--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: same problem as bug #358744 (ethernet and mouse does not work)
- From: "Daniel Schwedel" <dan.sch@gmx.de>
- Date: Wed, 12 Apr 2006 19:46:42 +0200 (MEST)
- Message-id: <29876.1144864002@www067.gmx.net>
Package: linux-image-2.6.16-1-686
Version: 2.6.16-1
Severity: normal
Hello, I don't know if this is the correct place for my problem, but I just
try it. I have a problem with my buildin ethernet (r8169) on a Benq Joybook
S72 laptop. I saw that someone else had the nearly the same problem (bug
#358744).
My usb-mouse behaved jumpy (unuseable) and the eth0 don't work. So I
installed a kernel source image, configured it and had the same problem.
This problem solves, if I use the bootoption "irqpoll", then everything is
working normal.
I saw that I get cryptic messages on start up about the yenta/pcmcia, so I
disabled it in my own kernel config, but it chanced nothing, only irqpoll
helped. This is a part from dmesg, without the irqpoll option:
...
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01402000)
...
irq 11: nobody cared (try booting with the "irqpoll" option)
[<c013f5a4>] __report_bad_irq+0x24/0x90
[<c013f6a3>] note_interrupt+0x93/0x280
[<c013eeed>] handle_IRQ_event+0x3d/0x70
[<c013eff0>] __do_IRQ+0xd0/0x100
[<c0105609>] do_IRQ+0x19/0x30
[<c01039ae>] common_interrupt+0x1a/0x20
[<c013eec8>] handle_IRQ_event+0x18/0x70
[<c013ef96>] __do_IRQ+0x76/0x100
[<c0105609>] do_IRQ+0x19/0x30
[<c01039ae>] common_interrupt+0x1a/0x20
[<e08d1300>] set_phy_reg+0x60/0xc0 [ohci1394]
[<c015c6ed>] kmem_freepages+0x7d/0xa0
[<e08d1898>] ohci_devctl+0x468/0x6b0 [ohci1394]
[<e08e6c6b>] csr1212_generate_csr_image+0x1db/0x4b0 [ieee1394]
[<e08db0aa>] hpsb_reset_bus+0x3a/0x40 [ieee1394]
[<e08dd907>] delayed_reset_bus+0xa7/0xf0 [ieee1394]
[<c012f0ec>] run_workqueue+0x9c/0x140
[<e08dd860>] delayed_reset_bus+0x0/0xf0 [ieee1394]
[<c012f381>] worker_thread+0x111/0x150
[<c011a8f0>] default_wake_function+0x0/0x20
[<c013288a>] kthread+0xea/0xf0
[<c012f270>] worker_thread+0x0/0x150
[<c01327a0>] kthread+0x0/0xf0
[<c0101005>] kernel_thread_helper+0x5/0x10
handlers:
[<e0862f60>] (usb_hcd_irq+0x0/0x70 [usbcore])
[<e0862f60>] (usb_hcd_irq+0x0/0x70 [usbcore])
[<e0862f60>] (usb_hcd_irq+0x0/0x70 [usbcore])
[<e0862f60>] (usb_hcd_irq+0x0/0x70 [usbcore])
[<e0857430>] (yenta_interrupt+0x0/0xd0 [yenta_socket])
Disabling IRQ #11
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00a0d15555555555]
Adding 1124508k swap on /dev/hda5. Priority:-1 extents:1 across:1124508k
hw_random: cannot enable RNG, aborting
... more dmesg: everything I found that uses the IRQ 11
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) may be hidden behind transparent bridge #06 (-#06) (try
'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *7)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
ACPI: Power Resource [PUT2] (on)
ACPI: Power Resource [PFA1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Bridge: 0000:00:01.0
IO window: c000-dfff
MEM window: c0000000-cfffffff
PREFETCH window: 90000000-9fffffff
PCI: Bus 7, cardbus bridge: 0000:06:09.0
IO window: 00002400-000024ff
IO window: 00002800-000028ff
PREFETCH window: 80000000-81ffffff
MEM window: b2000000-b3ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-3fff
MEM window: b0000000-bfffffff
PREFETCH window: 80000000-8fffffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
...
Has it something to do with a broken DSDTable? Do I have a chance to get a
normal working system, or have I written only rubbish?
Thanks so far Greetings dan.
I'm using debian/ unstable, and yes I'm using the fglrx-drivers but a
prebuild deb package from
http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html , not
the one from ATI. If you like more information or the complete dmesg just
mail me, and tell me how to gather them.
--
Analog-/ISDN-Nutzer sparen mit GMX SmartSurfer bis zu 70%!
Kostenlos downloaden: http://www.gmx.net/de/go/smartsurfer
--- End Message ---