[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#480213: marked as done (linux-image-2.6.24-1-amd64: Losing wifi connection - switched to short barker preamble)



Your message dated Sun, 29 Jun 2008 16:18:41 +0200
with message-id <20080629141841.GD11284@stro.at>
and subject line Re: linux-image-2.6.24-1-amd64: Losing wifi connection - switched to short barker preamble
has caused the Debian Bug report #480213,
regarding linux-image-2.6.24-1-amd64: Losing wifi connection - switched to short barker preamble
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
480213: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=480213
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.24-1-amd64
Version: 2.6.24-5
Severity: important


my wifi is losing conectivity and sending the next message to kernel -
eth1: switched to short barker preamble

maybe this is connected to bug: 462711 (same error there ) 

here is the message :

eth1: Initial auth_alg=0
eth1: authenticate with AP 00:11:6b:22:7f:76
eth1: RX authentication from 00:11:6b:22:7f:76 (alg=0 transaction=2 
status=0)
eth1: authenticated
eth1: associate with AP 00:11:6b:22:7f:76
eth1: RX AssocResp from 00:11:6b:22:7f:76 (capab=0x421 status=0 aid=1)
eth1: associated
eth1: switched to short barker preamble (BSSID=00:11:6b:22:7f:76)

this appers dozens of times in dmesg

-- Package-specific info:
** Version:
Linux version 2.6.24-1-amd64 (Debian 2.6.24-5) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27 16:52:38 UTC 2008

** Command line:
root=/dev/sda7 ro quiet 

** Not tainted

** Kernel log:
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Attempting manual resume
swsusp: Marking nosave pages: 000000000009d000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Video Bus as /class/input/input6
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
input: Video Bus as /class/input/input7
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
input: PC Speaker as /class/input/input8
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
mmc0: SDHCI at 0xb0202800 irq 23 PIO
sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1)
PCI: Enabling device 0000:06:04.4 (0000 -> 0002)
ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 23 (level, low) -> IRQ 23
mmc1: SDHCI at 0xb0202100 irq 23 PIO
b43-phy0: Broadcom 4318 WLAN found
phy0: Selected rate control algorithm 'simple'
udev: renamed network interface wlan0 to eth1
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input9
Adding 1951856k swap on /dev/sda6.  Priority:-1 extents:1 across:1951856k
EXT3 FS on sda7, internal journal
loop: module loaded
input: Acer hotkey driver as /class/input/input10
Acer Travelmate hotkey driver v0.5.35
acerhk: Your hardware does not need polling enabled for hotkeys to work, you can safely disable polling by using the module parameter poll=0 (unless you want to play around with the driver and see if there are buttons which need polling).
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link down
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
input: b43-phy0 as /class/input/input11
Registered led device: b43-phy0:tx
Registered led device: b43-phy0:rx
Registered led device: b43-phy0:radio
hda-intel: Invalid position buffer, using LPIB read method instead.
eth1: Initial auth_alg=0
eth1: authenticate with AP 00:11:6b:22:7f:76
eth1: RX authentication from 00:11:6b:22:7f:76 (alg=0 transaction=2 status=0)
eth1: authenticated
eth1: associate with AP 00:11:6b:22:7f:76
eth1: RX AssocResp from 00:11:6b:22:7f:76 (capab=0x421 status=0 aid=1)
eth1: associated
eth1: switched to short barker preamble (BSSID=00:11:6b:22:7f:76)
mmc1: new SD card at address 1fe1
mmcblk0: mmc1:1fe1 SD512 500224KiB (ro)
 mmcblk0: p1
mmc1: card 1fe1 removed

** Loaded modules:
Module                  Size  Used by
nls_iso8859_1           9728  0 
nls_cp437              11392  0 
vfat                   17920  0 
fat                    58288  1 vfat
mmc_block              18816  0 
rfkill_input            9600  0 
rfcomm                 46240  2 
l2cap                  29568  9 rfcomm
bluetooth              65956  4 rfcomm,l2cap
ppdev                  13832  0 
parport_pc             42408  0 
lp                     17476  0 
parport                44812  3 ppdev,parport_pc,lp
acerhk                 39968  0 
loop                   22788  0 
joydev                 17536  0 
arc4                    6528  2 
ecb                     8192  2 
blkcipher              11780  1 ecb
b43                   120616  0 
rfkill                 12816  3 rfkill_input,b43
snd_hda_intel         362024  1 
mac80211              132236  1 b43
snd_pcm_oss            46624  0 
snd_mixer_oss          21376  1 snd_pcm_oss
cfg80211               19856  1 mac80211
snd_pcm                89352  2 snd_hda_intel,snd_pcm_oss
led_class              10120  1 b43
sdhci                  23172  0 
serio_raw              11908  0 
pcspkr                  7808  0 
input_polldev           9872  1 b43
psmouse                45724  0 
snd_timer              28552  1 snd_pcm
mmc_core               58760  2 mmc_block,sdhci
yenta_socket           31756  1 
rsrc_nonstatic         16128  1 yenta_socket
k8temp                 10496  0 
snd                    65896  7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
i2c_piix4              13708  0 
soundcore              13216  1 snd
snd_page_alloc         15248  2 snd_hda_intel,snd_pcm
i2c_core               29824  1 i2c_piix4
video                  25620  0 
output                  8704  1 video
container               9856  0 
battery                19976  0 
ac                     11400  0 
shpchp                 38428  0 
pci_hotplug            35504  1 shpchp
button                 13984  0 
evdev                  17024  10 
ext3                  139024  2 
jbd                    55976  1 ext3
mbcache                13952  1 ext3
sd_mod                 33536  4 
ide_cd                 44704  0 
cdrom                  39464  1 ide_cd
atiixp                  9488  0 [permanent]
sata_sil               17288  3 
generic                 9732  0 [permanent]
ide_core              144920  3 ide_cd,atiixp,generic
8139cp                 28672  0 
ata_generic            13060  0 
ssb                    39428  1 b43
pcmcia                 45720  2 b43,ssb
pcmcia_core            46500  4 b43,yenta_socket,rsrc_nonstatic,pcmcia
firmware_class         15104  2 b43,pcmcia
8139too                33024  0 
mii                    10240  2 8139cp,8139too
ehci_hcd               39692  0 
libata                162736  2 sata_sil,ata_generic
scsi_mod              170296  2 sd_mod,libata
ohci_hcd               28164  0 
thermal                22688  0 
processor              45032  1 thermal
fan                     9864  0 

** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10)
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 64

00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: b0100000-b01fffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

00:04.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a36] (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37] (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at 8440 [size=8]
	Region 1: I/O ports at 8434 [size=4]
	Region 2: I/O ports at 8438 [size=8]
	Region 3: I/O ports at 8430 [size=4]
	Region 4: I/O ports at 8400 [size=16]
	Region 5: Memory at b0004000 (32-bit, non-prefetchable) [size=512]
	[virtual] Expansion ROM at 50000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: sata_sil
	Kernel modules: ata_generic, sata_sil, generic

00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (rev 80) (prog-if 10 [OHCI])
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at b0005000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (rev 80) (prog-if 10 [OHCI])
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at b0006000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (rev 80) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at b0007000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 83)
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: I/O ports at 8410 [size=16]
	Region 1: Memory at 50080000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c-piix4

00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (rev 80) (prog-if 82 [Master PriP])
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 8420 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ATIIXP_IDE
	Kernel modules: ata_generic, generic, atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller [1002:437b] (rev 01)
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin ? routed to IRQ 16
	Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] (rev 80)
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (rev 80) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: b0200000-b02fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp
	Kernel modules: k8temp

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP] [1002:5975] (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 66 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
	Region 1: I/O ports at 9000 [size=256]
	Region 2: Memory at b0100000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at b0120000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: radeonfb

06:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at a000 [size=256]
	Region 1: Memory at b0202000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: 8139too
	Kernel modules: 8139too, 8139cp

06:02.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
	Subsystem: AMBIT Microsystem Corp. TravelMate 2410 [1468:0312]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at b0200000 (32-bit, non-prefetchable) [size=8K]
	Kernel driver in use: b43-pci-bridge
	Kernel modules: ssb

06:04.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller [1524:1412] (rev 10)
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at b0203000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
	Memory window 0: 54000000-57fff000 (prefetchable)
	Memory window 1: 58000000-5bfff000
	I/O window 0: 0000a400-0000a4ff
	I/O window 1: 0000a800-0000a8ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

06:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530] (rev 01)
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at b0202400 (32-bit, non-prefetchable) [size=128]
	Capabilities: <access denied>

06:04.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (rev 01) (prog-if 01)
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns min, 18000ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 23
	Region 0: Memory at b0202800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci
	Kernel modules: sdhci

06:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology Inc: [1524:0520] (rev 01)
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at b0202c00 (32-bit, non-prefetchable) [size=128]
	Capabilities: <access denied>

06:04.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller [1524:0551] (rev 01)
	Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 23
	Region 0: Memory at b0202100 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci
	Kernel modules: sdhci



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.24-1-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.20     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92       tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

linux-image-2.6.24-1-amd64 recommends no packages.

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64: false
  linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk:
  linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory:
  linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false



--- End Message ---
--- Begin Message ---
Version: 2.6.25-1

fixed with newer iwlwifi driver

-- 
maks


--- End Message ---

Reply to: