linux-modules-extra-2.6_2.6.26-2_powerpc.changes is NEW
(new) atl2-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
Atheros L2 Ethernet Adapter driver for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the Atheros L2 Ethernet Adapter driver modules for
latest Linux kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
Atheros L2 Ethernet Adapter driver for Linux 2.6 on 64-bit PowerPC
This package depends on the Atheros L2 Ethernet Adapter driver modules for
latest Linux kernel 2.6 on 64-bit PowerPC machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
Atheros L2 Ethernet Adapter driver for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the Atheros L2 Ethernet Adapter driver modules for
latest Linux kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.26-1-powerpc-smp_2.6.26+2.0.3-2_powerpc.deb optional admin
Atheros L2 Ethernet Adapter driver for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the Atheros L2 Ethernet Adapter driver modules for
the Linux kernel version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.26-1-powerpc64_2.6.26+2.0.3-2_powerpc.deb optional admin
Atheros L2 Ethernet Adapter driver for Linux 2.6.26 on 64-bit PowerPC
This package provides the Atheros L2 Ethernet Adapter driver modules for
the Linux kernel version 2.6.26 on 64-bit PowerPC machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) atl2-modules-2.6.26-1-powerpc_2.6.26+2.0.3-2_powerpc.deb optional admin
Atheros L2 Ethernet Adapter driver for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the Atheros L2 Ethernet Adapter driver modules for
the Linux kernel version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
atl2 is the Linux Base Driver for the Atheros(R) L2 Fast Ethernet Adapter.
The Atheros(R) L2 Fast Ethernet Adapter is present in a few low cost Asus
laptop systems, such as the Asus Eee PC.
(new) aufs-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
Stackable unification filesystem for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
Stackable unification filesystem for Linux 2.6 on 64-bit PowerPC
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on 64-bit PowerPC machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
Stackable unification filesystem for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the Stackable unification filesystem modules for
latest Linux kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-powerpc-smp_2.6.26+0+20080719-2_powerpc.deb optional admin
Stackable unification filesystem for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-powerpc64_2.6.26+0+20080719-2_powerpc.deb optional admin
Stackable unification filesystem for Linux 2.6.26 on 64-bit PowerPC
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on 64-bit PowerPC machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) aufs-modules-2.6.26-1-powerpc_2.6.26+0+20080719-2_powerpc.deb optional admin
Stackable unification filesystem for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the Stackable unification filesystem modules for the
Linux kernel version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
Aufs is a stackable unification filesystem such as Unionfs, which unifies
several directories and provides a merged single directory.
(new) btrfs-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
Snapshotting filesystem for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on multiprocessor 32-bit PowerPC machines.
(new) btrfs-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
Snapshotting filesystem for Linux 2.6 on 64-bit PowerPC
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on 64-bit PowerPC machines.
(new) btrfs-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
Snapshotting filesystem for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the Snapshotting filesystem modules for latest
Linux kernel 2.6 on uniprocessor 32-bit PowerPC machines.
(new) btrfs-modules-2.6.26-1-powerpc-smp_2.6.26+0.15-2_powerpc.deb optional admin
Snapshotting filesystem for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on multiprocessor 32-bit PowerPC machines.
(new) btrfs-modules-2.6.26-1-powerpc64_2.6.26+0.15-2_powerpc.deb optional admin
Snapshotting filesystem for Linux 2.6.26 on 64-bit PowerPC
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on 64-bit PowerPC machines.
(new) btrfs-modules-2.6.26-1-powerpc_2.6.26+0.15-2_powerpc.deb optional admin
Snapshotting filesystem for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the Snapshotting filesystem modules for the Linux
kernel version 2.6.26 on uniprocessor 32-bit PowerPC machines.
(new) drbd8-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
RAID 1 over TCP/IP for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
RAID 1 over TCP/IP for Linux 2.6 on 64-bit PowerPC
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on 64-bit PowerPC machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
RAID 1 over TCP/IP for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the RAID 1 over TCP/IP modules for latest Linux
kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-powerpc-smp_2.6.26+8.0.13-2_powerpc.deb optional admin
RAID 1 over TCP/IP for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-powerpc64_2.6.26+8.0.13-2_powerpc.deb optional admin
RAID 1 over TCP/IP for Linux 2.6.26 on 64-bit PowerPC
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on 64-bit PowerPC machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) drbd8-modules-2.6.26-1-powerpc_2.6.26+8.0.13-2_powerpc.deb optional admin
RAID 1 over TCP/IP for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the RAID 1 over TCP/IP modules for the Linux kernel
version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
Drbd is a block device which is designed to build high availability
clusters by providing a virtual shared device which keeps disks in nodes
synchronised using TCP/IP. This simulates RAID 1 but avoiding the use of
uncommon hardware (shared SCSI buses or Fibre Channel). It is currently
limited to fail-over HA clusters.
(new) et131x-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
et131x Ethernet Adapter driver for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the et131x Ethernet Adapter driver modules for
latest Linux kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
et131x Ethernet Adapter driver for Linux 2.6 on 64-bit PowerPC
This package depends on the et131x Ethernet Adapter driver modules for
latest Linux kernel 2.6 on 64-bit PowerPC machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
et131x Ethernet Adapter driver for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the et131x Ethernet Adapter driver modules for
latest Linux kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6.26-1-powerpc-smp_2.6.26+1.2.3-2-2_powerpc.deb optional admin
et131x Ethernet Adapter driver for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the et131x Ethernet Adapter driver modules for the
Linux kernel version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6.26-1-powerpc64_2.6.26+1.2.3-2-2_powerpc.deb optional admin
et131x Ethernet Adapter driver for Linux 2.6.26 on 64-bit PowerPC
This package provides the et131x Ethernet Adapter driver modules for the
Linux kernel version 2.6.26 on 64-bit PowerPC machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) et131x-modules-2.6.26-1-powerpc_2.6.26+1.2.3-2-2_powerpc.deb optional admin
et131x Ethernet Adapter driver for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the et131x Ethernet Adapter driver modules for the
Linux kernel version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
et131x is the Linux Driver for the Agere Systems ET-131x PCI-E Ethernet
Controller.
(new) gspca-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the Driver for webcams and digicams based on
spca5xx chipset modules for latest Linux kernel 2.6 on multiprocessor
32-bit PowerPC machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6 on 64-bit PowerPC
This package depends on the Driver for webcams and digicams based on
spca5xx chipset modules for latest Linux kernel 2.6 on 64-bit PowerPC
machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the Driver for webcams and digicams based on
spca5xx chipset modules for latest Linux kernel 2.6 on uniprocessor 32-bit
PowerPC machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6.26-1-powerpc-smp_2.6.26+01.00.20-2_powerpc.deb optional admin
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the Driver for webcams and digicams based on spca5xx
chipset modules for the Linux kernel version 2.6.26 on multiprocessor
32-bit PowerPC machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6.26-1-powerpc64_2.6.26+01.00.20-2_powerpc.deb optional admin
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6.26 on 64-bit PowerPC
This package provides the Driver for webcams and digicams based on spca5xx
chipset modules for the Linux kernel version 2.6.26 on 64-bit PowerPC
machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) gspca-modules-2.6.26-1-powerpc_2.6.26+01.00.20-2_powerpc.deb optional admin
Driver for webcams and digicams based on spca5xx chipset for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the Driver for webcams and digicams based on spca5xx
chipset modules for the Linux kernel version 2.6.26 on uniprocessor 32-bit
PowerPC machines.
.
The gpsca Video for Linux (v4l) driver, provides support for webcams and
digital cameras based on the spca5xx range of chips manufactured by
SunPlus, Sonix, Z-star, Vimicro, Conexant, Etoms, Mars-semi, Pixart and
Transvision.
(new) iscsitarget-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
iSCSI Enterprise Target for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
iSCSI Enterprise Target for Linux 2.6 on 64-bit PowerPC
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on 64-bit PowerPC machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
iSCSI Enterprise Target for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the iSCSI Enterprise Target modules for latest
Linux kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-powerpc-smp_2.6.26+0.4.16+svn162-2_powerpc.deb optional admin
iSCSI Enterprise Target for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-powerpc64_2.6.26+0.4.16+svn162-2_powerpc.deb optional admin
iSCSI Enterprise Target for Linux 2.6.26 on 64-bit PowerPC
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on 64-bit PowerPC machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
(new) iscsitarget-modules-2.6.26-1-powerpc_2.6.26+0.4.16+svn162-2_powerpc.deb optional admin
iSCSI Enterprise Target for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the iSCSI Enterprise Target modules for the Linux
kernel version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
iSCSI Enterprise Target is for building an iSCSI storage system. It is
aimed at developing an iSCSI target satisfying enterprise requirements.
linux-modules-extra-2.6_2.6.26-2.dsc
to pool/main/l/linux-modules-extra-2.6/linux-modules-extra-2.6_2.6.26-2.dsc
linux-modules-extra-2.6_2.6.26-2.tar.gz
to pool/main/l/linux-modules-extra-2.6/linux-modules-extra-2.6_2.6.26-2.tar.gz
(new) loop-aes-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
loop-AES encryption for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
loop-AES encryption for Linux 2.6 on 64-bit PowerPC
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on 64-bit PowerPC machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
loop-AES encryption for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the loop-AES encryption modules for latest Linux
kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-powerpc-smp_2.6.26+3.2c-2_powerpc.deb optional admin
loop-AES encryption for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-powerpc64_2.6.26+3.2c-2_powerpc.deb optional admin
loop-AES encryption for Linux 2.6.26 on 64-bit PowerPC
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on 64-bit PowerPC machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) loop-aes-modules-2.6.26-1-powerpc_2.6.26+3.2c-2_powerpc.deb optional admin
loop-AES encryption for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the loop-AES encryption modules for the Linux kernel
version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
The loop-AES encryption modules provide support for symmetric-key
encryption of block devices. They are typically used to encrypt disk
partitions and swap space.
.
Supported ciphers are AES, Twofish and Blowfish in CBC mode with seeded
MD5 IV. Compatibility options are provided to access encrypted devices
using deprecated modes such as cryptoloop, kerneli and loop-AES v1/v2.
.
You will need to install the package loop-aes-utils to use the loop-AES
encryption modules.
(new) lzma-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
Lempel Ziv compression method (LZMA) for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
Lempel Ziv compression method (LZMA) for Linux 2.6 on 64-bit PowerPC
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on 64-bit PowerPC machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
Lempel Ziv compression method (LZMA) for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the Lempel Ziv compression method (LZMA) modules
for latest Linux kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-powerpc-smp_2.6.26+4.43-2_powerpc.deb optional admin
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-powerpc64_2.6.26+4.43-2_powerpc.deb optional admin
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on 64-bit PowerPC
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on 64-bit PowerPC machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) lzma-modules-2.6.26-1-powerpc_2.6.26+4.43-2_powerpc.deb optional admin
Lempel Ziv compression method (LZMA) for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the Lempel Ziv compression method (LZMA) modules for
the Linux kernel version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
LZMA is a compression algorithm, based on the famous Lempel Ziv
compression method.
.
The main characteristics of the algorithm are very good compression, fast
decompression, use of lot of RAM for compression and low usage of RAM for
decompression.
.
LZMA provides high compression ratio and very fast decompression, so it is
very suitable for embedded applications. For example, it can be used for
ROM (firmware) compression.
(new) mol-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
Mac-on-Linux emulator for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the Mac-on-Linux emulator modules for latest Linux
kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
Mac-on-Linux is basically an emulator capable of running MacOS on most
Debian/PowerPC machines. However, several things are not emulated - in
particular, the processor runs natively, which makes Mac-on-Linux very
fast.
(new) mol-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
Mac-on-Linux emulator for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the Mac-on-Linux emulator modules for latest Linux
kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
Mac-on-Linux is basically an emulator capable of running MacOS on most
Debian/PowerPC machines. However, several things are not emulated - in
particular, the processor runs natively, which makes Mac-on-Linux very
fast.
(new) mol-modules-2.6.26-1-powerpc-smp_2.6.26+0.9.72.1~dfsg-2_powerpc.deb optional admin
Mac-on-Linux emulator for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the Mac-on-Linux emulator modules for the Linux
kernel version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
Mac-on-Linux is basically an emulator capable of running MacOS on most
Debian/PowerPC machines. However, several things are not emulated - in
particular, the processor runs natively, which makes Mac-on-Linux very
fast.
(new) mol-modules-2.6.26-1-powerpc_2.6.26+0.9.72.1~dfsg-2_powerpc.deb optional admin
Mac-on-Linux emulator for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the Mac-on-Linux emulator modules for the Linux
kernel version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
Mac-on-Linux is basically an emulator capable of running MacOS on most
Debian/PowerPC machines. However, several things are not emulated - in
particular, the processor runs natively, which makes Mac-on-Linux very
fast.
(new) nilfs2-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
Log-structured snapshotting filesystem for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
Log-structured snapshotting filesystem for Linux 2.6 on 64-bit PowerPC
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on 64-bit PowerPC machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
Log-structured snapshotting filesystem for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the Log-structured snapshotting filesystem modules
for latest Linux kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-powerpc-smp_2.6.26+2.0.3-2_powerpc.deb optional admin
Log-structured snapshotting filesystem for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on multiprocessor 32-bit PowerPC
machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-powerpc64_2.6.26+2.0.3-2_powerpc.deb optional admin
Log-structured snapshotting filesystem for Linux 2.6.26 on 64-bit PowerPC
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on 64-bit PowerPC machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) nilfs2-modules-2.6.26-1-powerpc_2.6.26+2.0.3-2_powerpc.deb optional admin
Log-structured snapshotting filesystem for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the Log-structured snapshotting filesystem modules
for the Linux kernel version 2.6.26 on uniprocessor 32-bit PowerPC
machines.
.
NILFS is a log-structured file system supporting continuous snapshotting.
(new) redhat-cluster-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
Redhat Cluster infrastructure for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
Redhat Cluster infrastructure for Linux 2.6 on 64-bit PowerPC
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on 64-bit PowerPC machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
Redhat Cluster infrastructure for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-powerpc-smp_2.6.26+2.20080801-2_powerpc.deb optional admin
Redhat Cluster infrastructure for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-powerpc64_2.6.26+2.20080801-2_powerpc.deb optional admin
Redhat Cluster infrastructure for Linux 2.6.26 on 64-bit PowerPC
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on 64-bit PowerPC machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) redhat-cluster-modules-2.6.26-1-powerpc_2.6.26+2.20080801-2_powerpc.deb optional admin
Redhat Cluster infrastructure for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
Red Hat cluster suite contains drivers for a gfs (shared-disk cluster file
system) and gnbd (share block devices to many machines over a network).
(new) speakup-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
Screen review module for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
Screen review module for Linux 2.6 on 64-bit PowerPC
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on 64-bit PowerPC machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
Screen review module for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the Screen review module modules for latest Linux
kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-powerpc-smp_2.6.26+3.0.3+git20080724.dfsg.1-2_powerpc.deb optional admin
Screen review module for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-powerpc64_2.6.26+3.0.3+git20080724.dfsg.1-2_powerpc.deb optional admin
Screen review module for Linux 2.6.26 on 64-bit PowerPC
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on 64-bit PowerPC machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) speakup-modules-2.6.26-1-powerpc_2.6.26+3.0.3+git20080724.dfsg.1-2_powerpc.deb optional admin
Screen review module for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the Screen review module modules for the Linux
kernel version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
Speakup allows you to interact with applications and Linux with audible
feedback from the console using a synthetic speech device.
(new) squashfs-modules-2.6-powerpc-smp_2.6.26-2_powerpc.deb optional admin
Compression filesystem for Linux 2.6 on multiprocessor 32-bit PowerPC
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on multiprocessor 32-bit PowerPC machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-powerpc64_2.6.26-2_powerpc.deb optional admin
Compression filesystem for Linux 2.6 on 64-bit PowerPC
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on 64-bit PowerPC machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-powerpc_2.6.26-2_powerpc.deb optional admin
Compression filesystem for Linux 2.6 on uniprocessor 32-bit PowerPC
This package depends on the Compression filesystem modules for latest
Linux kernel 2.6 on uniprocessor 32-bit PowerPC machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-powerpc-smp_2.6.26+3.3-2_powerpc.deb optional admin
Compression filesystem for Linux 2.6.26 on multiprocessor 32-bit PowerPC
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on multiprocessor 32-bit PowerPC machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-powerpc64_2.6.26+3.3-2_powerpc.deb optional admin
Compression filesystem for Linux 2.6.26 on 64-bit PowerPC
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on 64-bit PowerPC machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.26-1-powerpc_2.6.26+3.3-2_powerpc.deb optional admin
Compression filesystem for Linux 2.6.26 on uniprocessor 32-bit PowerPC
This package provides the Compression filesystem modules for the Linux
kernel version 2.6.26 on uniprocessor 32-bit PowerPC machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
Changes: linux-modules-extra-2.6 (2.6.26-2) unstable; urgency=low
.
[ Bastian Blank ]
* Enable drbd8.
* Remove sfc.
* Enable mol.
* Disable virtualbox-ose-guest. It does not build properly.
* Disable aufs on s390/s390x, see #494447.
* Remove r6040.
* Disable kqemu, see #494479.
Override entries for your package:
linux-modules-extra-2.6_2.6.26-2.dsc - source devel
Announcing to debian-devel-changes@lists.debian.org
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: