Bug#495697: linux-image-2.6.25-2-686: System hang when loading ACPI video module
Package: linux-image-2.6.25-2-686
Version: 2.6.25-7
Severity: important
System hangs when loading ACPI video kernel module. The system freezes
completely. Making sure video.ko is not loaded via
/etc/modprobe.d/blacklist is a workaround to this problem.
As a general note: The system in question is a Samsung P55-Pro Notebook,
hw details can be found below.
The graphics chipset is an Intel X3100 (GM965), if that is not clear
from the lspci output.
linux-image-2.6.24-1-686 is also affected by this problem.
-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-7) (maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008
** Command line:
root=/dev/sda5 ro quiet
** Not tainted
** Kernel log:
[ 8.354544] agpgart: Detected 7676K stolen memory.
[ 8.368750] agpgart: AGP aperture is 256M @ 0xd0000000
[ 8.253094] ACPI: AC Adapter [ADP1] (off-line)
[ 8.302298] input: Power Button (FF) as /class/input/input1
[ 8.359625] ACPI: Power Button (FF) [PWRF]
[ 8.359762] input: Lid Switch as /class/input/input2
[ 8.391716] ACPI: Lid Switch [LID0]
[ 8.391793] input: Power Button (CM) as /class/input/input3
[ 8.455635] ACPI: Power Button (CM) [PWRB]
[ 8.455716] input: Sleep Button (CM) as /class/input/input4
[ 8.519638] ACPI: Sleep Button (CM) [SLPB]
[ 8.764969] ACPI: Battery Slot [BAT1] (battery present)
[ 8.971298] ACPI: WMI: Mapper loaded
[ 9.380657] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 9.380766] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 9.380809] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.445859] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
[ 9.445864] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 9.446001] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 9.446019] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 9.446042] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 9.522737] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 9.573248] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.833036] input: PC Speaker as /class/input/input5
[ 9.887700] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 9.887745] rtc0: alarms up to one month, y3k
[ 9.984504] NET: Registered protocol family 23
[ 10.252574] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 10.252638] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
[ 10.013475] Yenta: CardBus bridge found at 0000:0a:09.0 [144d:c030]
[ 10.252763] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 10.252793] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 10.288799] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
[ 10.057660] tpm_inf_pnp 00:0b: Found TPM with ID IFX0102
[ 10.057720] tpm_inf_pnp 00:0b: TPM found: config base 0x4e, data base 0x4700, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 10.140392] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[ 10.140397] Socket status: 30000006
[ 10.140401] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 10.140407] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 10.140411] cs: IO port probe 0x2000-0x2fff: clean.
[ 10.143827] pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
[ 10.143831] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 10.538470] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04711/0x200000
[ 10.573685] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 10.859570] cs: IO port probe 0x100-0x3af: clean.
[ 10.860313] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 10.861191] cs: IO port probe 0x820-0x8ff: clean.
[ 10.861939] cs: IO port probe 0xc00-0xcf7: clean.
[ 10.862849] cs: IO port probe 0xa00-0xaff: clean.
[ 12.396846] Adding 2000084k swap on /dev/sda3. Priority:-1 extents:1 across:2000084k
[ 13.798064] loop: module loaded
[ 14.411305] XFS mounting filesystem sda6
[ 14.722832] Ending clean XFS mount for filesystem: sda6
[ 21.815244] lp: driver loaded but no devices found
[ 21.878436] ppdev: user-space parallel port driver
[ 22.379923] NET: Registered protocol family 10
[ 22.380406] lo: Disabled Privacy Extensions
[ 24.223124] pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
[ 24.223132] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
[ 24.223136] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
[ 25.154194] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 26.919516] Bluetooth: Core ver 2.11
[ 26.919893] NET: Registered protocol family 31
[ 26.919897] Bluetooth: HCI device and connection manager initialized
[ 26.919900] Bluetooth: HCI socket layer initialized
[ 26.947980] Bluetooth: L2CAP ver 2.9
[ 26.947984] Bluetooth: L2CAP socket layer initialized
[ 26.984472] Bluetooth: RFCOMM socket layer initialized
[ 26.984481] Bluetooth: RFCOMM TTY layer initialized
[ 26.984483] Bluetooth: RFCOMM ver 1.8
[ 27.269797] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 27.269945] PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100102, writing 100106)
[ 27.148069] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.352731] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.634327] [drm] Initialized drm 1.1.0 20060810
[ 32.638579] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.638591] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 32.638676] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 55.075272] CPU0 attaching NULL sched-domain.
[ 55.075284] CPU1 attaching NULL sched-domain.
[ 55.075566] CPU0 attaching sched-domain:
[ 55.075574] domain 0: span 03
[ 55.075578] groups: 01 02
[ 55.075585] domain 1: span 03
[ 55.075589] groups: 03
[ 55.075595] CPU1 attaching sched-domain:
[ 55.075599] domain 0: span 03
[ 55.075604] groups: 02 01
[ 55.075615] domain 1: span 03
[ 55.075621] groups: 03
[ 59.803331] wlan0: Initial auth_alg=0
[ 59.803344] wlan0: authenticate with AP 00:16:01:ed:a8:62
[ 59.805402] wlan0: RX authentication from 00:16:01:ed:a8:62 (alg=0 transaction=2 status=0)
[ 59.805402] wlan0: authenticated
[ 59.805402] wlan0: associate with AP 00:16:01:ed:a8:62
[ 59.807471] wlan0: RX AssocResp from 00:16:01:ed:a8:62 (capab=0x411 status=0 aid=2)
[ 59.807480] wlan0: associated
[ 59.808400] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 61.096251] padlock: VIA PadLock not detected.
[ 77.709580] wlan0: no IPv6 routers present
** Loaded modules:
Module Size Used by
aes_i586 8256 2
aes_generic 29160 1 aes_i586
i915 27744 2
drm 72280 3 i915
rfcomm 36368 2
l2cap 22784 9 rfcomm
bluetooth 52900 4 rfcomm,l2cap
ipv6 241956 22
ppdev 8676 0
parport_pc 25860 0
lp 11012 0
parport 33868 3 ppdev,parport_pc,lp
acpi_cpufreq 9260 2
cpufreq_userspace 3812 0
cpufreq_stats 5216 0
cpufreq_powersave 1856 0
cpufreq_ondemand 8428 1
freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 7432 0
ext2 64712 1
mbcache 8260 1 ext2
loop 16708 0
firewire_sbp2 15956 0
joydev 11328 0
pcmcia 36044 0
tpm_infineon 8488 0
tpm 14944 1 tpm_infineon
arc4 2016 2
tpm_bios 6816 1 tpm
irda 106200 0
yenta_socket 24300 1
ecb 3552 2
crc_ccitt 2176 1 irda
rtc_cmos 10304 0
rtc_core 17532 1 rtc_cmos
rtc_lib 2976 1 rtc_core
snd_hda_intel 309976 1
crypto_blkcipher 18116 1 ecb
rsrc_nonstatic 11584 1 yenta_socket
pcmcia_core 36436 3 pcmcia,yenta_socket,rsrc_nonstatic
i2c_i801 9520 0
psmouse 35920 0
pcspkr 3136 0
serio_raw 6532 0
iwl3945 83700 0
snd_pcm_oss 37824 0
i2c_core 22548 1 i2c_i801
snd_mixer_oss 14880 1 snd_pcm_oss
firmware_class 9088 2 pcmcia,iwl3945
mac80211 122028 1 iwl3945
iTCO_wdt 11204 0
snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
cfg80211 17800 1 mac80211
wmi 7880 0
snd_timer 21320 1 snd_pcm
container 4736 0
snd 48772 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
battery 8448 0
soundcore 7488 1 snd
snd_page_alloc 9992 2 snd_hda_intel,snd_pcm
button 8240 0
ac 4448 0
intel_agp 25084 1
agpgart 31720 3 drm,intel_agp
evdev 11328 5
xfs 475576 2
sg 33140 0
sr_mod 16804 0
cdrom 31872 1 sr_mod
sd_mod 26072 5
ata_piix 20196 4
ata_generic 8004 0
libata 142288 2 ata_piix,ata_generic
scsi_mod 138668 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
ide_pci_generic 4228 0 [permanent]
ide_core 100312 1 ide_pci_generic
sdhci 16428 0
ricoh_mmc 4128 0
mmc_core 43740 1 sdhci
firewire_ohci 20836 0
firewire_core 35680 2 firewire_sbp2,firewire_ohci
crc_itu_t 2176 1 firewire_core
ehci_hcd 32620 0
uhci_hcd 22352 0
usbcore 130032 3 ehci_hcd,uhci_hcd
e1000e 85156 0
dock 10448 1 libata
thermal 19100 0
processor 39660 4 acpi_cpufreq,thermal
fan 5636 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4800 [size=8]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MC Gigabit Network Connection [8086:104d] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 218
Region 0: Memory at fc300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fc324000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 4840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 4860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc525000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fc320000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=09, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 4880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 48a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 48c0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc525400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc200000-fc2fffff
Prefetchable memory behind bridge: 0000000088000000-000000008bffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03) (prog-if 80 [Master])
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 4c00 [size=16]
Region 5: I/O ports at 48f0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at 8c000000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4c20 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 219
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945
0a:09.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b4)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
Memory window 0: 88000000-8bfff000 (prefetchable)
Memory window 1: 90000000-93fff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
0a:09.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 09) (prog-if 10)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fc201000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
0a:09.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 18)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc201800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci
0a:09.3 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 09)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at fc201c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
0a:09.4 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c030]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at fc202000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
0a:09.5 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff)
!!! Unknown header type 7f
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.25-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.25-2-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.25-2-686 suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.25 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false
linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false
Reply to: