Bug#473800: ehci-hcd: ehci reset
Package: linux-image-2.6.25-2-686
Version: 2.6.25-4
Followup-For: Bug #473800
[ 2195.800254] scsi 16:0:0:0: Direct-Access SAMSUNG SP1213N
TL10 PQ: 0 ANSI: 0 CCS
[ 2195.812216] sd 16:0:0:0: [sda] 234493056 512-byte hardware sectors
(120060 MB)
[ 2195.812954] sd 16:0:0:0: [sda] Write Protect is off
[ 2195.813056] sd 16:0:0:0: [sda] Assuming drive cache: write through
[ 2195.814279] sd 16:0:0:0: [sda] 234493056 512-byte hardware sectors
(120060 MB)
[ 2195.815267] sd 16:0:0:0: [sda] Write Protect is off
[ 2195.815344] sd 16:0:0:0: [sda] Assuming drive cache: write through
[ 2195.815436] sda:<6>usb 1-1: reset high speed USB device using ehci_hcd
and address 2
pci:
00:10.4 0c03: 1106:3104 (rev 86)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
usb:
Bus 002 Device 002: ID 04cf:8818 Myson Century, Inc. USB2.0 to ATAPI Bridge
Controller
-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-4) (maks@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Tue May 27 15:38:35 UTC 2008
** Command line:
BOOT_IMAGE=Linux ro root=fe00
** Tainted: P (1)
** Kernel log:
[ 2187.872031] sd 15:0:0:0: [sda] Attached SCSI disk
[ 2187.873982] ehci_hcd 0000:00:10.4: USB bus 5 deregistered
[ 2187.874124] ACPI: PCI interrupt for device 0000:00:10.4 disabled
[ 2190.265403] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 2190.265590] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2190.268343] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 2190.268486] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdfff000
[ 2190.279302] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2190.279302] usb usb1: configuration #1 chosen from 1 choice
[ 2190.279302] hub 1-0:1.0: USB hub found
[ 2190.279302] hub 1-0:1.0: 8 ports detected
[ 2190.379472] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2190.379545] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2190.379614] usb usb1: Product: EHCI Host Controller
[ 2190.379671] usb usb1: Manufacturer: Linux 2.6.25-2-686 ehci_hcd
[ 2190.379729] usb usb1: SerialNumber: 0000:00:10.4
[ 2190.622854] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2190.754864] usb 1-1: configuration #1 chosen from 1 choice
[ 2190.761820] scsi16 : SCSI emulation for USB Mass Storage devices
[ 2190.771874] usb-storage: device found at 2
[ 2190.771881] usb-storage: waiting for device to settle before scanning
[ 2190.772421] usb 1-1: New USB device found, idVendor=04cf, idProduct=8818
[ 2190.772497] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2190.772563] usb 1-1: Product: USB Mass Storage Device
[ 2190.772623] usb 1-1: Manufacturer: Myson Century, Inc.
[ 2190.772684] usb 1-1: SerialNumber: 100
[ 2190.971835] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2190.971835] hub 1-0:1.0: over-current change on port 5
[ 2191.074793] hub 1-0:1.0: over-current change on port 6
[ 2191.178271] hub 1-0:1.0: over-current change on port 7
[ 2191.281691] hub 1-0:1.0: over-current change on port 8
[ 2195.795024] usb-storage: device scan complete
[ 2195.800254] scsi 16:0:0:0: Direct-Access SAMSUNG SP1213N TL10 PQ: 0 ANSI: 0 CCS
[ 2195.812216] sd 16:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB)
[ 2195.812954] sd 16:0:0:0: [sda] Write Protect is off
[ 2195.813032] sd 16:0:0:0: [sda] Mode Sense: 00 14 00 00
[ 2195.813056] sd 16:0:0:0: [sda] Assuming drive cache: write through
[ 2195.814279] sd 16:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB)
[ 2195.815267] sd 16:0:0:0: [sda] Write Protect is off
[ 2195.815341] sd 16:0:0:0: [sda] Mode Sense: 00 14 00 00
[ 2195.815344] sd 16:0:0:0: [sda] Assuming drive cache: write through
[ 2195.815436] sda:<6>usb 1-1: reset high speed USB device using ehci_hcd and address 2
[ 2256.732656] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[ 2264.688525] USB Universal Host Controller Interface driver v3.0
[ 2264.688693] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 2264.688874] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2264.688987] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2264.689088] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000f800
[ 2264.689316] usb usb2: configuration #1 chosen from 1 choice
[ 2264.689419] hub 2-0:1.0: USB hub found
[ 2264.689488] hub 2-0:1.0: 2 ports detected
[ 2264.796618] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2264.796696] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2264.796767] usb usb2: Product: UHCI Host Controller
[ 2264.796826] usb usb2: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 2264.796886] usb usb2: SerialNumber: 0000:00:10.0
[ 2264.797005] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 2264.797183] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2264.797283] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2264.797383] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000f400
[ 2264.797609] usb usb3: configuration #1 chosen from 1 choice
[ 2264.797705] hub 3-0:1.0: USB hub found
[ 2264.797778] hub 3-0:1.0: 2 ports detected
[ 2264.900628] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2264.900703] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2264.900774] usb usb3: Product: UHCI Host Controller
[ 2264.900833] usb usb3: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 2264.900893] usb usb3: SerialNumber: 0000:00:10.1
[ 2264.901007] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 2264.901181] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2264.901277] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2264.901377] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f000
[ 2264.901601] usb usb4: configuration #1 chosen from 1 choice
[ 2264.901699] hub 4-0:1.0: USB hub found
[ 2264.901771] hub 4-0:1.0: 2 ports detected
[ 2265.004919] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2265.004996] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2265.005067] usb usb4: Product: UHCI Host Controller
[ 2265.005125] usb usb4: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 2265.005184] usb usb4: SerialNumber: 0000:00:10.2
[ 2265.005302] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 2265.005477] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2265.005575] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 2265.005676] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00
[ 2265.005894] usb usb5: configuration #1 chosen from 1 choice
[ 2265.005992] hub 5-0:1.0: USB hub found
[ 2265.006063] hub 5-0:1.0: 2 ports detected
[ 2265.120645] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2265.120719] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2265.120790] usb usb5: Product: UHCI Host Controller
[ 2265.120848] usb usb5: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 2265.120908] usb usb5: SerialNumber: 0000:00:10.3
[ 2265.432397] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 2265.606476] usb 3-2: configuration #1 chosen from 1 choice
[ 2265.621715] input: USB Mouse as /class/input/input8
[ 2265.646928] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:10.1-2
[ 2265.647285] usb 3-2: New USB device found, idVendor=05e3, idProduct=1205
[ 2265.647349] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2265.647411] usb 3-2: Product: USB Mouse
[ 2287.244950] usb 1-1: reset high speed USB device using ehci_hcd and address 2
** Loaded modules:
Module Size Used by
uhci_hcd 22352 0
ehci_hcd 32620 0
usbhid 40192 0
sd_mod 26072 1
usb_storage 76832 2
ext2 64712 0
nvidia 4709776 18
battery 8448 0
ac 4448 0
wmi 7880 0
video 19728 0
output 3712 1 video
container 4736 0
sbs 8544 0
sbshc 6784 1 sbs
ipv6 241956 19
fuse 44348 1
w83627hf 23512 0
hwmon_vid 3040 1 w83627hf
eeprom 7024 0
loop 16708 0
snd_via82xx 26424 0
gameport 14124 1 snd_via82xx
snd_ac97_codec 91300 1 snd_via82xx
ac97_bus 1952 1 snd_ac97_codec
snd_pcm_oss 37824 0
snd_mixer_oss 14880 1 snd_pcm_oss
snd_pcm 68228 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 9992 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7968 1 snd_via82xx
snd_seq_dummy 3780 0
snd_seq_oss 28544 0
parport_pc 25860 0
parport 33868 1 parport_pc
snd_seq_midi 8064 0
snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
snd_seq 45872 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 21320 2 snd_pcm,snd_seq
snd_rawmidi 22528 2 snd_mpu401_uart,snd_seq_midi
snd_seq_device 7564 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
pcspkr 3136 0
rtc 14272 0
snd 48772 11 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_seq,snd_timer,snd_rawmidi,snd_seq_device
soundcore 7488 1 snd
i2c_viapro 8308 0
i2c_core 22548 3 nvidia,eeprom,i2c_viapro
shpchp 29716 0
pci_hotplug 26980 1 shpchp
button 8240 0
via_agp 9888 1
agpgart 31720 2 nvidia,via_agp
evdev 11328 4
ext3 120264 1
jbd 43444 1 ext3
mbcache 8260 2 ext2,ext3
dm_mirror 25316 0
dm_snapshot 17444 0
dm_mod 55656 7 dm_mirror,dm_snapshot
hid 36032 1 usbhid
ff_memless 5384 1 usbhid
ide_disk 13952 2
scsi_mod 138508 2 sd_mod,usb_storage
dock 10448 0
floppy 53284 0
via_rhine 22856 0
mii 5248 1 via_rhine
usbcore 130032 5 uhci_hcd,ehci_hcd,usbhid,usb_storage
via82cxxx 7940 0 [permanent]
ide_pci_generic 4228 0 [permanent]
ide_core 100312 3 ide_disk,via82cxxx,ide_pci_generic
thermal 19100 0
processor 39660 1 thermal
fan 5636 0
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314]
Subsystem: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [80] AGP version 3.5
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: via-agp
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI Bridge [1106:b198]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb000000-fcffffff
Prefetchable memory behind bridge: e0000000-efffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: shpchp
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at f800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at f400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at f000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at ec00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7104]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: i2c-viapro
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: Micro-Star International Co., Ltd. Device [1462:b014]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at e800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at fdffe000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
Kernel modules: via-rhine
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV17 [GeForce4 MX 460] [10de:0170] (rev a3)
Subsystem: ABIT Computer Corp. Device [147b:8f03]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at eff80000 (32-bit, prefetchable) [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=8 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92b tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.25-2-686 recommends:
ii libc6-i686 2.7-11 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false
linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false
Reply to: