--- Begin Message ---
Package: linux-image-2.6.18-1-powerpc
Version: 2.6.18-3
Sound on my Mac Mini broke after upgrading from
linux-image-2.6.17-2-powerpc (2.6.17-9) to the current 2.6.18
version. It looks like the sound driver changed upstream from
snd_powermac to snd_aoa.
Testing with tyrquake, after failing fopen("/dev/dsp", O_RDRW), perror
returns "No such device". Works fine with 2.6.17.
dmesg and lspci output attached.
Using PowerMac machine description
Total memory = 512MB; using 1024kB for hash table (at cff00000)
Linux version 2.6.18-1-powerpc (Debian 2.6.18-3) (waldi@debian.org) (gcc version 4.1.2 20061007 (prerelease) (Debian 4.1.1-16)) #1 Sat Oct 21 16:15:47 CEST 2006
Found initrd at 0xc1900000:0xc1e1e000
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
Mapped at 0xfdfc0000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
Processor NAP mode on idle enabled.
PowerMac motherboard: Mac mini
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 55
nvram: Checking bank 0...
nvram: gen0=178, gen1=177
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Top of RAM: 0x20000000, Total RAM: 0x20000000
Memory hole size: 0MB
On node 0 totalpages: 131072
DMA zone: 131072 pages, LIFO batch:31
Built 1 zonelists. Total pages: 131072
Kernel command line: root=/dev/hda5 ro
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 41.620907 MHz
time_init: processor frequency = 1249.999995 MHz
Console: colour dummy device 80x25
serial8250_console_init: nothing to do on PowerMac
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
High memory: 0k
Memory: 509440k/524288k available (2916k kernel code, 14344k reserved, 268k data, 197k bss, 180k init)
Calibrating delay loop... 83.20 BogoMIPS (lpj=166400)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
checking if image is initramfs... it is
Freeing initrd memory: 5240k freed
NET: Registered protocol family 16
KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
channel 0 bus <multibus>
PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
channel 1 bus <multibus>
channel 2 bus <multibus>
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 0 of device 0001:10:18.0
PCI: Cannot allocate resource region 0 of device 0001:10:19.0
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 65536 bind 32768)
TCP reno registered
Thermal assist unit not available
audit: initializing netlink socket (disabled)
audit(1162202586.735:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Enabling device 0000:00:10.0 (0006 -> 0007)
radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
radeonfb: Retrieved PLL infos from Open Firmware
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=250.00 MHz
radeonfb: PLL min 12000 max 35000
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type CRT found
radeonfb: EDID probed
Console: switching to colour frame buffer device 128x48
radeonfb (0000:00:10.0): ATI Radeon Yb
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
serial8250_init: nothing to do on PowerMac
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
MacIO PCI driver attached to Intrepid chipset
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
adb: starting probe task...
adb: finished probe task...
PCI: Enabling device 0002:20:0d.0 (0000 -> 0002)
ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
Probing IDE interface ide0...
hda: ST940110A, ATA DISK drive
hdb: MATSHITACD-RW CW-8124, ATAPI CD/DVD-ROM drive
hda: Enabling Ultra DMA 5
hdb: Enabling Ultra DMA 2
ide0 at 0xe1022000-0xe1022007,0xe1022160 on irq 39
ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24
Probing IDE interface ide1...
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
input: PMU as /class/input/input1
Freeing unused kernel memory: 180k init
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus uni-n 1 registered
PowerMac i2c bus uni-n 0 registered
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
ieee1394: Initialized config rom entry `ip1394'
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PHY ID: 4061e4, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:7b:f4:00
eth0: Found BCM5221 PHY
PCI: Enabling device 0002:20:0e.0 (0000 -> 0002)
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
hda: max request size: 512KiB
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
ohci_hcd 0001:10:1a.0: OHCI Host Controller
ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda:PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
ohci_hcd 0001:10:1b.0: OHCI Host Controller
ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
[mac] hda1 hda2 hda3 hda4 hda5 hda6
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
ohci_hcd 0001:10:1b.1: OHCI Host Controller
ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3
ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Enabling device 0001:10:1b.2 (0004 -> 0006)
ehci_hcd 0001:10:1b.2: EHCI Host Controller
ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4
ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0001:10:1b.0: wakeup
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe7bf400]
usb 2-1: new full speed USB device using ohci_hcd and address 3
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-1.1: new low speed USB device using ohci_hcd and address 4
usb 2-1.1: configuration #1 chosen from 1 choice
eth0: Link is up at 100 Mbps, half-duplex.
usb 2-1.4: new low speed USB device using ohci_hcd and address 5
usb 2-1.4: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: HID 1267:0103 as /class/input/input2
input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0001:10:1b.0-1.1
drivers/usb/input/hid-core.c: ctrl urb status -110 received
input: HID 1267:0103 as /class/input/input3
input: USB HID v1.10 Device [HID 1267:0103] on usb-0001:10:1b.0-1.1
input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0001:10:1b.0-1.4
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected Apple UniNorth 2 chipset
agpgart: configuring for size idx: 4
agpgart: AGP aperture is 16M @ 0x0
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ts: Compaq touchscreen protocol output
snd-aoa-fabric-layout: found bus with layout 58
snd-aoa-fabric-layout: Using direct GPIOs
snd-aoa-fabric-layout: can use this codec
Adding 1953116k swap on /dev/hda4. Priority:-1 extents:1 across:1953116k
EXT3 FS on hda5, internal journal
apm_emu: APM Emulation 0.5 initialized.
loop: loaded (max 8 devices)
SCSI subsystem initialized
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
eth0: Link is up at 100 Mbps, half-duplex.
eth0: Pause is disabled
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.1 20051102
[drm] Initialized radeon 1.25.0 20060524 on minor 0
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] Can't use AGP base @0x00000000, won't fit
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
eth0: no IPv6 routers present
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43)
0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43)
0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
0002:20:0d.0 Class ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81)
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)
--- End Message ---