Bug#478765: marked as done (BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1389])
Your message dated Sun, 25 May 2008 10:17:50 +0200
with message-id <20080525081750.GL27599@baikonur.stro.at>
and subject line Re: Bug#478765: BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1389]
has caused the Debian Bug report #478765,
regarding BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1389]
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
478765: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=478765
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1389]
- From: Fabrice Lorrain <Fabrice.Lorrain@free.fr>
- Date: Wed, 30 Apr 2008 23:01:57 +0200
- Message-id: <20080430210157.16423.15577.reportbug@arkham.sweet-home.fr>
Package: linux-image-2.6.24-1-686
Version: 2.6.24-6
Severity: normal
Hello,
I observe from time to time the following at cold or warm reboot on a
mac-mini (core 2 duo, cf. http://www.apple.com/macmini/specs.html).
I don't think the trouble is with the hardware (same box working fine
with OSX and Xubuntu-hardy in live mode)
Maybe related to #478278 and #464387.
I didn't see those pbs with 2.6.18-5-686 and -2.6.22-3-686.
Upgrading to linux-image-2.6.25-1-686 as suggested in #464387.
@+,
Fab
hda: PIONEER DVD-RW DVR-K06, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
hda: set_drive_speed_status: status=0xd0 { Busy }
hda: UDMA/33 mode selected
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1389]
Pid: 1389, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f89e6dfb>] EFLAGS: 00000212 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 000001f7
ESI: f89f9f78 EDI: f89f9f20 EBP: fffef992 ESP: f7673d68
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: f8c120e4 CR3: 3770c000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f89e7262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f89e7a4f>] ide_config_drive_speed+0xef/0x2ba [ide_core]
[<f89e86fe>] ide_set_dma_mode+0x42/0x55 [ide_core]
[<f89ec5d7>] ide_set_dma+0xe4/0x11a [ide_core]
[<f89e9717>] probe_hwif+0x62b/0x690 [ide_core]
[<f89e9fda>] ide_device_add+0x2e/0x9c [ide_core]
[<c011d47e>] __wake_up_common+0x32/0x5c
[<f89ebc9e>] ide_setup_pci_device+0x38/0x42 [ide_core]
[<c01eb7c7>] pci_device_probe+0x36/0x57
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
[<c0240dfa>] bus_for_each_dev+0x37/0x59
[<c0241687>] driver_attach+0x16/0x18
[<c0241930>] __driver_attach+0x0/0x79
[<c02410e0>] bus_add_driver+0x6d/0x197
[<c01eb904>] __pci_register_driver+0x48/0x74
[<f8ac009c>] piix_ide_init+0x9c/0xa0 [piix]
[<c0138ef2>] blocking_notifier_call_chain+0x17/0x1a
[<c0143721>] sys_init_module+0x15db/0x16f3
[<c016406e>] vma_prio_tree_insert+0x17/0x2a
[<f897b000>] alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[<c01e6c92>] pci_bus_read_config_byte+0x0/0x61
[<c0103e5e>] sysenter_past_esp+0x6b/0xa1
=======================
hda: set_drive_speed_status: status=0xd0 { Busy }
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1389]
Pid: 1389, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f89e6dfb>] EFLAGS: 00000202 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 000001f7
ESI: f89f9f78 EDI: f89f9f20 EBP: ffff0357 ESP: f7673d68
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: f8c120e4 CR3: 3770c000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f89e7262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f89e7a4f>] ide_config_drive_speed+0xef/0x2ba [ide_core]
[<f89e8769>] ide_set_pio_mode+0x58/0x6e [ide_core]
[<f89ec5f0>] ide_set_dma+0xfd/0x11a [ide_core]
[<f89e9717>] probe_hwif+0x62b/0x690 [ide_core]
[<f89e9fda>] ide_device_add+0x2e/0x9c [ide_core]
[<c011d47e>] __wake_up_common+0x32/0x5c
[<f89ebc9e>] ide_setup_pci_device+0x38/0x42 [ide_core]
[<c01eb7c7>] pci_device_probe+0x36/0x57
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
[<c0240dfa>] bus_for_each_dev+0x37/0x59
[<c0241687>] driver_attach+0x16/0x18
[<c0241930>] __driver_attach+0x0/0x79
[<c02410e0>] bus_add_driver+0x6d/0x197
[<c01eb904>] __pci_register_driver+0x48/0x74
[<f8ac009c>] piix_ide_init+0x9c/0xa0 [piix]
[<c0138ef2>] blocking_notifier_call_chain+0x17/0x1a
[<c0143721>] sys_init_module+0x15db/0x16f3
[<c016406e>] vma_prio_tree_insert+0x17/0x2a
[<f897b000>] alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[<c01e6c92>] pci_bus_read_config_byte+0x0/0x61
[<c0103e5e>] sysenter_past_esp+0x6b/0xa1
=======================
hda: set_drive_speed_status: status=0xd0 { Busy }
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
usb 4-2: new full speed USB device using uhci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
usb 3-2: new low speed USB device using uhci_hcd and address 4
hda_codec: STAC922x, Apple subsys_id=106b0800
usb 3-2: configuration #1 chosen from 1 choice
<...usb and input initialisation...>
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: ATAPI CD-ROM drive, 0kB Cache
Uniform CD-ROM driver Revision: 3.20
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1804]
Pid: 1804, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f89e6dfb>] EFLAGS: 00000202 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 000001f7
ESI: f89f9f78 EDI: f89f9f20 EBP: ffff1346 ESP: f76ddb30
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7e0e0a0 CR3: 37702000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f89e7262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f89e7e09>] ide_wait_stat+0x45/0x72 [ide_core]
[<f89e5fe0>] ide_do_request+0x3ef/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f89e5c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d5c9a>] __blk_put_request+0x24/0x75
[<f89e661b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
[<f8b85289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<f8b85289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<c02bc8e2>] schedule+0x588/0x5ec
[<c01f7560>] vgacon_scroll+0x182/0x19d
[<f8b85498>] cdrom_read_capacity+0x57/0x85 [ide_cd]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f8b861d3>] cdrom_read_toc+0x94/0x3ff [ide_cd]
[<f89ed7bf>] __ide_add_setting+0xb6/0xd3 [ide_core]
[<f89edb09>] ide_add_setting+0x48/0x4d [ide_core]
[<f8b86e58>] ide_cd_probe+0x91a/0x947 [ide_cd]
[<c01884d0>] iput+0x39/0x62
[<c01b1783>] sysfs_addrm_finish+0x4a/0x194
[<c01b155b>] sysfs_add_one+0xaf/0xb8
[<c01b15b4>] sysfs_addrm_start+0x50/0x81
[<c01b20f3>] sysfs_create_link+0xb8/0xfd
[<c02729e2>] netlink_broadcast+0x261/0x2a1
[<f89e4054>] generic_ide_probe+0x1c/0x1d [ide_core]
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
etc....
-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-6) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Sat Apr 19 00:37:55 UTC 2008
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92 tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-1-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
--- End Message ---
--- Begin Message ---
Version: 2.6.25-1
On Sat, May 24, 2008 at 12:02:57PM +0200, Fabrice Lorrain wrote:
> Hello Maximilian,
>
> This bug can be closed, I wasn't able to reproduce the crash since my
> uppgrade to 2.6.25, a couple of weeks ago.
>
> Thanks.
>
> @+,
> Fab
thanks for feedback, closing with appropriate versioning info.
happy to hear that.
--
maks
--- End Message ---
Reply to: