--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.22-2-686: Since .21, loaded but unused (no devices attached) firewire_ohci, pcmcia prevents uswsusp
- From: Reuben Thomas <rrt@sc3d.org>
- Date: Mon, 22 Oct 2007 22:53:50 +0100
- Message-id: <20071022215350.20751.52897.reportbug@localhost.localdomain>
Package: linux-image-2.6.22-2-686
Version: 2.6.22-4
Severity: minor
Since .21, with which I never had this problem, I have experienced
uswsusp failures because of either of these drivers, despite never
having devices of either sort attached.
I can work around it by blacklisting the modules, but that would no
longer be great if I did want to use either sort of device!
-- Package-specific info:
** Version:
Linux version 2.6.22-2-686 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007
** Not tainted
** Kernel log:
PM: Writing back config space on device 0000:01:08.0 at offset 1 (was 2900000, writing 2900117)
pnp: Failed to activate device 00:03.
pnp: Failed to activate device 00:04.
pnp: Failed to activate device 00:0b.
hda: selected mode 0x45
Restarting tasks ... done.
swsusp: Basic memory bitmaps freed
swsusp: Basic memory bitmaps created
Stopping tasks ... done.
Shrinking memory... -\|done (11557 pages freed)
Freed 46228 kbytes in 0.16 seconds (288.92 MB/s)
Suspending console(s)
usb_device usbdev4.1: PM: suspend 0->1, parent usb4 already 2
usb_endpoint usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2
hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2
usb_endpoint usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2
usb_device usbdev3.1: PM: suspend 0->1, parent usb3 already 2
usb_endpoint usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2
hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2
usb_endpoint usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2
usb_device usbdev2.1: PM: suspend 0->1, parent usb2 already 2
usb_endpoint usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2
hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2
usb_endpoint usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2
usb_device usbdev1.1: PM: suspend 0->1, parent usb1 already 2
usb_endpoint usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2
hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2
usb_endpoint usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Disabling non-boot CPUs ...
swsusp: critical section:
swsusp: Need to copy 62578 pages
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
ACPI: Transitioning device [FN00] to D3
ACPI: Transitioning device [FN00] to D3
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
usb usb4: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 40010100, writing 40050100)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900005, writing 2900003)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.6 to 64
PCMCIA: socket dee98440: *** DANGER *** unable to remove socket power
ACPI: PCI Interrupt 0000:01:03.1[B] -> GSI 18 (level, low) -> IRQ 19
PM: Writing back config space on device 0000:01:05.0 at offset 1 (was 2900116, writing 2900112)
PM: Writing back config space on device 0000:01:08.0 at offset f (was 38080100, writing 38080105)
PM: Writing back config space on device 0000:01:08.0 at offset 5 (was 1, writing cc01)
PM: Writing back config space on device 0000:01:08.0 at offset 4 (was 0, writing fe8fe000)
PM: Writing back config space on device 0000:01:08.0 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:01:08.0 at offset 1 (was 2900000, writing 2900117)
pnp: Failed to activate device 00:03.
pnp: Failed to activate device 00:04.
pnp: Failed to activate device 00:0b.
hda: selected mode 0x45
Restarting tasks ... done.
swsusp: Basic memory bitmaps freed
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 19
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ACPI: PCI interrupt for device 0000:01:05.0 disabled
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 19
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipw2100 65584 0
i915 22432 2
drm 76020 3 i915
binfmt_misc 11112 1
ppdev 8676 0
parport_pc 33796 0
lp 10980 0
parport 33960 3 ppdev,parport_pc,lp
button 7920 0
ac 5188 0
battery 9988 0
cpufreq_powersave 1792 0
cpufreq_stats 5120 0
cpufreq_userspace 4128 0
cpufreq_ondemand 8300 1
cpufreq_conservative 6888 0
microcode 10892 0
michael_mic 2496 4
arc4 2016 4
ecb 3520 4
blkcipher 6244 1 ecb
ieee80211_crypt_tkip 10176 2
ipv6 236964 28
ext2 60232 1
mbcache 8260 1 ext2
dm_snapshot 16516 0
dm_mirror 20928 0
dm_mod 52160 2 dm_snapshot,dm_mirror
speedstep_centrino 9572 0
freq_table 4512 3 cpufreq_stats,cpufreq_ondemand,speedstep_centrino
fuse 41908 1
asus_acpi 16348 0
ieee80211 31592 1 ipw2100
ieee80211_crypt 5792 2 ieee80211_crypt_tkip,ieee80211
firmware_class 9504 2 ipw2100,microcode
yenta_socket 24844 0
tsdev 7968 0
rsrc_nonstatic 11968 1 yenta_socket
pcmcia_core 37108 2 yenta_socket,rsrc_nonstatic
snd_intel8x0m 16684 0
snd_intel8x0 32124 0
snd_ac97_codec 92836 2 snd_intel8x0m,snd_intel8x0
iTCO_wdt 9924 0
ac97_bus 2272 1 snd_ac97_codec
snd_pcm_oss 39200 0
snd_mixer_oss 15424 1 snd_pcm_oss
shpchp 31060 0
pci_hotplug 29184 1 shpchp
intel_agp 23188 1
agpgart 31912 3 drm,intel_agp
rtc 12856 0
snd_pcm 72324 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 21028 1 snd_pcm
snd 48324 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
pcspkr 3104 0
psmouse 36016 0
serio_raw 6692 0
soundcore 7520 1 snd
snd_page_alloc 9512 3 snd_intel8x0m,snd_intel8x0,snd_pcm
evdev 9312 4
reiserfs 220320 1
ide_disk 16512 4
piix 8868 0 [permanent]
generic 4836 0 [permanent]
ide_core 113764 3 ide_disk,piix,generic
e100 33644 0
mii 5280 1 e100
ata_generic 7556 0
firewire_core 38816 0
crc_itu_t 2144 1 firewire_core
libata 115664 1 ata_generic
scsi_mod 136620 1 libata
ehci_hcd 30796 0
uhci_hcd 22960 0
usbcore 125096 3 ehci_hcd,uhci_hcd
thermal 13416 0
processor 31016 2 speedstep_centrino,thermal
fan 4836 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:180a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:180b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1712]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at feb00000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at dc00 [size=8]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1712]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [disabled] [size=128M]
Region 1: Memory at fea80000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1808]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at d480 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1808]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1808]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at d880 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1809]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 20
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=05, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe8fffff
Prefetchable memory behind bridge: de500000-de6fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1808]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1803]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at e000 [size=256]
Region 1: I/O ports at e100 [size=64]
Region 2: Memory at 20000400 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at 20000600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03) (prog-if 00 [Generic])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1716]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at e200 [size=256]
Region 1: I/O ports at e300 [size=128]
Capabilities: <access denied>
01:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c475 [1180:0475] (rev ff) (prog-if ff)
!!! Unknown header type 7f
01:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C551 IEEE 1394 Controller [1180:0551] (rev ff) (prog-if ff)
!!! Unknown header type 7f
01:05.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter [8086:1043] (rev 04)
Subsystem: Intel Corporation MIM2000/Centrino [8086:2527]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VM (MOB) Ethernet Controller [8086:103e] (rev 83)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1745]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at cc00 [size=64]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (700, 'testing'), (600, 'experimental'), (600, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-2-686 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.22-2-686 depends on:
ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.22-2-686 recommends:
ii libc6-i686 2.6.1-1+b1 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.22-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.22-2-686/prerm/would-invalidate-boot-loader-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/elilo-initrd-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/abort-overwrite-2.6.22-2-686:
linux-image-2.6.22-2-686/preinst/lilo-initrd-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/depmod-error-initrd-2.6.22-2-686: false
linux-image-2.6.22-2-686/preinst/overwriting-modules-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/failed-to-move-modules-2.6.22-2-686:
linux-image-2.6.22-2-686/preinst/bootloader-initrd-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/create-kimage-link-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/bootloader-error-2.6.22-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.22-2-686/postinst/old-dir-initrd-link-2.6.22-2-686: true
linux-image-2.6.22-2-686/prerm/removing-running-kernel-2.6.22-2-686: true
linux-image-2.6.22-2-686/preinst/initrd-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/depmod-error-2.6.22-2-686: false
linux-image-2.6.22-2-686/preinst/already-running-this-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/old-initrd-link-2.6.22-2-686: true
linux-image-2.6.22-2-686/postinst/bootloader-test-error-2.6.22-2-686:
linux-image-2.6.22-2-686/preinst/abort-install-2.6.22-2-686:
linux-image-2.6.22-2-686/postinst/old-system-map-link-2.6.22-2-686: true
--- End Message ---