[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#472576: marked as done (linux-image-2.6.24-1-amd64: clocksource trouble doesn't allow cpu frequency changes)



Your message dated Mon, 2 Jun 2008 15:32:17 +0200
with message-id <20080602133217.GM29466@stro.at>
and subject line Re: linux-image-2.6.24-1-amd64: clocksource trouble doesn't allow cpu frequency changes
has caused the Debian Bug report #472576,
regarding linux-image-2.6.24-1-amd64: clocksource trouble doesn't allow cpu frequency changes
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
472576: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=472576
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.24-1-amd64
Version: 2.6.24-4
Severity: normal

- sorry forgot to set my email


-- Package-specific info:
** Version:
Linux version 2.6.24-1-amd64 (Debian 2.6.24-4) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Mon Feb 11 13:47:43 UTC 2008

** Command line:
root=/dev/sda5 ro apic=debug nmi_watchdog=2

** Tainted: P M (17)

** Kernel log:
mmc0: SDHCI at 0xf8406800 irq 22 DMA
input: PS/2 Mouse as /class/input/input7
ACPI: Battery Slot [BAT1] (battery present)
input: Video Bus as /class/input/input8
input: AlpsPS/2 ALPS GlidePoint as /class/input/input9
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
si3054: cannot initialize. EXT MID = 0000
ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
ndiswrapper (link_pe_images:576): fixing KI_USER_SHARED_DATA address in the driver
ndiswrapper: driver net5211 (,06/21/2007,5.3.0.56) loaded
ACPI: PCI Interrupt 0000:14:00.0[A] -> GSI 19 (level, low) -> IRQ 19
ndiswrapper (ZwClose:2227): closing handle 0x0 not implemented
PCI: Setting latency timer of device 0000:14:00.0 to 64
ndiswrapper: using IRQ 19
wlan0: ethernet device 00:1b:9e:4b:03:47 using serialized NDIS driver: net5211, version: 0x50003, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:001C.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new interface driver ndiswrapper
loop: module loaded
fuse init (API version 7.9)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1950828k swap on /dev/mapper/sda6_crypt.  Priority:-1 extents:1 across:1950828k
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
Clocksource tsc unstable (delta = -149044602 ns)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: NMI watchdog either active or at least initialized. Please disable the NMI
vboxdrv: watchdog by specifying 'nmi_watchdog=0' at kernel command line.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xef
[fglrx] Maximum main memory to use for locked dma buffers: 1766 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 18
vbox0: no IPv6 routers present
[fglrx] GART Table is not in FRAME_BUFFER range 
[fglrx] Reserve Block - 0 offset =  0X7ffb000 length = 0X5000
[fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
Time: acpi_pm clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
 lapic is not functional.
Could not switch to high resolution mode on CPU 0
Time: hpet clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
 lapic is not functional.
Could not switch to high resolution mode on CPU 0
Time: tsc clocksource has been installed.
ndiswrapper: device wlan0 removed
ACPI: PCI interrupt for device 0000:14:00.0 disabled
usbcore: deregistering interface driver ndiswrapper
ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
ndiswrapper (link_pe_images:576): fixing KI_USER_SHARED_DATA address in the driver
ndiswrapper: driver net5211 (,06/21/2007,5.3.0.56) loaded
ACPI: PCI Interrupt 0000:14:00.0[A] -> GSI 19 (level, low) -> IRQ 19
ndiswrapper (ZwClose:2227): closing handle 0x0 not implemented
PCI: Setting latency timer of device 0000:14:00.0 to 64
ndiswrapper: using IRQ 19
wlan0: ethernet device 00:1b:9e:4b:03:47 using serialized NDIS driver: net5211, version: 0x50003, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:001C.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new interface driver ndiswrapper
wlan0: no IPv6 routers present
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xef
hda-intel: Invalid position buffer, using LPIB read method instead.
APIC error on CPU1: 00(40)
APIC error on CPU0: 00(40)
Time: acpi_pm clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
 lapic is not functional.
Could not switch to high resolution mode on CPU 0
APIC error on CPU0: 40(40)
APIC error on CPU1: 40(40)
APIC error on CPU1: 40(40)
APIC error on CPU0: 40(40)

** Loaded modules:
Module                  Size  Used by
ndiswrapper           226688  0 
fglrx                1804800  20 
rfcomm                 46240  2 
l2cap                  29568  9 rfcomm
bluetooth              65540  4 rfcomm,l2cap
tun                    16512  0 
ppdev                  13832  0 
parport_pc             42408  0 
lp                     17476  0 
parport                44812  3 ppdev,parport_pc,lp
ipv6                  286248  16 
powernow_k8            18464  1 
cpufreq_userspace       9604  0 
cpufreq_stats          10528  0 
cpufreq_powersave       6272  0 
cpufreq_ondemand       13712  1 
freq_table              9728  3 powernow_k8,cpufreq_stats,cpufreq_ondemand
ext3                  139024  1 
jbd                    55976  1 ext3
mbcache                13952  1 ext3
fuse                   53680  1 
cpufreq_conservative    13320  0 
firewire_sbp2          20624  0 
loop                   22788  0 
snd_hda_intel         362024  4 
snd_pcm_oss            46624  0 
snd_pcm                89352  3 snd_hda_intel,snd_pcm_oss
snd_mixer_oss          21376  1 snd_pcm_oss
snd_seq_dummy           8580  0 
joydev                 17536  0 
snd_seq_oss            36736  0 
snd_seq_midi           13376  0 
snd_rawmidi            30624  1 snd_seq_midi
snd_seq_midi_event     12544  2 snd_seq_oss,snd_seq_midi
pcmcia                 45720  0 
firmware_class         15104  1 pcmcia
snd_seq                58752  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              28552  3 snd_pcm,snd_seq
snd_seq_device         12948  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
sdhci                  23172  0 
snd                    65896  15 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
battery                19976  0 
tifm_7xx1              12672  0 
video                  25620  0 
output                  8704  1 video
ac                     11400  0 
soundcore              13216  1 snd
tifm_core              16008  1 tifm_7xx1
yenta_socket           31756  1 
rsrc_nonstatic         16128  1 yenta_socket
pcmcia_core            46500  3 pcmcia,yenta_socket,rsrc_nonstatic
mmc_core               58760  1 sdhci
shpchp                 38428  0 
i2c_piix4              13708  0 
snd_page_alloc         15248  2 snd_hda_intel,snd_pcm
button                 13984  0 
psmouse                45724  0 
pci_hotplug            35504  1 shpchp
i2c_core               29824  1 i2c_piix4
k8temp                 10496  0 
serio_raw              11908  0 
evdev                  17024  7 
pcspkr                  7808  0 
jfs                   169296  3 
sha256_generic         13312  0 
aes_generic            31040  0 
aes_x86_64             29992  4 
cbc                     9088  2 
blkcipher              11780  1 cbc
dm_crypt               18568  1 
dm_mod                 67832  5 dm_crypt
ide_cd                 44704  0 
cdrom                  39464  1 ide_cd
generic                 9732  0 [permanent]
sd_mod                 33408  6 
atiixp                  9488  0 [permanent]
ide_core              144920  3 ide_cd,generic,atiixp
firewire_ohci          24192  0 
firewire_core          49472  2 firewire_sbp2,firewire_ohci
crc_itu_t               6656  1 firewire_core
ehci_hcd               39692  0 
ata_generic            13060  0 
ahci                   34436  5 
libata                162736  2 ata_generic,ahci
scsi_mod              170296  3 firewire_sbp2,sd_mod,libata
ohci_hcd               28164  0 
r8169                  36740  0 
thermal                22688  0 
processor              45032  2 powernow_k8,thermal
fan                     9864  0 

** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 64

00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: f8000000-f81fffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=08, subordinate=0d, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: f8300000-f83fffff
	Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
	Memory behind bridge: f8200000-f82fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at 8440 [size=8]
	Region 1: I/O ports at 8434 [size=4]
	Region 2: I/O ports at 8438 [size=8]
	Region 3: I/O ports at 8430 [size=4]
	Region 4: I/O ports at 8400 [size=16]
	Region 5: Memory at f8709000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f8704000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at f8705000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f8706000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at f8707000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f8708000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at f8709400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: I/O ports at 8410 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c-piix4

00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 8420 [size=16]
	Kernel driver in use: ATIIXP_IDE
	Kernel modules: ata_generic, atiixp, generic

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383]
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff08]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin ? routed to IRQ 16
	Region 0: Memory at f8700000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=1a, subordinate=1e, sec-latency=64
	Memory behind bridge: f8400000-f84fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp
	Kernel modules: k8temp

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] (prog-if 00 [VGA controller])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M]
	Region 2: Memory at f8100000 (64-bit, non-prefetchable) [size=64K]
	Region 4: I/O ports at 9000 [size=256]
	Region 5: Memory at f8000000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: fglrx_pci
	Kernel modules: fglrx

0e:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 1276
	Region 0: I/O ports at a000 [size=256]
	Region 2: Memory at f8300000 (64-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 88000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

14:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
	Subsystem: Askey Computer Corp. Unknown device [144f:7128]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at f8200000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ndiswrapper
	Kernel modules: ath5k

1a:04.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at f8404000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=1a, secondary=1b, subordinate=1e, sec-latency=176
	Memory window 0: 8c000000-8ffff000 (prefetchable)
	Memory window 1: 90000000-93fff000
	I/O window 0: 00001400-000014ff
	I/O window 1: 00001800-000018ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

1a:04.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at f8406000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at f8400000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire-ohci

1a:04.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at f8405000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: tifm_7xx1
	Kernel modules: tifm_7xx1

1a:04.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01)
	Subsystem: Toshiba America Info Systems Unknown device [1179:ff00]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at f8406800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci
	Kernel modules: sdhci



-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.24-1-amd64 depends on:
ii  debconf [debconf-2.0]        1.5.20      Debian configuration management sy
ii  initramfs-tools [linux-initr 0.91e       tools for generating an initramfs
ii  module-init-tools            3.3-pre11-4 tools for managing Linux kernel mo

linux-image-2.6.24-1-amd64 recommends no packages.

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64: false
  linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk:
  linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory:
  linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false



--- End Message ---
--- Begin Message ---
Version: 2.6.25-1

this should be fixed in 2.6.25 (unstable images install just fine in
testing) if not please holler loudly.

thanks for the feedback.

-- 
maks


--- End Message ---

Reply to: