--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.18-3-k7: kernel hangs when acpi=off is specified
- From: Andree Leidenfrost <andree@debian.org>
- Date: Sun, 14 Jan 2007 20:47:55 +1100
- Message-id: <20070114094755.7323.35674.reportbug@aurich3.ostfriesland>
- Reply-to: Andree Leidenfrost <andree@debian.org>
Package: linux-image-2.6.18-3-k7
Version: 2.6.18-8
Severity: important
Dear kernel maintainers,
2.6.18-3-k7 hangs if 'apci=off' is specified as a boot parameter. The
hanging occurs at different stages of the boot process, e.g.:
[...]
Begin: Running /scripts/init-premount...
FATAL: Error inserting fan
(/lib/modules/2.6.18-3-k7/kernel/drivers/acpi/fan.ko)
: No such device
FATAL: Error inserting thermal
(/lib/modules/2.6.18-3-k7/kernel/drivers/acpi/the
rmal.ko): No such device
_
or
[...]
Setting console screen modes and fonts.
Setting up general console font...
or
[...]
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...
The issue does not occur with 2.6.17 or earlier nor with 2.6.18-3-486
nor with 2.6.18-3-amd64 (i.e. on amd64).
I'm on the follwojg hardware:
Board: ASUS A8V Deluxe
BIOS: Revision 1017
CPU: Athlon64 X2 4800+
lspci gives:
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800/K8T890 South]
00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
00:09.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev
01)
00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller (rev 13)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem
Controller (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon
9600]
01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600]
(Secondary)
#389931 (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=389931) might
be related to this.
Please let me know if you need any more information or you want me to
test anything.
Best regards & thanks a lot,
Andree
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-k7
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.18-3-k7 depends on:
ii coreutils 5.97-5.2 The GNU core utilities
ii debconf [debconf-2.0] 1.5.11 Debian configuration management sy
ii initramfs-tools [linux-initra 0.85e tools for generating an initramfs
ii module-init-tools 3.3-pre4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.18-3-k7 recommends:
ii libc6-i686 2.3.6.ds1-10 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.18-3-k7/postinst/depmod-error-initrd-2.6.18-3-k7: false
linux-image-2.6.18-3-k7/postinst/old-system-map-link-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/postinst/old-initrd-link-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/postinst/depmod-error-2.6.18-3-k7: false
linux-image-2.6.18-3-k7/postinst/kimage-is-a-directory:
linux-image-2.6.18-3-k7/prerm/removing-running-kernel-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/postinst/bootloader-error-2.6.18-3-k7:
linux-image-2.6.18-3-k7/preinst/elilo-initrd-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/postinst/old-dir-initrd-link-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/overwriting-modules-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/lilo-has-ramdisk:
linux-image-2.6.18-3-k7/preinst/abort-install-2.6.18-3-k7:
linux-image-2.6.18-3-k7/preinst/bootloader-initrd-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/lilo-initrd-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/abort-overwrite-2.6.18-3-k7:
* linux-image-2.6.18-3-k7/preinst/already-running-this-2.6.18-3-k7:
linux-image-2.6.18-3-k7/prerm/would-invalidate-boot-loader-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/failed-to-move-modules-2.6.18-3-k7:
linux-image-2.6.18-3-k7/postinst/create-kimage-link-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/initrd-2.6.18-3-k7:
linux-image-2.6.18-3-k7/postinst/bootloader-test-error-2.6.18-3-k7:
--- End Message ---