[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#414044: marked as done (linux-2.6: e1000 panics on parisc)

Your message dated Fri, 4 Jul 2008 22:42:32 +0200
with message-id <20080704204232.GH29028@stro.at>
and subject line Re: linux-2.6: e1000 panics on parisc
has caused the Debian Bug report #414044,
regarding linux-2.6: e1000 panics on parisc
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
414044: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=414044
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-2.6
Severity: normal

The e1000 driver shipped with current d-i panics the kernel on parisc.
Please either disable it or backport the fixes that can probably be
found in 2.6.20 (which works just fine).

HTH

T-Bone

Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Backtrace:
 [<000000001011a60c>] outl+0x7c/0x88
 [<00000000040cd89c>] e1000_io_write+0x14/0x20 [e1000]
 [<00000000040e1a0c>] e1000_reset_hw+0x29c/0x830 [e1000]
 [<00000000040d5a24>] e1000_probe+0x7fc/0xe20 [e1000]
 [<0000000010288fd0>] pci_device_probe+0x88/0xc8
 [<00000000102d82c0>] driver_probe_device+0x80/0xf8
 [<00000000102d84f4>] __driver_attach+0xac/0x138
 [<00000000102d791c>] bus_for_each_dev+0x6c/0xd0
 [<00000000102d8188>] driver_attach+0x28/0x38
 [<00000000102d731c>] bus_add_driver+0xb4/0x1d8
 [<00000000102d88d0>] driver_register+0xb8/0xc8
 [<0000000010289248>] __pci_register_driver+0x50/0x98
 [<000000000003409c>] e1000_init_module+0x6c/0x78 [e1000]
 [<0000000010159fc4>] sys_init_module+0x17cc/0x1a00
 [<0000000010104f94>] syscall_exit+0x0/0x14


Kernel Fault: Code=26 regs=00000000aed40a90 (Addr=0000000000000000)

     YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001000000000000001111 Not tainted
r00-03  000000000804000f 0000000010560d20 0000000004fd8b708
r04-07  00000000040c4000 0000000000030000 0000000002fc0229
0000000000000040
r08-11  000000004fd8b708 000000004fd8b000 000000004ffaa800
0000000000020000
r12-15  0000000000000000 0000000000000167 00000000040a30a2
00000000040ec7e0
r16-19  00000000040aa108 00000000000003fa 00000000040aa148
0000000000000000
r20-23  0000000008140000 0000000080000000 0000000000000900
0000000000000000
r24-27  0000000000000000 0000000000000000 000000 000000001054fd20
r28-31  000000000000fffc 00000000aed40a60 00000000aed40a90
0000000000000000
sr00-03  0000000000002000 0000000000000000 0000000000000000
0000000000011800
sr04-07  0000000000000000 0000000000000000 0000000000000000
0000000000000000

IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000102903e0
00000000102903e4
 IIR: 0ff81280    ISR: 0000000000000000  IOR: 0000000000000000
 CPU:        0   CR30: 00000000aed40000 CR31: 00000R28: 000000001016dda4
 IAOQ[0]: lba_pat_out32+0x30/0x50
 IAOQ[1]: lba_pat_out32+0x34/0x50
 RP(r2): outl+0x7c/0x88
Kernel panic - not syncing: Kernel Fault


-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (700, 'testing'), (90, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.20.1-ck1
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

--- End Message ---
--- Begin Message --- 
Version: 2.6.24-1

> 2.6.20 (which works just fine).

so etch + half should also just be fine, thus closing.

thanks for report.

-- 
maks

--- End Message ---
Reply to: