Bug#482074: linux-2.6: system freeze with 2.6.25-1-686 (3x)
Package: linux-2.6
Severity: normal
While running linux-image-2.6.25-1-686 and 2-686 I had 3 system freezes in the 9 days I ran 2.6.25.
I then went back to 2.6.24-1-686.
System halts: there is no kbd, no mouse, vcstime stops marking the time. Sound loops on the last bytes received, apparently.
I was in X and had 3 or so VT's open. Once I was installing VMware and twice I was running rsync from a USB-HDD to an ATA drive.
Nothing shows in the logs.
I haven't had this since I bought this motherboard 3 years ago.
I realize this is not enough information, but Debian kernels never freeze on me.
I include the output of hwinfo --short, for whatever it's worth:
===============================================================================================
/home/hugoTue May 20-11:03:19SDA6# hwinfo --short
cpu:
AMD Athlon(tm) , 2000 MHz
keyboard:
/dev/input/event0 AT Translated Set 2 keyboard
/dev/input/event1 AT Raw Set 2 keyboard
mouse:
/dev/input/mice A4 Tech USB Optical Mouse
/dev/input/mice A4 Tech USB Optical Mouse
monitor:
Samsun SyncMaster 753DFX
graphics card:
nVidia GeForce4 MX 4000
sound:
EPoX VT8233/A/8235/8237 AC97 Audio Controller
Creative SB0410 SBLive! 24-bit
storage:
Floppy disk controller
VIA VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
EPoX VIA VT6420 SATA RAID Controller
network:
eth0 EPoX VT6103
network interface:
ppp0 Network Interface
vmnet1 Ethernet network interface
vmnet8 Ethernet network interface
eth0 Ethernet network interface
lo Loopback network interface
disk:
/dev/sdb WDC WD80 0JD-60LUA0
/dev/sda ST380211 0A
/dev/hdc ST380011A
/dev/hda Maxtor 6Y080P0
partition:
/dev/sdb1 Partition
/dev/sdb2 Partition
/dev/sdb3 Partition
/dev/sdb4 Partition
/dev/sdb5 Partition
/dev/sdb6 Partition
/dev/sdb7 Partition
/dev/sda1 Partition
/dev/sda2 Partition
/dev/sda3 Partition
/dev/sda4 Partition
/dev/sda5 Partition
/dev/sda6 Partition
/dev/sda7 Partition
/dev/hdc1 Partition
/dev/hdc2 Partition
/dev/hdc3 Partition <-----This partition has 2.6.25-2-686 installed and got the freezes
/dev/hdc4 Partition
/dev/hdc5 Partition
/dev/hdc6 Partition
/dev/hdc7 Partition
/dev/hda1 Partition
/dev/hda2 Partition
/dev/hda5 Partition
/dev/hda6 Partition
/dev/hda7 Partition
/dev/hda8 Partition
/dev/hda9 Partition
/dev/hda10 Partition
cdrom:
/dev/hdd LITE-ON DVDRW SHW-160P6S
usb controller:
VIA USB 2.0
VIA VT82xxxxx UHCI USB 1.1 Controller
VIA VT82xxxxx UHCI USB 1.1 Controller
VIA VT82xxxxx UHCI USB 1.1 Controller
VIA VT82xxxxx UHCI USB 1.1 Controller
bios:
BIOS
bridge:
EPoX VT8237 ISA bridge [KT600/K8T800/K8T890 South]
VIA VT8237 PCI Bridge
VIA KT880 Host Bridge
VIA KT880 Host Bridge
VIA KT880 Host Bridge
VIA KT880 Host Bridge
VIA KT880 Host Bridge
VIA KT880 Host Bridge
hub:
D-Link Hub
Linux 2.6.24-1-686 ehci_hcd EHCI Host Controller
Linux 2.6.24-1-686 uhci_hcd UHCI Host Controller
Linux 2.6.24-1-686 uhci_hcd UHCI Host Controller
Linux 2.6.24-1-686 uhci_hcd UHCI Host Controller
Linux 2.6.24-1-686 uhci_hcd UHCI Host Controller
memory:
Main Memory
unknown:
FPU
DMA controller
PIC
Timer
RTC
Keyboard controller
/dev/lp0 Parallel controller
PS/2 Controller
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
/dev/ttyS0 16550A
American Power Conversion Back-UPS Pro 500
==============================================================================================
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core; PREEMPT)
Locale: LANG=en_US.ISO-8859-15, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Reply to: