[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#417914: marked as done (BUG: unable to handle kernel paging request at virtual address f57fc030)

Your message dated Thu, 3 Jul 2008 16:27:22 +0200
with message-id <20080703142722.GL13910@stro.at>
and subject line linux-image-2.6.18-6-686: kernel oops handling paging request
has caused the Debian Bug report #417914,
regarding BUG: unable to handle kernel paging request at virtual address f57fc030
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
417914: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=417914
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-image-2.6.18-4-xen-vserver-686
Version: 2.6.18.dfsg.1-12
Severity: important


When I try to insert the module for either VMware or VirtualBox, I get a kernel oops.

dmesg says:
-------------------------------
BUG: unable to handle kernel paging request at virtual address f57fc030
 printing eip:
eeac901a
2917c000 -> *pde = 00000000:c698d001
2918d000 -> *pme = 00000000:072ff067
012ff000 -> *pte = 00000000:00000000
Oops: 0000 [#1]
SMP
Modules linked in: vboxdrv xt_tcpudp xt_physdev iptable_filter ip_tables x_tables bridge netloop button ac battery ipv6 
dvb_bt8xx nxt6000 sp887x dst_ca dst cx24110 or51211 zl10353 lgdt330x saa7134_dvb dvb_pll mt352 video_buf_dvb dvb_core 
nxt200x tda1004x loop btaudio bt878 snd_intel8x0 tuner snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd snd_page_alloc 
saa7134 ir_kbd_i2c bttv video_buf firmware_class ir_common compat_ioctl32 i2c_algo_bit btcx_risc tveeprom videodev 
v4l1_compat v4l2_common i810_audio rtc psmouse serio_raw floppy ac97_codec serial_core shpchp parport_pc parport soundcore 
i2c_i801 i2c_core intel_agp pci_hotplug pcspkr agpgart evdev reiserfs dm_mirror dm_snapshot dm_mod ide_generic ide_cd cdrom 
ide_disk usbhid piix ata_piix libata scsi_mod generic ide_core tg3 ehci_hcd uhci_hcd usbcore thermal processor fan
CPU:    0
EIP:    0061:[<eeac901a>]    Not tainted VLI
EFLAGS: 00010286   (2.6.18-4-xen-vserver-686 #1)
EIP is at VBoxSupDrvInit+0x1a/0x1bb [vboxdrv]
eax: f57fc000   ebx: eeb2dce0   ecx: eeb2dce0   edx: eeb2dce0
esi: eb010800   edi: eb010b68   ebp: eb010b38   esp: e91a1ec8
ds: 007b   es: 007b   ss: 0069
Process modprobe (pid: 6899[#49159], ti=e91a0000 task=ec6db5f0 task.ti=e91a0000)
Stack: c02e022c eeb2dce0 00000001 eb010b38 eeb2dce0 eb010800 eb010b68 eb010b38
       c0139e69 ee1a367e 00000000 eeb2dce0 00000000 00000000 00000000 00000000
       00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Call Trace:
 [<c0139e69>] sys_init_module+0x16c3/0x1846
 [<ee1a367e>] journal_end+0xad/0xb2 [reiserfs]
 [<c0104883>] syscall_call+0x7/0xb
Code:  Bad EIP value.
EIP: [<eeac901a>] VBoxSupDrvInit+0x1a/0x1bb [vboxdrv] SS:ESP 0069:e91a1ec8
-------------------------------

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-xen-vserver-686
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)

Versions of packages linux-image-2.6.18-4-xen-vserver-686 depends on:
ii  initramfs-tools         0.85f            tools for generating an initramfs
ii  linux-modules-2.6.18-4- 2.6.18.dfsg.1-12 Linux 2.6.18 modules on i686

Versions of packages linux-image-2.6.18-4-xen-vserver-686 recommends:
ii  libc6-xen                   2.3.6.ds1-13 GNU C Library: Shared libraries [X

-- no debconf information

--- End Message ---
--- Begin Message --- 
Version: 2.6.24-1


that mm trouble has been fixed in newer linux images. etch + half kernel
have the upstream fix. as the oops is quite rare and fix hasn't been 
clearly identified it is recommeded to upgrade to etch + half kernel
-> http://wiki.debian.org/EtchAndAHalf

thanks for the report.

-- 
maks

--- End Message ---
Reply to: