Bug#485784: some more information
uname -a:
Linux moeg 2.6.18-6-k7 #1 SMP Sun Feb 10 22:16:15 UTC 2008 i686 GNU/
Linux
lspci -v:
00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev c1)
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [40] AGP version 2.0
Capabilities: [60] HyperTransport: Host or Secondary Interface
Kernel driver in use: agpgart-nvidia
Kernel modules: nvidia-agp, ipmi_si
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
(rev c1)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: 66MHz, fast devsel
Kernel modules: ipmi_si
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
(rev c1)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: 66MHz, fast devsel
Kernel modules: ipmi_si
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
(rev c1)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: 66MHz, fast devsel
Kernel modules: ipmi_si
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
(rev c1)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: 66MHz, fast devsel
Kernel modules: ipmi_si
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
(rev c1)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: 66MHz, fast devsel
Kernel modules: ipmi_si
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [48] HyperTransport: Slave or Primary Interface
Kernel modules: ipmi_si
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: 66MHz, fast devsel, IRQ 255
I/O ports at c400 [size=32]
Capabilities: [44] Power Management version 2
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2, ipmi_si
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4) (prog-if 10)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
Memory at e0003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4) (prog-if 10)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 185
Memory at e0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4) (prog-if 20)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 193
Memory at e0005000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0080
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd, ipmi_si
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
Controller (rev a1)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
Memory at e0000000 (32-bit, non-prefetchable) [size=4K]
I/O ports at b000 [size=8]
Capabilities: [44] Power Management version 2
Kernel driver in use: forcedeth
Kernel modules: forcedeth, ipmi_si
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
Audio Controler (MCP) (rev a1)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 185
I/O ports at b400 [size=256]
I/O ports at b800 [size=128]
Memory at e0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: Intel ICH
Kernel modules: i810_audio, snd-intel8x0, ipmi_si
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
(rev a3)
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-0000afff
Memory behind bridge: de000000-dfffffff
Prefetchable memory behind bridge: 30000000-300fffff
Kernel modules: ipmi_si, shpchp
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-
if 8a [Master SecP PriP])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 0531
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx, sata_nv
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
Flags: bus master, 66MHz, medium devsel, latency 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: dc000000-ddffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Kernel modules: ipmi_si, shpchp
01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8129
(rev 10)
Subsystem: Coreco Inc Device 8129
Flags: bus master, medium devsel, latency 32, IRQ 201
I/O ports at 9000 [size=256]
Memory at df040000 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: 8139too
Kernel modules: r8169, 8139too, ipmi_si
01:08.0 Ethernet controller: Intel Corporation 82541PI Gigabit
Ethernet Controller (rev 05)
Subsystem: Intel Corporation Device 1376
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 209
Memory at df020000 (32-bit, non-prefetchable) [size=128K]
Memory at df000000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 9400 [size=64]
[virtual] Expansion ROM at 30080000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Kernel driver in use: e1000
Kernel modules: e1000, ipmi_si
01:09.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/
SATARaid] Serial ATA Controller (rev 02)
Subsystem: Silicon Image, Inc. Device 6114
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 217
I/O ports at 9800 [size=8]
I/O ports at 9c00 [size=4]
I/O ports at a000 [size=8]
I/O ports at a400 [size=4]
I/O ports at a800 [size=16]
Memory at df041000 (32-bit, non-prefetchable) [size=1K]
[virtual] Expansion ROM at 30000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Kernel driver in use: sata_sil
Kernel modules: ipmi_si, sata_sil
02:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
MX/MX 400] (rev a1)
Subsystem: PROLINK Microsystems Corp Device 1081
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 12
Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at dd000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
Kernel modules: ipmi_si, nvidiafb
dmesg:
ded physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000
(reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of
256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F6F60, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 1FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: DSDT 1FFF30C0, 478E (r1 NVIDIA AWRDACPI 1000
MSFT 100000E)
[ 0.000000] ACPI: FACS 1FFF0000, 0040
[ 0.000000] ACPI: APIC 1FFF7880, 006E (r1 Nvidia AWRDACPI 42302E31
AWRD 0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000,
GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high
edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high
edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 130033
[ 0.000000] Kernel command line: root=/dev/hdc1 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1829.995 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6,
262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.004000] Memory: 510536k/524224k available (1752k kernel code,
13152k reserved, 728k data, 252k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.004000] .init : 0xc0375000 - 0xc03b4000 ( 252 kB)
[ 0.004000] .data : 0xc02b63da - 0xc036c640 ( 728 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02b63da (1752 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084008] Calibrating delay using timer specific routine..
3663.47 BogoMIPS (lpj=7326953)
[ 0.084148] Security Framework initialized
[ 0.084201] SELinux: Disabled at boot.
[ 0.084252] Capability LSM initialized
[ 0.084316] Mount-cache hash table entries: 512
[ 0.084531] Initializing cgroup subsys ns
[ 0.084582] Initializing cgroup subsys cpuacct
[ 0.084650] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.084704] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084755] Intel machine check architecture supported.
[ 0.084806] Intel machine check reporting enabled on CPU#0.
[ 0.084861] Compat vDSO mapped to ffffe000.
[ 0.084916] Checking 'hlt' instruction... OK.
[ 0.100224] SMP alternatives: switching to UP code
[ 0.101833] Freeing SMP alternatives: 16k freed
[ 0.101885] ACPI: Core revision 20070126
[ 0.110101] CPU0: AMD Athlon(tm) XP 2500+ stepping 00
[ 0.110248] Total of 1 processors activated (3663.47 BogoMIPS).
[ 0.110496] ENABLING IO-APIC IRQs
[ 0.110739] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.152009] APIC calibration not consistent with PM Timer: 96ms
instead of 100ms
[ 0.152009] APIC delta adjusted to PM-Timer: 2079542 (1996472)
[ 0.152009] Brought up 1 CPUs
[ 0.152009] CPU0 attaching sched-domain:
[ 0.152009] domain 0: span 01
[ 0.152009] groups: 01
[ 0.152009] net_namespace: 548 bytes
[ 0.152009] Booting paravirtualized kernel on bare hardware
[ 0.152009] NET: Registered protocol family 16
[ 0.152009] ACPI: bus type pci registered
[ 0.184199] PCI: PCI BIOS revision 2.10 entry at 0xfb590, last bus=2
[ 0.184251] PCI: Using configuration type 1
[ 0.184303] Setting up standard PCI resources
[ 0.191386] ACPI: EC: Look up EC in DSDT
[ 0.198667] ACPI: Interpreter enabled
[ 0.198718] ACPI: (supports S0 S1 S4 S5)
[ 0.198921] ACPI: Using IOAPIC for interrupt routing
[ 0.210473] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.210615] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[ 0.211503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.211694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.211938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.277416] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11
12 14 15)
[ 0.278095] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11
12 14 15)
[ 0.278770] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11
12 14 15)
[ 0.279448] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11
*12 14 15)
[ 0.280131] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.280885] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11
12 14 15)
[ 0.281559] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11
*12 14 15)
[ 0.282233] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11
*12 14 15)
[ 0.282909] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.283662] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11
12 14 15)
[ 0.284335] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.285086] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.285839] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11
12 14 15)
[ 0.286515] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.287267] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.288044] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.288772] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[ 0.289087] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 0.289400] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 0.289713] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 0.290037] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.290459] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 0.290949] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 0.291438] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 0.291925] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0,
disabled.
[ 0.292432] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 0.292920] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0,
disabled.
[ 0.293378] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 0.293795] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 0.294283] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0,
disabled.
[ 0.294810] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0,
disabled.
[ 0.295334] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0,
disabled.
[ 0.295823] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.295912] pnp: PnP ACPI init
[ 0.295969] ACPI: bus type pnp registered
[ 0.303317] pnp: PnP ACPI: found 16 devices
[ 0.303367] ACPI: ACPI bus type pnp unregistered
[ 0.303419] PnPBIOS: Disabled by ACPI PNP
[ 0.303769] PCI: Using ACPI for IRQ routing
[ 0.303821] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[ 0.344178] ACPI: RTC can wake from S4
[ 0.344255] system 00:00: ioport range 0x4000-0x407f has been
reserved
[ 0.344308] system 00:00: ioport range 0x4080-0x40ff has been
reserved
[ 0.344360] system 00:00: ioport range 0x4400-0x447f has been
reserved
[ 0.344413] system 00:00: ioport range 0x4480-0x44ff has been
reserved
[ 0.344465] system 00:00: ioport range 0x4200-0x427f has been
reserved
[ 0.344517] system 00:00: ioport range 0x4280-0x42ff has been
reserved
[ 0.344572] system 00:01: ioport range 0x5000-0x503f has been
reserved
[ 0.344624] system 00:01: ioport range 0x5100-0x513f has been
reserved
[ 0.344680] system 00:02: iomem range 0xd7800-0xd7fff has been
reserved
[ 0.344732] system 00:02: iomem range 0xf0000-0xf7fff could not be
reserved
[ 0.344785] system 00:02: iomem range 0xf8000-0xfbfff could not be
reserved
[ 0.344837] system 00:02: iomem range 0xfc000-0xfffff could not be
reserved
[ 0.344890] system 00:02: iomem range 0x1fff0000-0x1fffffff could
not be reserved
[ 0.344950] system 00:02: iomem range 0xffff0000-0xffffffff could
not be reserved
[ 0.345009] system 00:02: iomem range 0x0-0x9ffff could not be
reserved
[ 0.345061] system 00:02: iomem range 0x100000-0x1ffeffff could not
be reserved
[ 0.345120] system 00:02: iomem range 0xfec00000-0xfec00fff could
not be reserved
[ 0.345180] system 00:02: iomem range 0xfee00000-0xfee00fff could
not be reserved
[ 0.345242] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.345294] system 00:04: ioport range 0x800-0x805 has been reserved
[ 0.346320] system 00:04: ioport range 0x290-0x297 has been reserved
[ 0.377939] PCI: Bridge: 0000:00:08.0
[ 0.377988] IO window: 9000-afff
[ 0.378039] MEM window: 0xde000000-0xdfffffff
[ 0.378089] PREFETCH window: disabled.
[ 0.378141] PCI: Bridge: 0000:00:1e.0
[ 0.378188] IO window: disabled.
[ 0.378237] MEM window: 0xdc000000-0xddffffff
[ 0.378288] PREFETCH window: 0x00000000d0000000-0x00000000d7ffffff
[ 0.378349] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 0.378374] NET: Registered protocol family 2
[ 0.378523] IP route cache hash table entries: 4096 (order: 2,
16384 bytes)
[ 0.378808] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.379061] TCP bind hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.379301] TCP: Hash tables configured (established 16384 bind
16384)
[ 0.379353] TCP reno registered
[ 0.379581] checking if image is initramfs... it is
[ 0.863993] Freeing initrd memory: 5481k freed
[ 0.864909] audit: initializing netlink socket (disabled)
[ 0.864974] type=2000 audit(1213205726.864:1): initialized
[ 0.865148] Total HugeTLB memory allocated, 0
[ 0.865263] VFS: Disk quotas dquot_6.5.1
[ 0.865341] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.865491] io scheduler noop registered
[ 0.865540] io scheduler anticipatory registered
[ 0.865589] io scheduler deadline registered
[ 0.865645] io scheduler cfq registered (default)
[ 0.880069] Switched to high resolution mode on CPU 0
[ 0.899944] pci 0000:02:00.0: Boot video device
[ 0.899944] isapnp: Scanning for PnP cards...
[ 1.251062] isapnp: No Plug & Play device found
[ 1.254223] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[ 1.254425] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.254607] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.255076] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.255312] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.256473] brd: module loaded
[ 1.256621] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.256674] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 1.257171] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.257370] mice: PS/2 mouse device common for all mice
[ 1.257469] cpuidle: using governor ladder
[ 1.257518] cpuidle: using governor menu
[ 1.258016] TCP cubic registered
[ 1.258072] NET: Registered protocol family 1
[ 1.258130] NET: Registered protocol family 17
[ 1.258185] Using IPI No-Shortcut mode
[ 1.258391] registered taskstats version 1
[ 1.258881] Freeing unused kernel memory: 252k freed
[ 1.282923] input: AT Translated Set 2 keyboard as /class/input/
input0
[ 1.340352] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 1.340414] ACPI: Fan [FAN] (on)
[ 1.344771] ACPI: ACPI0007:00 is registered as cooling_device1
[ 1.346628] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.346881] ACPI: Thermal Zone [THRM] (33 C)
[ 1.928118] usbcore: registered new interface driver usbfs
[ 1.928211] usbcore: registered new interface driver hub
[ 1.939386] usbcore: registered new device driver usb
[ 1.952147] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 1.952595] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 1.952659] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] ->
GSI 22 (level, high) -> IRQ 22
[ 1.952804] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.952808] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.953030] ohci_hcd 0000:00:02.0: new USB bus registered, assigned
bus number 1
[ 1.953111] ohci_hcd 0000:00:02.0: irq 22, io mem 0xe0003000
[ 1.999301] No dock devices found.
[ 2.010171] usb usb1: configuration #1 chosen from 1 choice
[ 2.010256] hub 1-0:1.0: USB hub found
[ 2.010318] hub 1-0:1.0: 3 ports detected
[ 2.023417] SCSI subsystem initialized
[ 2.050485] libata version 3.00 loaded.
[ 2.050590] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 2.050647] Copyright (c) 1999-2006 Intel Corporation.
[ 2.112160] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.112221] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.112280] usb usb1: Product: OHCI Host Controller
[ 2.112329] usb usb1: Manufacturer: Linux 2.6.25-2-686 ohci_hcd
[ 2.112379] usb usb1: SerialNumber: 0000:00:02.0
[ 2.112872] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 2.112930] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] ->
GSI 21 (level, high) -> IRQ 21
[ 2.113080] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 2.113084] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 2.113164] ohci_hcd 0000:00:02.1: new USB bus registered, assigned
bus number 2
[ 2.113244] ohci_hcd 0000:00:02.1: irq 21, io mem 0xe0004000
[ 2.155749] FDC 0 is a post-1991 82077
[ 2.170182] usb usb2: configuration #1 chosen from 1 choice
[ 2.170268] hub 2-0:1.0: USB hub found
[ 2.170328] hub 2-0:1.0: 3 ports detected
[ 2.273764] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.273764] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.273764] usb usb2: Product: OHCI Host Controller
[ 2.273764] usb usb2: Manufacturer: Linux 2.6.25-2-686 ohci_hcd
[ 2.273764] usb usb2: SerialNumber: 0000:00:02.1
[ 2.273764] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.61.
[ 2.273764] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[ 2.273764] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] ->
GSI 20 (level, high) -> IRQ 20
[ 2.273764] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 2.791292] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1,
addr 00:30:1b:35:f1:62
[ 2.791292] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[ 2.791292] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 2.791292] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 2.791292] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] ->
GSI 18 (level, high) -> IRQ 18
[ 2.791292] PCI: cache line size of 64 is not supported by device
0000:01:06.0
[ 2.791292] ACPI: PCI interrupt for device 0000:01:06.0 disabled
[ 2.791292] r8169: probe of 0000:01:06.0 failed with error -22
[ 2.791292] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 2.791292] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] ->
GSI 16 (level, high) -> IRQ 16
[ 2.792310] 8139too Fast Ethernet driver 0.9.28
[ 3.047321] e1000: 0000:01:08.0: e1000_probe: (PCI:33MHz:32-bit)
00:0e:0c:c0:44:61
[ 3.219386] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network
Connection
[ 3.219386] sata_sil 0000:01:09.0: version 2.3
[ 3.219386] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 3.219386] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] ->
GSI 17 (level, high) -> IRQ 17
[ 3.219386] scsi0 : sata_sil
[ 3.224010] scsi1 : sata_sil
[ 3.224246] Uniform Multi-Platform E-IDE driver
[ 3.224297] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 3.224742] scsi2 : sata_sil
[ 3.224911] scsi3 : sata_sil
[ 3.224990] ata1: SATA max UDMA/100 mmio m1024@0xdf041000 tf
0xdf041080 irq 17
[ 3.225052] ata2: SATA max UDMA/100 mmio m1024@0xdf041000 tf
0xdf0410c0 irq 17
[ 3.225112] ata3: SATA max UDMA/100 mmio m1024@0xdf041000 tf
0xdf041280 irq 17
[ 3.225173] ata4: SATA max UDMA/100 mmio m1024@0xdf041000 tf
0xdf0412c0 irq 17
[ 3.805331] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.813471] ata1.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[ 3.813471] ata1.00: 390721968 sectors, multi 16: LBA48
[ 3.828622] ata1.00: configured for UDMA/100
[ 4.295816] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4.306412] ata2.00: ATA-7: Maxtor 6Y160M0, YAR51BW0, max UDMA/133
[ 4.306412] ata2.00: 320173056 sectors, multi 16: LBA48
[ 4.321598] ata2.00: configured for UDMA/100
[ 4.904264] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4.912182] ata3.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[ 4.912182] ata3.00: 390721968 sectors, multi 16: LBA48
[ 4.927338] ata3.00: configured for UDMA/100
[ 5.507389] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 5.515313] ata4.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[ 5.515313] ata4.00: 390721968 sectors, multi 16: LBA48
[ 5.530473] ata4.00: configured for UDMA/100
[ 5.530473] scsi 0:0:0:0: Direct-Access ATA
ST3200822AS 3.01 PQ: 0 ANSI: 5
[ 5.530473] scsi 1:0:0:0: Direct-Access ATA Maxtor
6Y160M0 YAR5 PQ: 0 ANSI: 5
[ 5.530473] scsi 2:0:0:0: Direct-Access ATA
ST3200822AS 3.01 PQ: 0 ANSI: 5
[ 5.530473] scsi 3:0:0:0: Direct-Access ATA
ST3200822AS 3.01 PQ: 0 ANSI: 5
[ 5.530473] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] ->
GSI 18 (level, high) -> IRQ 18
[ 5.530473] eth2: RealTek RTL8129 at 0x9000, 00:50:fc:30:3b:f0, IRQ
18
[ 5.530473] eth2: Identified 8139 chip type 'RTL-8139C'
[ 5.538512] eth2: No MII transceivers found! Assuming SYM
transceiver.
[ 5.540259] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 5.540313] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] ->
GSI 22 (level, high) -> IRQ 22
[ 5.540455] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 5.540459] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 5.540546] ehci_hcd 0000:00:02.2: new USB bus registered, assigned
bus number 3
[ 5.540645] ehci_hcd 0000:00:02.2: debug port 1
[ 5.540697] PCI: cache line size of 64 is not supported by device
0000:00:02.2
[ 5.540707] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe0005000
[ 5.550512] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 5.550728] usb usb3: configuration #1 chosen from 1 choice
[ 5.550807] hub 3-0:1.0: USB hub found
[ 5.550868] hub 3-0:1.0: 6 ports detected
[ 5.574298] Driver 'sd' needs updating - please use bus_type methods
[ 5.574597] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors
(200050 MB)
[ 5.574668] sd 0:0:0:0: [sda] Write Protect is off
[ 5.574718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.574748] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.574879] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors
(200050 MB)
[ 5.574947] sd 0:0:0:0: [sda] Write Protect is off
[ 5.574997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.575025] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.575087] sda: sda1
[ 5.586352] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.586511] sd 1:0:0:0: [sdb] 320173056 512-byte hardware sectors
(163929 MB)
[ 5.586582] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.586632] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.586663] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.586790] sd 1:0:0:0: [sdb] 320173056 512-byte hardware sectors
(163929 MB)
[ 5.586858] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.586909] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.586937] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.586999] sdb: sdb1
[ 5.593610] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.593755] sd 2:0:0:0: [sdc] 390721968 512-byte hardware sectors
(200050 MB)
[ 5.593826] sd 2:0:0:0: [sdc] Write Protect is off
[ 5.593877] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.593905] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.594027] sd 2:0:0:0: [sdc] 390721968 512-byte hardware sectors
(200050 MB)
[ 5.594094] sd 2:0:0:0: [sdc] Write Protect is off
[ 5.594145] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.594172] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.594234] sdc: sdc1
[ 5.600375] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 5.600488] sd 3:0:0:0: [sdd] 390721968 512-byte hardware sectors
(200050 MB)
[ 5.600556] sd 3:0:0:0: [sdd] Write Protect is off
[ 5.600606] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 5.600634] sd 3:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.600743] sd 3:0:0:0: [sdd] 390721968 512-byte hardware sectors
(200050 MB)
[ 5.600810] sd 3:0:0:0: [sdd] Write Protect is off
[ 5.600860] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 5.600888] sd 3:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.600951] sdd: sdd1
[ 5.605721] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 5.654625] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002
[ 5.654686] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.654745] usb usb3: Product: EHCI Host Controller
[ 5.654794] usb usb3: Manufacturer: Linux 2.6.25-2-686 ehci_hcd
[ 5.654845] usb usb3: SerialNumber: 0000:00:02.2
[ 5.654957] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 5.655010] NFORCE2: IDE controller (0x10de:0x0065 rev 0xa2) at
PCI slot 0000:00:09.0
[ 5.655097] NFORCE2: not 100% native mode: will probe irqs later
[ 5.655150] NFORCE2: BIOS didn't set cable bits correctly. Enabling
workaround.
[ 5.655219] ide0: BM-DMA at 0xf000-0xf007, BIOS settings:
hda:DMA, hdb:DMA
[ 5.655321] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings:
hdc:DMA, hdd:DMA
[ 5.655420] Probing IDE interface ide0...
[ 6.389214] hda: _NEC DVD_RW ND-3520AW, ATAPI CD/DVD-ROM drive
[ 7.065175] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 7.065175] hda: UDMA/33 mode selected
[ 7.065175] Probing IDE interface ide1...
[ 7.355083] hdc: ExcelStor Technology J360, ATA DISK drive
[ 7.634805] hdd: WDC WD2000JB-00FUA0, ATA DISK drive
[ 7.690581] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 7.690581] hdc: UDMA/100 mode selected
[ 7.690581] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 7.690581] hdd: UDMA/100 mode selected
[ 7.690581] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 7.690581] ide1 at 0x170-0x177,0x376 on irq 15
[ 7.723357] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 7.723631] Uniform CD-ROM driver Revision: 3.20
[ 7.733723] hdc: max request size: 512KiB
[ 7.741846] hdc: 120103200 sectors (61492 MB) w/1821KiB Cache,
CHS=16383/255/63
[ 7.742764] hdc: cache flushes supported
[ 7.742764] hdc: hdc1 hdc2 hdc3 hdc4
[ 7.754911] hdd: max request size: 512KiB
[ 7.767498] hdd: 390721968 sectors (200049 MB) w/8192KiB Cache,
CHS=24321/255/63
[ 7.769262] hdd: cache flushes supported
[ 7.769262] hdd: hdd1
[ 8.234904] PM: Starting manual resume from disk
[ 8.284064] kjournald starting. Commit interval 5 seconds
[ 8.284064] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.764471] Linux agpgart interface v0.103
[ 10.793919] agpgart: Detected NVIDIA nForce2 chipset
[ 10.798604] agpgart: AGP aperture is 64M @ 0xd8000000
[ 11.067634] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 11.067709] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100
[ 11.178478] input: Power Button (FF) as /class/input/input1
[ 11.210270] ACPI: Power Button (FF) [PWRF]
[ 11.210414] input: Power Button (CM) as /class/input/input2
[ 11.242288] ACPI: Power Button (CM) [PWRB]
[ 11.242431] input: Sleep Button (CM) as /class/input/input3
[ 11.270278] ACPI: Sleep Button (CM) [SLPB]
[ 11.924048] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.933336] shpchp: Standard Hot Plug PCI Controller Driver
version: 0.4
[ 12.039735] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[ 12.039795] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] ->
GSI 21 (level, high) -> IRQ 21
[ 12.039952] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 12.062276] input: PC Speaker as /class/input/input4
[ 12.151222] Real Time Clock Driver v1.12ac
[ 12.362301] intel8x0_measure_ac97_clock: measured 52736 usecs
[ 12.362360] intel8x0: clocking to 47463
[ 12.412126] parport_pc 00:0c: reported by Plug and Play ACPI
[ 12.412233] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 14.531172] Adding 2931852k swap on /dev/hdc3. Priority:-1 extents:
1 across:2931852k
[ 15.020857] EXT3 FS on hdc1, internal journal
[ 15.579820] loop: module loaded
[ 15.680877] device-mapper: uevent: version 1.0.3
[ 15.682057] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18)
initialised: dm-devel@redhat.com
[ 16.334920] kjournald starting. Commit interval 5 seconds
[ 16.335138] EXT3 FS on hdc4, internal journal
[ 16.335138] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.363307] kjournald starting. Commit interval 5 seconds
[ 16.363535] EXT3 FS on hdc2, internal journal
[ 16.363535] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.443905] ReiserFS: hdd1: found reiserfs format "3.6" with
standard journal
[ 16.443905] ReiserFS: hdd1: using ordered data mode
[ 16.450501] ReiserFS: hdd1: journal params: device hdd1, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 16.450501] ReiserFS: hdd1: checking transaction log (hdd1)
[ 16.512474] ReiserFS: hdd1: Using r5 hash to sort names
[ 16.597115] kjournald starting. Commit interval 5 seconds
[ 16.604048] EXT3 FS on sda1, internal journal
[ 16.604048] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.604311] ReiserFS: sdb1: found reiserfs format "3.6" with
standard journal
[ 16.604311] ReiserFS: sdb1: using ordered data mode
[ 16.626926] ReiserFS: sdb1: journal params: device sdb1, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 16.627753] ReiserFS: sdb1: checking transaction log (sdb1)
[ 16.692116] ReiserFS: sdb1: Using r5 hash to sort names
[ 16.748264] ReiserFS: sdc1: found reiserfs format "3.6" with
standard journal
[ 16.748264] ReiserFS: sdc1: using ordered data mode
[ 16.773614] ReiserFS: sdc1: journal params: device sdc1, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 16.773614] ReiserFS: sdc1: checking transaction log (sdc1)
[ 16.831240] ReiserFS: sdc1: Using r5 hash to sort names
[ 16.895580] kjournald starting. Commit interval 5 seconds
[ 16.895580] EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
[ 16.900850] EXT3 FS on sdd1, internal journal
[ 16.900850] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.421641] eth2: link up, 10Mbps, half-duplex, lpa 0x0000
[ 18.130599] NET: Registered protocol family 10
[ 18.131222] lo: Disabled Privacy Extensions
[ 18.366171] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps
Full Duplex, Flow Control: RX/TX
[ 18.366440] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.366751] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 19.665918] ACPI: WMI: Mapper loaded
[ 19.967732] warning: `lwresd' uses 32-bit capabilities (legacy
support in use)
[ 28.834355] eth2: no IPv6 routers present
[ 29.059395] eth1: no IPv6 routers present
Reply to: