Your message dated Tue, 3 Jun 2008 10:01:53 +0200 with message-id <200806031001.56277.didier@raboud.com> and subject line Re: Bug#483375: linux-image-2.6.25-2-amd64: 2.6.25-4 broke cpu frequency scaling has caused the Debian Bug report #483375, regarding linux-image-2.6.25-2-amd64: 2.6.25-4 broke cpu frequency scaling to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 483375: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=483375 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.25-2-amd64: 2.6.25-4 broke cpu frequency scaling
- From: Didier Raboud <didier@raboud.com>
- Date: Wed, 28 May 2008 16:23:39 +0200
- Message-id: <20080528142339.24425.70831.reportbug@Tamino>
Package: linux-image-2.6.25-2-amd64 Version: 2.6.25-4 Severity: normal Hi, with latest update of linux-image-2.6.25-2-amd4, I lost the folders /sys/devices/system/cpu/cpu*/cpufreq and thus, kpowersave does not show the frequency used and does not allow to chose between ondemand, performance, powersave as it did before. Regards, Didier -- Package-specific info: ** Version: Linux version 2.6.25-2-amd64 (Debian 2.6.25-4) (maks@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Tue May 27 12:45:24 UTC 2008 ** Command line: BOOT_IMAGE=(hd0,1)/vmlinuz-2.6.25-2-amd64 root=/dev/mapper/Tamino-Root ro quiet vga=792 ** Not tainted ** Kernel log: [12840.499674] usb 7-2: new full speed USB device using uhci_hcd and address 24 [12920.661435] CPU0 attaching NULL sched-domain. [12920.661448] CPU1 attaching NULL sched-domain. [12920.680336] CPU0 attaching sched-domain: [12920.680348] domain 0: span 00000003 [12920.680353] groups: 00000001 00000002 [12920.680364] domain 1: span 00000003 [12920.680370] groups: 00000003 [12920.680378] domain 2: span 00000003 [12920.680385] groups: 00000003 [12920.680394] CPU1 attaching sched-domain: [12920.680399] domain 0: span 00000003 [12920.680405] groups: 00000002 00000001 [12920.680415] domain 1: span 00000003 [12920.680421] groups: 00000003 [12920.680428] domain 2: span 00000003 [12920.680434] groups: 00000003 [12840.674052] usb 7-2: configuration #1 chosen from 1 choice [12840.677112] usb 7-2: New USB device found, idVendor=0483, idProduct=2016 [12840.677123] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [12840.677129] usb 7-2: Product: Biometric Coprocessor [12840.677133] usb 7-2: Manufacturer: STMicroelectronics [12840.912834] usb 7-1.2: new full speed USB device using uhci_hcd and address 25 [12841.031017] usb 7-1.2: configuration #1 chosen from 1 choice [12841.034200] usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772 [12841.034210] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [12841.034216] usb 7-1.2: Product: O2Micro CCID SC Reader [12841.034220] usb 7-1.2: Manufacturer: O2 [12844.683098] CPU0 attaching NULL sched-domain. [12844.683111] CPU1 attaching NULL sched-domain. [12844.703771] CPU0 attaching sched-domain: [12844.703783] domain 0: span 00000003 [12844.703788] groups: 00000001 00000002 [12844.703796] domain 1: span 00000003 [12844.703800] groups: 00000003 [12844.703807] CPU1 attaching sched-domain: [12844.703811] domain 0: span 00000003 [12844.703815] groups: 00000002 00000001 [12844.703821] domain 1: span 00000003 [12844.703825] groups: 00000003 [12850.444863] wlan0: no IPv6 routers present [14131.680235] CPU0 attaching NULL sched-domain. [14131.680250] CPU1 attaching NULL sched-domain. [14131.703368] CPU0 attaching sched-domain: [14131.703381] domain 0: span 00000003 [14131.703386] groups: 00000001 00000002 [14131.703396] domain 1: span 00000003 [14131.703402] groups: 00000003 [14131.703412] CPU1 attaching sched-domain: [14131.703417] domain 0: span 00000003 [14131.703423] groups: 00000002 00000001 [14131.703433] domain 1: span 00000003 [14131.703439] groups: 00000003 [14280.205220] hub 4-0:1.0: unable to enumerate USB device on port 2 [14280.445219] usb 5-2: new low speed USB device using uhci_hcd and address 3 [14195.520990] usb 5-2: configuration #1 chosen from 1 choice [14195.561666] input: Logitech USB Receiver as /class/input/input12 [14195.607816] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2 [14195.640787] input: Logitech USB Receiver as /class/input/input13 [14195.710682] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2 [14195.710847] usb 5-2: New USB device found, idVendor=046d, idProduct=c521 [14195.710853] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [14195.710858] usb 5-2: Product: USB Receiver [14195.710862] usb 5-2: Manufacturer: Logitech [14531.170340] CPU0 attaching NULL sched-domain. [14531.170352] CPU1 attaching NULL sched-domain. [14531.202046] CPU0 attaching sched-domain: [14531.202057] domain 0: span 00000003 [14531.202063] groups: 00000001 00000002 [14531.202074] domain 1: span 00000003 [14531.202080] groups: 00000003 [14531.202089] CPU1 attaching sched-domain: [14531.202094] domain 0: span 00000003 [14531.202100] groups: 00000002 00000001 [14531.202111] domain 1: span 00000003 [14531.202117] groups: 00000003 [14449.683509] CPU0 attaching NULL sched-domain. [14449.683523] CPU1 attaching NULL sched-domain. [14449.692406] CPU0 attaching sched-domain: [14449.692418] domain 0: span 00000003 [14449.692423] groups: 00000001 00000002 [14449.692430] domain 1: span 00000003 [14449.692434] groups: 00000003 [14449.692441] CPU1 attaching sched-domain: [14449.692445] domain 0: span 00000003 [14449.692449] groups: 00000002 00000001 [14449.692455] domain 1: span 00000003 [14449.692460] groups: 00000003 [14814.963921] CPU0 attaching NULL sched-domain. [14814.963964] CPU1 attaching NULL sched-domain. [14814.987201] CPU0 attaching sched-domain: [14814.987212] domain 0: span 00000003 [14814.987218] groups: 00000001 00000002 [14814.987225] domain 1: span 00000003 [14814.987229] groups: 00000003 [14814.987236] CPU1 attaching sched-domain: [14814.987240] domain 0: span 00000003 [14814.987244] groups: 00000002 00000001 [14814.987250] domain 1: span 00000003 [14814.987254] groups: 00000003 ** Loaded modules: Module Size Used by cpufreq_ondemand 13712 0 freq_table 9728 1 cpufreq_ondemand usbhid 49632 0 ff_memless 10248 1 usbhid tun 16640 0 appletalk 41744 0 ax25 61596 0 ipx 33232 0 p8023 6656 1 ipx i915 37632 2 drm 99112 3 i915 rfcomm 46112 4 hidp 25216 2 hid 44736 2 usbhid,hidp l2cap 29696 14 rfcomm,hidp ppdev 13832 0 sbs 14336 0 sbshc 11904 1 sbs parport_pc 34344 0 lp 17540 0 parport 44848 3 ppdev,parport_pc,lp container 9600 0 kvm_intel 31552 0 kvm 113368 1 kvm_intel ipv6 294120 10 firewire_sbp2 22808 0 loop 23044 0 snd_hda_intel 414296 5 snd_pcm_oss 46752 0 snd_pcm 88072 3 snd_hda_intel,snd_pcm_oss snd_mixer_oss 21376 1 snd_pcm_oss snd_seq_dummy 8580 0 snd_seq_oss 36736 0 snd_seq_midi 13376 0 snd_rawmidi 31008 1 snd_seq_midi arc4 6528 2 snd_seq_midi_event 12544 2 snd_seq_oss,snd_seq_midi ecb 8192 2 snd_seq 58912 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 29328 3 snd_pcm,snd_seq pcmcia 45080 0 snd_seq_device 12948 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq joydev 17664 0 iwl3945 98036 0 video 27412 0 output 8704 1 video bay 11392 0 snd 66888 17 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device firmware_class 14976 2 pcmcia,iwl3945 yenta_socket 31500 1 rsrc_nonstatic 16128 1 yenta_socket pcmcia_core 46500 3 pcmcia,yenta_socket,rsrc_nonstatic serio_raw 11652 0 i2c_i801 15260 0 mac80211 143116 1 iwl3945 button 13856 0 ac 9344 0 wmi 13120 0 battery 14208 0 soundcore 13088 1 snd intel_agp 34160 1 hci_usb 21148 2 iTCO_wdt 17360 0 psmouse 45724 0 snd_page_alloc 15120 2 snd_hda_intel,snd_pcm cfg80211 25360 1 mac80211 bluetooth 65444 8 rfcomm,hidp,l2cap,hci_usb dcdbas 13616 0 evdev 17408 9 ext3 139280 6 jbd 55336 1 ext3 mbcache 13956 1 ext3 sha256_generic 13952 0 aes_x86_64 12928 3 aes_generic 32424 1 aes_x86_64 cbc 8960 1 dm_crypt 20488 1 crypto_blkcipher 24324 4 ecb,cbc,dm_crypt dm_mirror 31748 0 dm_snapshot 22472 0 dm_mod 68536 18 dm_crypt,dm_mirror,dm_snapshot ide_cd_mod 41504 0 cdrom 39464 1 ide_cd_mod piix 12808 0 [permanent] ide_pci_generic 9476 0 [permanent] ide_core 138160 3 ide_cd_mod,piix,ide_pci_generic sd_mod 33728 3 firewire_ohci 27908 0 firewire_core 45920 2 firewire_sbp2,firewire_ohci crc_itu_t 6656 1 firewire_core ahci 36616 2 ata_generic 13572 0 libata 165808 2 ahci,ata_generic scsi_mod 170360 3 firewire_sbp2,sd_mod,libata tg3 102532 0 ehci_hcd 40076 0 uhci_hcd 29472 0 dock 16288 2 bay,libata thermal 26656 1 processor 49388 3 thermal fan 10760 1 intelfb 42280 0 i2c_algo_bit 11012 1 intelfb i2c_core 30752 3 i2c_i801,intelfb,i2c_algo_bit ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) Subsystem: Dell Device [1028:01f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at eff8 [size=8] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f20 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20) Subsystem: Dell Device [1028:01f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 Memory behind bridge: fe800000-fe8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 Memory behind bridge: fe700000-fe7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f80 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f60 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 6f40 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20) Subsystem: Dell Device [1028:01f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=07, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: fe600000-fe6fffff Prefetchable memory behind bridge: 0000000088000000-000000008bffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 6fa0 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: ata_generic, piix, ide-pci-generic 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 1276 Region 0: I/O ports at 6eb0 [size=8] Region 1: I/O ports at 6eb8 [size=4] Region 2: I/O ports at 6ec0 [size=8] Region 3: I/O ports at 6ec8 [size=4] Region 4: I/O ports at 6ee0 [size=32] Region 5: Memory at fe9fb800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe9fb700 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 19 Region 0: Memory at fe600000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: 88000000-8bfff000 (prefetchable) Memory window 1: 8c000000-8ffff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10) Subsystem: Dell Device [1028:01f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at fe6fe800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02) Subsystem: Dell Device [1028:01f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1275 Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1021] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1274 Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 Kernel modules: iwl3945 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (700, 'testing'), (700, 'stable'), (600, 'unstable'), (50, 'experimental'), (50, 'unstable'), (50, 'testing'), (50, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.25-2-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_CH.UTF-8, LC_CTYPE=fr_CH.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.25-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.25-2-amd64 recommends no packages. -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.25-2-amd64/preinst/abort-overwrite-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/prerm/removing-running-kernel-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/postinst/old-initrd-link-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/postinst/create-kimage-link-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/preinst/failed-to-move-modules-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/preinst/abort-install-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/postinst/kimage-is-a-directory: linux-image-2.6.25-2-amd64/postinst/depmod-error-2.6.25-2-amd64: false linux-image-2.6.25-2-amd64/postinst/bootloader-test-error-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/postinst/old-system-map-link-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/prerm/would-invalidate-boot-loader-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/preinst/overwriting-modules-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/postinst/depmod-error-initrd-2.6.25-2-amd64: false linux-image-2.6.25-2-amd64/postinst/old-dir-initrd-link-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/preinst/elilo-initrd-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/postinst/bootloader-error-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/preinst/lilo-initrd-2.6.25-2-amd64: true linux-image-2.6.25-2-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.25-2-amd64/preinst/initrd-2.6.25-2-amd64: linux-image-2.6.25-2-amd64/preinst/bootloader-initrd-2.6.25-2-amd64: true
--- End Message ---
--- Begin Message ---
- To: maximilian attems <max@stro.at>
- Cc: 483375-done@bugs.debian.org
- Subject: Re: Bug#483375: linux-image-2.6.25-2-amd64: 2.6.25-4 broke cpu frequency scaling
- From: Didier Raboud <didier@raboud.com>
- Date: Tue, 3 Jun 2008 10:01:53 +0200
- Message-id: <200806031001.56277.didier@raboud.com>
- In-reply-to: <[🔎] 20080603065312.GT29466@stro.at>
- References: <20080528142339.24425.70831.reportbug@Tamino> <[🔎] 20080603065312.GT29466@stro.at>
Le mardi 3 juin 2008 08:53:12 maximilian attems, vous avez écrit : > can't reproduce your statement. > > have for example > cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq > 800000 Hi, Trying to get comparative info, I rebooted under 2.6.24-1 and saw that I could reproduce the bug even under 2.6.24-1... And I checked my packages: I had removed (for obscure reasons) cpufrequtils. I'm therewith closing the bug as it was no bug but a user error. Best regards, DidierAttachment: signature.asc
Description: This is a digitally signed message part.
--- End Message ---