Bug#494984: linux-image-2.6.26-1-686: eeepc 900 - No boot without ac adapter
Package: linux-image-2.6.26-1-686
Version: 2.6.26-2
Severity: important
Hello,
my eeepc 900 running sid does not boot no more without ac adapter. Or better it boots without errors, then X comes up
and then system automatically shuts down.
"/var/log/kern.log" reports:
------------------------------------------
Aug 13 12:38:02 cheyenne kernel: [ 32.976355] ACPI: Critical trip point
Aug 13 12:38:02 cheyenne kernel: [ 32.976377] Critical temperature reached (144 C), shutting down.
------------------------------------------
Obviously that temperature is not true, in fact if I plug the ac adapter and then boot system works perfectly.
------------------------------------------
cheyenne:~# acpi -V
Battery 0: Full, 100%
AC Adapter 0: on-line
Thermal 0: ok, 62.0 degrees C
Cooling 0: Processor 0 of 7
------------------------------------------
Thank you and bye.
Andrea Lorenzetti
Ps: current thread on Debian-eeepc-devel mailing list:
http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2008-August/000656.html
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-2) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Aug 8 18:51:38 UTC 2008
** Command line:
root=UUID=1f3155ca-6f34-42fd-9e38-3891b4e20e01 ro vga=788 pci=nommconf quiet
** Tainted: P (1)
** Kernel log:
[14007.084367] end_request: I/O error, dev sdd, sector 0
[14007.085730] end_request: I/O error, dev sdd, sector 0
[14007.087108] end_request: I/O error, dev sdd, sector 0
[14007.110750] end_request: I/O error, dev sdd, sector 63
[14007.112872] end_request: I/O error, dev sdd, sector 63
[14007.116874] end_request: I/O error, dev sdd, sector 0
[14007.120555] end_request: I/O error, dev sdd, sector 8
[14007.124370] end_request: I/O error, dev sdd, sector 0
[14007.128248] end_request: I/O error, dev sdd, sector 0
[14015.462526] usb 5-3: USB disconnect, address 6
[14054.144055] usb 5-3: new high speed USB device using ehci_hcd and address 7
[14054.349107] usb 5-3: configuration #1 chosen from 1 choice
[14054.363363] scsi5 : SCSI emulation for USB Mass Storage devices
[14054.367709] usb-storage: device found at 7
[14054.367738] usb-storage: waiting for device to settle before scanning
[14054.368271] usb 5-3: New USB device found, idVendor=04cf, idProduct=8818
[14054.368282] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14054.368288] usb 5-3: Product: USB Mass Storage Device
[14054.368292] usb 5-3: Manufacturer: Myson Century, Inc.
[14054.368296] usb 5-3: SerialNumber: 100
[14059.364209] usb-storage: device scan complete
[14059.366418] scsi 5:0:0:0: Direct-Access IC25N040 ATMR04-0 MO2O PQ: 0 ANSI: 0 CCS
[14059.410240] sd 5:0:0:0: [sdd] 78140160 512-byte hardware sectors (40008 MB)
[14059.415514] sd 5:0:0:0: [sdd] Write Protect is off
[14059.415525] sd 5:0:0:0: [sdd] Mode Sense: 00 14 00 00
[14059.415530] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[14059.416752] sd 5:0:0:0: [sdd] 78140160 512-byte hardware sectors (40008 MB)
[14059.417509] sd 5:0:0:0: [sdd] Write Protect is off
[14059.417519] sd 5:0:0:0: [sdd] Mode Sense: 00 14 00 00
[14059.417524] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[14059.417531] sdd: sdd1
[14059.446898] sd 5:0:0:0: [sdd] Attached SCSI disk
[14062.453262] end_request: I/O error, dev sdd, sector 63
[14062.453276] __ratelimit: 23 messages suppressed
[14062.453282] Buffer I/O error on device sdd1, logical block 0
[14062.453293] Buffer I/O error on device sdd1, logical block 1
[14062.453300] Buffer I/O error on device sdd1, logical block 2
[14062.453306] Buffer I/O error on device sdd1, logical block 3
[14062.455002] end_request: I/O error, dev sdd, sector 63
[14062.455016] Buffer I/O error on device sdd1, logical block 0
[14062.472764] end_request: I/O error, dev sdd, sector 63
[14062.472778] Buffer I/O error on device sdd1, logical block 0
[14062.472789] Buffer I/O error on device sdd1, logical block 1
[14062.472795] Buffer I/O error on device sdd1, logical block 2
[14062.472801] Buffer I/O error on device sdd1, logical block 3
[14062.474629] end_request: I/O error, dev sdd, sector 63
[14062.474643] Buffer I/O error on device sdd1, logical block 0
[14062.477131] end_request: I/O error, dev sdd, sector 0
[14062.478631] end_request: I/O error, dev sdd, sector 8
[14062.480115] end_request: I/O error, dev sdd, sector 0
[14062.481423] end_request: I/O error, dev sdd, sector 0
[14102.514836] usb 5-3: USB disconnect, address 7
[14909.576121] usb 5-3: new high speed USB device using ehci_hcd and address 8
[14909.728143] usb 5-3: configuration #1 chosen from 1 choice
[14909.742354] scsi6 : SCSI emulation for USB Mass Storage devices
[14909.743253] usb-storage: device found at 8
[14909.743262] usb-storage: waiting for device to settle before scanning
[14909.743746] usb 5-3: New USB device found, idVendor=04cf, idProduct=8818
[14909.743757] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14909.743763] usb 5-3: Product: USB Mass Storage Device
[14909.743767] usb 5-3: Manufacturer: Myson Century, Inc.
[14909.743771] usb 5-3: SerialNumber: 100
[14914.740148] usb-storage: device scan complete
[14914.742256] scsi 6:0:0:0: Direct-Access IC25N040 ATMR04-0 MO2O PQ: 0 ANSI: 0 CCS
[14914.792242] sd 6:0:0:0: [sdd] 78140160 512-byte hardware sectors (40008 MB)
[14914.792868] sd 6:0:0:0: [sdd] Write Protect is off
[14914.792878] sd 6:0:0:0: [sdd] Mode Sense: 00 14 00 00
[14914.792883] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[14914.793988] sd 6:0:0:0: [sdd] 78140160 512-byte hardware sectors (40008 MB)
[14914.794614] sd 6:0:0:0: [sdd] Write Protect is off
[14914.794623] sd 6:0:0:0: [sdd] Mode Sense: 00 14 00 00
[14914.794628] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[14914.794634] sdd: sdd1
[14914.824707] sd 6:0:0:0: [sdd] Attached SCSI disk
[14928.406305] end_request: I/O error, dev sdd, sector 63
[14928.406305] __ratelimit: 6 messages suppressed
[14928.406305] Buffer I/O error on device sdd1, logical block 0
[14928.406305] Buffer I/O error on device sdd1, logical block 1
[14928.406305] Buffer I/O error on device sdd1, logical block 2
[14928.406305] Buffer I/O error on device sdd1, logical block 3
[14928.417085] end_request: I/O error, dev sdd, sector 63
[14928.417099] Buffer I/O error on device sdd1, logical block 0
[14928.426114] end_request: I/O error, dev sdd, sector 63
[14928.426129] Buffer I/O error on device sdd1, logical block 0
[14928.426140] Buffer I/O error on device sdd1, logical block 1
[14928.426146] Buffer I/O error on device sdd1, logical block 2
[14928.426152] Buffer I/O error on device sdd1, logical block 3
[14928.427896] end_request: I/O error, dev sdd, sector 63
[14928.427910] Buffer I/O error on device sdd1, logical block 0
[14928.429294] end_request: I/O error, dev sdd, sector 0
[14928.430795] end_request: I/O error, dev sdd, sector 8
[14928.432133] end_request: I/O error, dev sdd, sector 0
[14928.433339] end_request: I/O error, dev sdd, sector 0
[14958.548354] usb 5-3: USB disconnect, address 8
[15136.464081] usb 2-1: new full speed USB device using uhci_hcd and address 4
[15137.402169] usb 2-1: configuration #1 chosen from 1 choice
[15137.412183] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[15137.412196] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[15137.412201] usb 2-1: Product: BT2.0
[15143.023054] input: HP Three Button Mouse as /class/input/input13
** Loaded modules:
Module Size Used by
usbmon 15420 0
nfs 213896 0
nls_utf8 1760 0
nls_cp437 5568 0
vfat 9152 0
fat 40864 1 vfat
nls_base 6820 4 nls_utf8,nls_cp437,vfat,fat
wlan_tkip 10272 2
joydev 8480 0
i915 25280 1
drm 65256 2 i915
nfsd 186704 13
lockd 54248 2 nfs,nfsd
nfs_acl 2912 2 nfs,nfsd
auth_rpcgss 33952 1 nfsd
sunrpc 162176 12 nfs,nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3904 1 nfsd
rfcomm 28272 4
hidp 12000 3
hid 33184 1 hidp
l2cap 17248 18 rfcomm,hidp
ipv6 235172 14
fuse 42908 1
eeepc_acpi 5584 0
wlan_scan_sta 11200 1
uvcvideo 45576 0
compat_ioctl32 1312 1 uvcvideo
videodev 27520 1 uvcvideo
v4l1_compat 12260 2 uvcvideo,videodev
usb_storage 75712 0
serio_raw 4740 0
psmouse 32336 0
i2c_i801 7920 0
i2c_core 19828 1 i2c_i801
iTCO_wdt 9508 0
rng_core 3940 0
hci_usb 12252 3
pcspkr 2432 0
bluetooth 44900 8 rfcomm,hidp,l2cap,hci_usb
video 16400 0
output 2912 1 video
battery 6272 0
ac 3264 0
snd_hda_intel 324248 2
snd_pcm_oss 32800 0
snd_mixer_oss 12320 2 snd_pcm_oss
snd_pcm 62628 2 snd_hda_intel,snd_pcm_oss
snd_timer 17800 1 snd_pcm
button 6064 0
eeepc_laptop 7440 0
ath_rate_sample 11008 1
ath_pci 202104 0
atl2 22712 0
wlan 193040 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 300672 3 ath_rate_sample,ath_pci
snd 45604 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 6368 2 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
intel_agp 22300 1
agpgart 28776 3 drm,intel_agp
evdev 8000 6
ext3 105256 2
jbd 39444 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 5
ide_pci_generic 3908 0 [permanent]
ide_core 92628 1 ide_pci_generic
ata_piix 14180 3
ata_generic 4676 0
ahci 23176 0
libata 140416 3 ata_piix,ata_generic,ahci
scsi_mod 129356 3 usb_storage,sd_mod,libata
dock 8272 1 libata
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 7 usbmon,uvcvideo,usb_storage,hci_usb,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 2 thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8337]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Device [1a3b:1026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath_pci
Kernel modules: ath_pci, ath5k
03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter [1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 220
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fbfa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl2
Kernel modules: atl2
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
Reply to: