller [0300]: nVidia Corporation G80 [GeForce 8800 GTS] [10de:0193] (rev a2)
	Subsystem: nVidia Corporation Device [10de:0421]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at cc00 [size=128]
	[virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nvidiafb, nvidia

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:345c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 219
	Region 0: I/O ports at d800 [size=256]
	Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at feac0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

05:00.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04)
	Subsystem: Creative Labs Device [1102:2002]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at ec00 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: EMU10K1_Audigy
	Kernel modules: snd-emu10k1

05:00.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 04)
	Subsystem: Creative Labs Device [1102:0040]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Region 0: I/O ports at e880 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: Emu10k1_gameport
	Kernel modules: emu10k1-gp

05:00.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04) (prog-if 10)
	Subsystem: Creative Labs Device [1102:0010]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at febf8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394

05:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
	Subsystem: Animation Technologies Inc. Device [5168:0138]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (4000ns min, 10000ns max)
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at febff400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: saa7134
	Kernel modules: saa7134

05:02.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) (prog-if 10)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:345d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at febfe800 (32-bit, non-prefetchable) [size=2K]
	Region 1: I/O ports at e800 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686-bigmem depends on:
ii  debconf [debconf-2.0]         1.5.22     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92f      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686-bigmem recommends:
ii  libc6-i686                    2.7-13     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686-bigmem suggests:
ii  grub                          0.97-46    GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.26              <none>     (no description available)

-- debconf information:
  linux-image-2.6.26-1-686-bigmem/preinst/elilo-initrd-2.6.26-1-686-bigmem: true
  linux-image-2.6.26-1-686-bigmem/postinst/create-kimage-link-2.6.26-1-686-bigmem: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-1-686-bigmem/preinst/overwriting-modules-2.6.26-1-686-bigmem: true
  linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-initrd-2.6.26-1-686-bigmem: false
  linux-image-2.6.26-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.26-1-686-bigmem: true
  linux-image-2.6.26-1-686-bigmem/postinst/old-initrd-link-2.6.26-1-686-bigmem: true
  linux-image-2.6.26-1-686-bigmem/postinst/bootloader-error-2.6.26-1-686-bigmem:
  linux-image-2.6.26-1-686-bigmem/preinst/initrd-2.6.26-1-686-bigmem:
  linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-2.6.26-1-686-bigmem: false
  linux-image-2.6.26-1-686-bigmem/postinst/old-dir-initrd-link-2.6.26-1-686-bigmem: true
  linux-image-2.6.26-1-686-bigmem/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-1-686-bigmem/postinst/bootloader-test-error-2.6.26-1-686-bigmem:
  linux-image-2.6.26-1-686-bigmem/postinst/old-system-map-link-2.6.26-1-686-bigmem: true
  linux-image-2.6.26-1-686-bigmem/prerm/removing-running-kernel-2.6.26-1-686-bigmem: true
  linux-image-2.6.26-1-686-bigmem/postinst/kimage-is-a-directory:
  linux-image-2.6.26-1-686-bigmem/preinst/failed-to-move-modules-2.6.26-1-686-bigmem:
  linux-image-2.6.26-1-686-bigmem/preinst/abort-overwrite-2.6.26-1-686-bigmem:
  linux-image-2.6.26-1-686-bigmem/preinst/abort-install-2.6.26-1-686-bigmem:
  linux-image-2.6.26-1-686-bigmem/preinst/lilo-initrd-2.6.26-1-686-bigmem: true
  linux-image-2.6.26-1-686-bigmem/preinst/bootloader-initrd-2.6.26-1-686-bigmem: true



Reply to: