--- Begin Message ---
Package: linux-image-2.6.24-1-powerpc64
Version: 2.6.24-7
Severity: normal
Please enable GEN_RTC on PPC/PPC64 kernels. Otherwise I can't reliably save the clock in the system RTC.
Thank you
--
With best wishes
Dmitry
-- Package-specific info:
** Version:
Linux version 2.6.24-1-powerpc64 (Debian 2.6.24-7) (dannf@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Sat May 10 20:57:22 UTC 2008
** Command line:
root=/dev/sda3 ro console=ttyPZ0,57600n1
** Tainted: P (1)
** Kernel log:
windfarm_smu_sat: Unknown symbol wf_register_sensor
windfarm_smu_sensors: Unknown symbol wf_register_sensor
windfarm_smu_sensors: Unknown symbol wf_put_sensor
windfarm_smu_sensors: Unknown symbol wf_unregister_sensor
windfarm_smu_sensors: Unknown symbol wf_get_sensor
usb 1-1.3: configuration #1 chosen from 1 choice
PCI: Enabling device: (0001:02:0b.2), cmd 6
ehci_hcd 0001:02:0b.2: EHCI Host Controller
ehci_hcd 0001:02:0b.2: new USB bus registered, assigned bus number 3
ehci_hcd 0001:02:0b.2: irq 63, io mem 0x80100000
ehci_hcd 0001:02:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
usbcore: registered new interface driver hiddev
tg3.c:v3.86 (November 9, 2007)
SCSI subsystem initialized
eth0: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0d:93:9e:06:ce
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
libata version 3.00 loaded.
eth1: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0d:93:9e:06:cf
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
PCI: Enabling device: (0001:03:0e.0), cmd 2
firewire_ohci: Added fw-ohci device 0001:03:0e.0, OHCI version 1.0
sata_svw 0001:05:0c.0: version 2.3
scsi0 : sata_svw
usb 1-1: USB disconnect, address 2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usb 1-1.3: USB disconnect, address 3
scsi1 : sata_svw
scsi2 : sata_svw
scsi3 : sata_svw
ata1: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600000 irq 17
ata2: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600100 irq 17
ata3: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600200 irq 17
ata4: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600300 irq 17
usb 1-1: new full speed USB device using ohci_hcd and address 4
firewire_core: created new fw device fw0 (0 config rom retries, S800)
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6: Hitachi HDS722580VLSA80, V32BC6EA, max UDMA/100
ata1.00: 160836480 sectors, multi 16: LBA48
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
ata1.00: configured for UDMA/100
hub 1-1:1.0: 3 ports detected
ata2: SATA link down (SStatus 4 SControl 300)
usb 1-1.3: new full speed USB device using ohci_hcd and address 5
usb 1-1.3: configuration #1 chosen from 1 choice
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input2
input,hidraw0: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.0-1.3
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input3
input,hidraw1: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.0-1.3
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72258 V32B PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: [mac] sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: [sda] Attached SCSI disk
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102
agpgart: Detected Apple U3H chipset
agpgart: configuring for size idx: 8
agpgart: AGP aperture is 32M @ 0x0
Adding 1774200k swap on /dev/sda5. Priority:-1 extents:1 across:1774200k
EXT3-fs warning: checktime reached, running e2fsck is recommended
EXT3 FS on sda3, internal journal
loop: module loaded
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda4
Ending clean XFS mount for filesystem: sda4
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ioctl32(pbbuttonsd:1940): Unknown cmd fd(8) cmd(40044201){t:'B';sz:4} arg(ffdb98a8) on /dev/pmu
eth0: no IPv6 routers present
rtas_flash: no firmware flash support
scan-log-dump not implemented on this system
Generic RTC Driver v1.07
rtc_cmos_setup: module license 'unspecified' taints kernel.
rtc_cmos_setup: Unknown symbol of_address_to_resource
rtc_cmos_setup: Unknown symbol platform_device_register_simple
Generic RTC Driver v1.07
** Loaded modules:
Module Size Used by
genrtc 10964 0
hvcserver 9464 0
rtas_flash 19648 0
rtc_ds1307 13120 0
rtc_core 35852 1 rtc_ds1307
rtc_lib 8600 2 rtc_ds1307,rtc_core
ipv6 414904 14
xfs 752368 1
loop 31564 0
firewire_sbp2 27208 0
snd_aoa_i2sbus 37340 0
snd_aoa_soundbus 14876 1 snd_aoa_i2sbus
snd_pcm 135548 1 snd_aoa_i2sbus
snd_page_alloc 19648 1 snd_pcm
snd_timer 40904 1 snd_pcm
snd 99680 3 snd_aoa_i2sbus,snd_pcm,snd_timer
soundcore 16240 1 snd
uninorth_agp 19464 1
agpgart 57292 1 uninorth_agp
evdev 23680 0
ext3 201272 1
jbd 83880 1 ext3
mbcache 18164 1 ext3
sd_mod 43112 4
sata_svw 18204 3
ata_generic 14380 0
libata 213408 2 sata_svw,ata_generic
scsi_mod 233776 3 firewire_sbp2,sd_mod,libata
usbhid 67440 0
hid 55608 1 usbhid
ff_memless 12872 1 usbhid
firewire_ohci 37520 0
firewire_core 71100 2 firewire_sbp2,firewire_ohci
crc_itu_t 6832 1 firewire_core
tg3 146876 0
generic 10484 0 [permanent]
ehci_hcd 58460 0
windfarm_pid 8432 0
therm_pm72 40060 0
i2c_powermac 12432 0
** PCI devices:
0000:f0:0b.0 Host bridge [0600]: Apple Computer Inc. U3H AGP Bridge [106b:0059]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
Kernel modules: uninorth-agp
0001:00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Memory behind bridge: 90000000-900fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:03.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0045]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: 80000000-800fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:04.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0046]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: 80100000-801fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:05.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0047]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: 80200000-802fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:06.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0048]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Memory behind bridge: 80300000-805fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:07.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0049]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: 80600000-806fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:01:07.0 Class [ff00]: Apple Computer Inc. K2 KeyLargo Mac/IO [106b:0041] (rev 60)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 64 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:02:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
Subsystem: NEC Corporation USB [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at 80102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:02:0b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
Subsystem: NEC Corporation USB [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 63
Region 0: Memory at 80101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:02:0b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20)
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 63
Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
0001:03:0d.0 Class [ff00]: Apple Computer Inc. K2 ATA/100 [106b:0043]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at 80204000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: ide-pmac
0001:03:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. K2 FireWire [106b:0042] (prog-if 10)
Subsystem: Apple Computer Inc. Device [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at 80200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
0001:05:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Broadcom K2 SATA [1166:0240]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin ? routed to IRQ 17
Region 0: I/O ports at <unassigned> [disabled]
Region 1: I/O ports at <unassigned> [disabled]
Region 2: I/O ports at <unassigned> [disabled]
Region 3: I/O ports at <unassigned> [disabled]
Region 4: I/O ports at <unassigned> [disabled]
Region 5: Memory at 80600000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: sata_svw
Kernel modules: sata_svw
0001:07:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 03)
Subsystem: Apple Computer Inc. Device [106b:005a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 54
Region 0: Memory at 90030000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at 90020000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
0001:07:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 03)
Subsystem: Apple Computer Inc. Device [106b:005a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 57
Region 0: Memory at 90010000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at 90000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: powerpc (ppc64)
Kernel: Linux 2.6.24-1-powerpc64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-powerpc64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.24-1-powerpc64 recommends no packages.
-- debconf information:
linux-image-2.6.24-1-powerpc64/postinst/old-system-map-link-2.6.24-1-powerpc64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-powerpc64/preinst/lilo-initrd-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/postinst/old-dir-initrd-link-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/preinst/abort-overwrite-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/postinst/bootloader-error-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-powerpc64/preinst/failed-to-move-modules-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/preinst/bootloader-initrd-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-powerpc64/preinst/elilo-initrd-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/preinst/overwriting-modules-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/postinst/create-kimage-link-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/postinst/depmod-error-initrd-2.6.24-1-powerpc64: false
linux-image-2.6.24-1-powerpc64/preinst/initrd-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/preinst/abort-install-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/prerm/removing-running-kernel-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/prerm/would-invalidate-boot-loader-2.6.24-1-powerpc64: true
linux-image-2.6.24-1-powerpc64/postinst/depmod-error-2.6.24-1-powerpc64: false
linux-image-2.6.24-1-powerpc64/postinst/bootloader-test-error-2.6.24-1-powerpc64:
linux-image-2.6.24-1-powerpc64/postinst/old-initrd-link-2.6.24-1-powerpc64: true
--- End Message ---