Bug#476890: NFSv4 crash with 2.6.25 and superkaramba
Today a crash with 2.6.25 happened, when I tried to start superkaramba (in
some distance to the last resuming)!
Cheers,
dunsens
ontext!
[71247.947580] ACPI handle has no context!
[71247.947580] ACPI: PCI interrupt for device 0000:01:04.2 disabled
[71247.947580] ACPI handle has no context!
[71247.962562] ACPI handle has no context!
[71247.986734] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[71248.000553] ACPI handle has no context!
[71248.000578] ACPI handle has no context!
[71248.016623] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[71248.016667] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[71248.016711] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[71248.016762] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[71248.016794] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[71248.048289] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[71248.065178] ACPI: Preparing to enter system sleep state S4
[71248.065474] Disabling non-boot CPUs ...
[71248.065487] CPU0 attaching NULL sched-domain.
[71248.065490] CPU1 attaching NULL sched-domain.
[71248.080190] CPU 1 is now offline
[71248.080192] SMP alternatives: switching to UP code
[71248.082410] CPU0 attaching sched-domain:
[71248.082413] domain 0: span 01
[71248.082414] groups: 01
[71248.082587] CPU1 is down
[71248.082761] PM: Creating hibernation image:
[71248.084181] PM: Need to copy 95382 pages
[71248.084181] Intel machine check architecture supported.
[71248.084181] Intel machine check reporting enabled on CPU#0.
[71248.084181] Enabling non-boot CPUs ...
[71248.084181] CPU0 attaching NULL sched-domain.
[71248.084181] SMP alternatives: switching to SMP code
[71248.084184] Booting processor 1/1 ip 4000
[73361.438107] Initializing CPU#1
[73361.438107] Calibrating delay using timer specific routine.. 4000.38 BogoMIPS (lpj=8000775)
[73361.438107] CPU: L1 I cache: 32K, L1 D cache: 32K
[73361.438107] CPU: L2 cache: 4096K
[73361.438107] CPU: Physical Processor ID: 0
[73361.438107] CPU: Processor Core ID: 1
[73361.438107] Intel machine check architecture supported.
[73361.438107] Intel machine check reporting enabled on CPU#1.
[71248.172865] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[71248.172917] CPU0 attaching sched-domain:
[71248.172920] domain 0: span 03
[71248.172922] groups: 01 02
[71248.172925] CPU1 attaching sched-domain:
[71248.172926] domain 0: span 03
[71248.172927] groups: 02 01
[73361.438107] CPU1 is up
[73361.438112] Switched to high resolution mode on CPU 1
[71248.314153] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[71248.314159] PCI: Setting latency timer of device 0000:00:02.0 to 64
[71248.324947] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[71248.324977] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
[71248.324987] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[71248.325091] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[71248.325176] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[71248.325269] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[71248.325278] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[71248.325283] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[71248.325332] usb usb1: root hub lost power or was reset
[71248.325360] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[71248.325365] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[71248.325413] usb usb2: root hub lost power or was reset
[71248.325430] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[71248.325435] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[71248.325483] usb usb3: root hub lost power or was reset
[71248.325500] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[71248.325505] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[71248.325552] usb usb4: root hub lost power or was reset
[71248.325580] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[71248.325585] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[71248.325630] usb usb5: root hub lost power or was reset
[71248.329675] ehci_hcd 0000:00:1d.7: debug port 1
[71248.329681] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[71248.449106] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[71248.449177] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[71248.464671] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100400, writing 100407)
[71248.480579] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[71248.489639] r8169: eth0: link down
[71248.504437] PM: Writing back config space on device 0000:01:04.0 at offset f (was 100, writing 105)
[71248.504463] PM: Writing back config space on device 0000:01:04.0 at offset 5 (was 0, writing ff1fe000)
[71248.504471] PM: Writing back config space on device 0000:01:04.0 at offset 4 (was 0, writing ff100000)
[71248.504479] PM: Writing back config space on device 0000:01:04.0 at offset 3 (was 800000, writing 804008)
[71248.504490] PM: Writing back config space on device 0000:01:04.0 at offset 1 (was 2100080, writing 2180017)
[71248.591775] ACPI: PCI Interrupt 0000:01:04.2[A] -> GSI 16 (level, low) -> IRQ 16
[71249.956549] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[71250.052598] hda: UDMA/100 mode selected
[71250.292100] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[71250.292100] hdb: UDMA/33 mode selected
[71250.324976] Restarting tasks ... <6>usb 1-1: USB disconnect, address 8
[71250.329625] done.
[71250.614621] usb 1-1: new low speed USB device using uhci_hcd and address 10
[71250.796212] usb 1-1: configuration #1 chosen from 1 choice
[71250.813304] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as /class/input/input14
[71250.816095] input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.0-1
[71250.901261] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as /class/input/input15
[71250.901261] input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.0-1
[71250.901261] usb 1-1: New USB device found, idVendor=045e, idProduct=009d
[71250.901261] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[71250.901261] usb 1-1: Product: Microsoft Wireless Optical Desktop® 2.10
[71250.901261] usb 1-1: Manufacturer: Microsoft
[71250.901261] usb 1-2: USB disconnect, address 9
[71251.134725] usb 1-2: new full speed USB device using uhci_hcd and address 11
[71251.304130] usb 1-2: configuration #1 chosen from 1 choice
[71251.305813] usb 1-2: New USB device found, idVendor=04a9, idProduct=220d
[71251.305813] usb 1-2: New USB device strings: Mfr=64, Product=77, SerialNumber=0
[71251.305813] usb 1-2: Product: CanoScan
[71251.305813] usb 1-2: Manufacturer: Canon
[71251.305813] usb 4-2: USB disconnect, address 4
[71251.785754] usb 4-2: new full speed USB device using uhci_hcd and address 5
[71251.973921] usb 4-2: configuration #1 chosen from 1 choice
[71251.979132] usb 4-2: New USB device found, idVendor=0a12, idProduct=0001
[71251.979135] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[71374.618387] wlan0: deauthenticate(reason=3)
[71374.730074] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[73490.992755] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[73490.992919] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100002, writing 100006)
[71376.243460] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[71378.767350] wlan0: Initial auth_alg=0
[71378.767350] wlan0: authenticate with AP 00:04:0e:97:1b:d7
[71378.768045] wlan0: Initial auth_alg=0
[71378.768045] wlan0: authenticate with AP 00:04:0e:97:1b:d7
[71378.768285] wlan0: RX authentication from 00:04:0e:97:1b:d7 (alg=0 transaction=2 status=0)
[71378.768285] wlan0: authenticated
[71378.768285] wlan0: associate with AP 00:04:0e:97:1b:d7
[71378.770508] wlan0: authentication frame received from 00:04:0e:97:1b:d7, but not in authenticate state - ignored
[71378.772219] wlan0: RX AssocResp from 00:04:0e:97:1b:d7 (capab=0x451 status=0 aid=1)
[71378.772219] wlan0: associated
[71378.772219] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[71388.662873] wlan0: no IPv6 routers present
[71407.457101] CIFS VFS: No response for cmd 50 mid 21909
[76499.738299] Syncing filesystems ... done.
[76499.738371] Freezing user space processes ... (elapsed 0.10 seconds) done.
[76499.846012] Freezing remaining freezable tasks ... (elapsed 7.33 seconds) done.
[76507.183521] PM: Shrinking memory... -\|/-\|done (74076 pages freed)
[78834.224852] PM: Freed 296304 kbytes in 2.67 seconds (110.97 MB/s)
[78834.224855] Suspending console(s)
[76509.771966] drm_sysfs_suspend
[76510.821413] ACPI handle has no context!
[76510.821413] ACPI handle has no context!
[76510.821413] ACPI: PCI interrupt for device 0000:01:04.2 disabled
[76510.821413] ACPI handle has no context!
[76510.836335] ACPI handle has no context!
[76510.860515] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[76510.874321] ACPI handle has no context!
[76510.874345] ACPI handle has no context!
[76510.890357] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[76510.890400] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[76510.890444] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[76510.890491] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[76510.890523] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[76510.922126] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[76510.939004] ACPI: Preparing to enter system sleep state S4
[76510.939300] Disabling non-boot CPUs ...
[76510.939313] CPU0 attaching NULL sched-domain.
[76510.939316] CPU1 attaching NULL sched-domain.
[76510.958023] CPU 1 is now offline
[76510.958026] SMP alternatives: switching to UP code
[76510.960170] CPU0 attaching sched-domain:
[76510.960173] domain 0: span 01
[76510.960174] groups: 01
[76510.960347] CPU1 is down
[76510.960520] PM: Creating hibernation image:
[76510.962013] PM: Need to copy 101322 pages
[76510.962013] Intel machine check architecture supported.
[76510.962013] Intel machine check reporting enabled on CPU#0.
[76510.962013] Enabling non-boot CPUs ...
[76510.962013] CPU0 attaching NULL sched-domain.
[76510.962013] SMP alternatives: switching to SMP code
[76510.962017] Booting processor 1/1 ip 4000
[78835.505746] Initializing CPU#1
[78835.505746] Calibrating delay using timer specific routine.. 4000.39 BogoMIPS (lpj=8000796)
[78835.505746] CPU: L1 I cache: 32K, L1 D cache: 32K
[78835.505746] CPU: L2 cache: 4096K
[78835.505746] CPU: Physical Processor ID: 0
[78835.505746] CPU: Processor Core ID: 1
[78835.505746] Intel machine check architecture supported.
[78835.505746] Intel machine check reporting enabled on CPU#1.
[76511.050719] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[76511.050775] CPU0 attaching sched-domain:
[76511.050777] domain 0: span 03
[76511.050779] groups: 01 02
[76511.050782] CPU1 attaching sched-domain:
[76511.050783] domain 0: span 03
[76511.050785] groups: 02 01
[78835.505746] CPU1 is up
[78835.505751] Switched to high resolution mode on CPU 1
[76511.187302] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[76511.187309] PCI: Setting latency timer of device 0000:00:02.0 to 64
[76511.198443] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[76511.198472] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
[76511.198482] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[76511.293882] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[76511.293988] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[76511.294081] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[76511.294094] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[76511.294099] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[76511.294155] usb usb1: root hub lost power or was reset
[76511.294186] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[76511.294194] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[76511.294245] usb usb2: root hub lost power or was reset
[76511.294265] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[76511.294271] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[76511.294324] usb usb3: root hub lost power or was reset
[76511.294345] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[76511.294350] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[76511.294404] usb usb4: root hub lost power or was reset
[76511.294436] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[76511.294444] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[76511.294496] usb usb5: root hub lost power or was reset
[76511.298541] ehci_hcd 0000:00:1d.7: debug port 1
[76511.298547] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[76511.417982] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[76511.418053] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[76511.433446] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100400, writing 100407)
[76511.449354] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[76511.458376] r8169: eth0: link down
[76511.473212] PM: Writing back config space on device 0000:01:04.0 at offset f (was 100, writing 105)
[76511.473238] PM: Writing back config space on device 0000:01:04.0 at offset 5 (was 0, writing ff1fe000)
[76511.473246] PM: Writing back config space on device 0000:01:04.0 at offset 4 (was 0, writing ff100000)
[76511.473254] PM: Writing back config space on device 0000:01:04.0 at offset 3 (was 800000, writing 804008)
[76511.473264] PM: Writing back config space on device 0000:01:04.0 at offset 1 (was 2100080, writing 2180017)
[76511.560431] ACPI: PCI Interrupt 0000:01:04.2[A] -> GSI 16 (level, low) -> IRQ 16
[76512.925424] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[76513.018692] hda: UDMA/100 mode selected
[76513.643299] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[76513.643299] hdb: UDMA/33 mode selected
[76513.675503] Restarting tasks ... <6>usb 1-1: USB disconnect, address 10
[76513.679008] done.
[76513.949461] usb 1-1: new low speed USB device using uhci_hcd and address 12
[76514.130142] usb 1-1: configuration #1 chosen from 1 choice
[76514.146625] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as /class/input/input16
[76514.146625] input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.0-1
[76514.231165] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as /class/input/input17
[76514.242852] input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.0-1
[76514.242968] usb 1-1: New USB device found, idVendor=045e, idProduct=009d
[76514.242973] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[76514.242977] usb 1-1: Product: Microsoft Wireless Optical Desktop® 2.10
[76514.242981] usb 1-1: Manufacturer: Microsoft
[76514.243002] usb 1-2: USB disconnect, address 11
[76514.478393] usb 1-2: new full speed USB device using uhci_hcd and address 13
[76514.648407] usb 1-2: configuration #1 chosen from 1 choice
[76514.650208] usb 1-2: New USB device found, idVendor=04a9, idProduct=220d
[76514.650208] usb 1-2: New USB device strings: Mfr=64, Product=77, SerialNumber=0
[76514.650208] usb 1-2: Product: CanoScan
[76514.650208] usb 1-2: Manufacturer: Canon
[76514.650208] usb 4-2: USB disconnect, address 5
[76514.881061] usb 4-2: new full speed USB device using uhci_hcd and address 6
[76515.069699] usb 4-2: configuration #1 chosen from 1 choice
[76515.073664] usb 4-2: New USB device found, idVendor=0a12, idProduct=0001
[76515.073667] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[76545.601692] CIFS VFS: server not responding
[76545.601702] CIFS VFS: No response to cmd 46 mid 23208
[76545.601709] CIFS VFS: Send error in read = -11
[76558.292979] wlan0: deauthenticate(reason=3)
[76558.371326] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[76559.456682] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[76559.456839] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100002, writing 100006)
[76559.499055] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[76562.010754] wlan0: Initial auth_alg=0
[76562.010754] wlan0: authenticate with AP 00:04:0e:97:1b:d7
[76562.012625] wlan0: RX authentication from 00:04:0e:97:1b:d7 (alg=0 transaction=2 status=0)
[76562.012632] wlan0: authenticated
[76562.012637] wlan0: associate with AP 00:04:0e:97:1b:d7
[76562.016339] wlan0: RX AssocResp from 00:04:0e:97:1b:d7 (capab=0x451 status=0 aid=1)
[76562.016345] wlan0: associated
[76562.016706] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[76572.513503] wlan0: no IPv6 routers present
[76587.413344] nfs4_reclaim_open_state: Lock reclaim failed!
[76587.519094] nfs4_reclaim_open_state: Lock reclaim failed!
[134908.355486] Syncing filesystems ... done.
[134908.355555] Freezing user space processes ... (elapsed 0.00 seconds) done.
[134908.356501] Freezing remaining freezable tasks ... (elapsed 0.07 seconds) done.
[134908.426839] PM: Shrinking memory... -\|/-\|/-\|/-\done (125535 pages freed)
[138734.055285] PM: Freed 502140 kbytes in 3.30 seconds (152.16 MB/s)
[138734.055288] Suspending console(s)
[134911.527149] drm_sysfs_suspend
[134912.688398] ACPI handle has no context!
[134912.688398] ACPI handle has no context!
[134912.688398] ACPI: PCI interrupt for device 0000:01:04.2 disabled
[134912.688398] ACPI handle has no context!
[134912.702776] ACPI handle has no context!
[134912.727081] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[134912.740896] ACPI handle has no context!
[134912.740921] ACPI handle has no context!
[134912.756966] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[134912.757010] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[134912.757054] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[134912.757106] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[134912.757138] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[134912.788632] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[134912.805508] ACPI: Preparing to enter system sleep state S4
[134912.805804] Disabling non-boot CPUs ...
[134912.805816] CPU0 attaching NULL sched-domain.
[134912.805819] CPU1 attaching NULL sched-domain.
[134912.820529] CPU 1 is now offline
[134912.820532] SMP alternatives: switching to UP code
[134912.822745] CPU0 attaching sched-domain:
[134912.822748] domain 0: span 01
[134912.822749] groups: 01
[134912.822924] CPU1 is down
[134912.823099] PM: Creating hibernation image:
[134912.824521] PM: Need to copy 100056 pages
[134912.824521] Intel machine check architecture supported.
[134912.824521] Intel machine check reporting enabled on CPU#0.
[134912.824521] Enabling non-boot CPUs ...
[134912.824521] CPU0 attaching NULL sched-domain.
[134912.824521] SMP alternatives: switching to SMP code
[134912.824525] Booting processor 1/1 ip 4000
[138735.449025] Initializing CPU#1
[138735.449025] Calibrating delay using timer specific routine.. 4000.37 BogoMIPS (lpj=8000744)
[138735.449025] CPU: L1 I cache: 32K, L1 D cache: 32K
[138735.449025] CPU: L2 cache: 4096K
[138735.449025] CPU: Physical Processor ID: 0
[138735.449025] CPU: Processor Core ID: 1
[138735.449025] Intel machine check architecture supported.
[138735.449025] Intel machine check reporting enabled on CPU#1.
[134912.913208] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[134912.913261] CPU0 attaching sched-domain:
[134912.913264] domain 0: span 03
[134912.913265] groups: 01 02
[134912.913268] CPU1 attaching sched-domain:
[134912.913270] domain 0: span 03
[134912.913271] groups: 02 01
[138735.449025] CPU1 is up
[138735.449031] Switched to high resolution mode on CPU 1
[134913.058601] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[134913.058607] PCI: Setting latency timer of device 0000:00:02.0 to 64
[134913.068806] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[134913.068836] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
[134913.068846] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[134913.068951] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[134913.069036] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[134913.069129] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[134913.069137] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[134913.069142] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[134913.069192] usb usb1: root hub lost power or was reset
[134913.069220] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[134913.069225] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[134913.069273] usb usb2: root hub lost power or was reset
[134913.069290] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[134913.069295] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[134913.069343] usb usb3: root hub lost power or was reset
[134913.069360] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[134913.069365] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[134913.069413] usb usb4: root hub lost power or was reset
[134913.069441] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[134913.069447] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[134913.069491] usb usb5: root hub lost power or was reset
[134913.073543] ehci_hcd 0000:00:1d.7: debug port 1
[134913.073549] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[134913.193060] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[134913.193131] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[134913.208614] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100400, writing 100407)
[134913.224524] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[134913.233468] r8169: eth0: link down
[134913.248420] PM: Writing back config space on device 0000:01:04.0 at offset f (was 100, writing 105)
[134913.248446] PM: Writing back config space on device 0000:01:04.0 at offset 5 (was 0, writing ff1fe000)
[134913.248454] PM: Writing back config space on device 0000:01:04.0 at offset 4 (was 0, writing ff100000)
[134913.248463] PM: Writing back config space on device 0000:01:04.0 at offset 3 (was 800000, writing 804008)
[134913.248473] PM: Writing back config space on device 0000:01:04.0 at offset 1 (was 2100080, writing 2180017)
[134913.335769] ACPI: PCI Interrupt 0000:01:04.2[A] -> GSI 16 (level, low) -> IRQ 16
[134914.700604] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[134914.796113] hda: UDMA/100 mode selected
[134915.307264] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[134915.307264] hdb: UDMA/33 mode selected
[138737.949993] Restarting tasks ... done.
[134915.377969] usb 1-1: USB disconnect, address 12
[134915.635504] usb 1-1: new low speed USB device using uhci_hcd and address 14
[134915.816607] usb 1-1: configuration #1 chosen from 1 choice
[134915.833135] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as /class/input/input18
[134915.833135] input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.0-1
[134915.918139] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as /class/input/input19
[134915.925839] input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.0-1
[134915.925951] usb 1-1: New USB device found, idVendor=045e, idProduct=009d
[134915.925956] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[134915.925961] usb 1-1: Product: Microsoft Wireless Optical Desktop® 2.10
[134915.925965] usb 1-1: Manufacturer: Microsoft
[134915.925985] usb 1-2: USB disconnect, address 13
[134916.161045] usb 1-2: new full speed USB device using uhci_hcd and address 15
[134916.326562] usb 1-2: configuration #1 chosen from 1 choice
[134916.328191] usb 1-2: New USB device found, idVendor=04a9, idProduct=220d
[134916.328191] usb 1-2: New USB device strings: Mfr=64, Product=77, SerialNumber=0
[134916.328191] usb 1-2: Product: CanoScan
[134916.328191] usb 1-2: Manufacturer: Canon
[134916.328191] usb 4-2: USB disconnect, address 6
[134916.561561] usb 4-2: new full speed USB device using uhci_hcd and address 7
[134916.750446] usb 4-2: configuration #1 chosen from 1 choice
[134916.754292] usb 4-2: New USB device found, idVendor=0a12, idProduct=0001
[134916.754295] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[134957.368960] wlan0: deauthenticate(reason=3)
[134957.478076] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[134958.655185] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[134958.655343] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100002, writing 100006)
[134958.698803] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[134961.202333] wlan0: Initial auth_alg=0
[134961.202343] wlan0: authenticate with AP 00:04:0e:97:1b:d7
[134961.204189] wlan0: RX authentication from 00:04:0e:97:1b:d7 (alg=0 transaction=2 status=0)
[134961.204197] wlan0: authenticated
[134961.204202] wlan0: associate with AP 00:04:0e:97:1b:d7
[134961.207596] wlan0: RX AssocResp from 00:04:0e:97:1b:d7 (capab=0x451 status=0 aid=2)
[134961.207604] wlan0: associated
[134961.208068] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[134971.349974] wlan0: no IPv6 routers present
[134984.281571] nfs4_reclaim_open_state: Lock reclaim failed!
[135020.618331] CIFS VFS: No response for cmd 50 mid 48837
[135075.682074] ------------[ cut here ]------------
[135075.682080] kernel BUG at fs/nfs/nfs4xdr.c:972!
[135075.682082] invalid opcode: 0000 [#1] SMP
[135075.682085] Modules linked in: appletalk ax25 ipx p8023 i915 drm nls_utf8 cifs nls_base binfmt_misc nfnetlink_queue rfcomm l2cap ip6table_filter ip6_tables iptable_raw xt_comment xt_policy ipt_ULOG ipt_TTL ipt_ttl ipt_REJECT ipt_REDIRECT ipt_recent ipt_NETMAP ipt_MASQUERADE ipt_LOG ipt_ECN ipt_ecn ipt_CLUSTERIP ipt_ah ipt_addrtype nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_pptp nf_nat_proto_gre nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat_amanda ts_kmp nf_conntrack_amanda nf_conntrack_tftp nf_conntrack_sip nf_conntrack_proto_sctp nf_conntrack_pptp nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_netbios_ns nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp xt_tcpmss xt_pkttype xt_physdev xt_owner xt_NFQUEUE xt_NFLOG xt_multiport xt_MARK xt_mark xt_mac xt_limit xt_length xt_iprange xt_helper xt_hashlimit xt_DSCP xt_dscp xt_dccp xt_conntrack xt_CONNMARK xt_connmark xt_CLASSIFY xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle nfnetlink iptable_filter ip_tables x_tables ppdev parport_pc lp parport acpi_cpufreq cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_userspace freq_table cpufreq_powersave microcode rpcsec_gss_krb5 auth_rpcgss nfs lockd nfs_acl sunrpc ipv6 fuse coretemp loop firewire_sbp2 arc4 ecb snd_hda_intel snd_pcm_oss iwl3945 snd_pcm snd_mixer_oss sdhci firmware_class rtc i2c_i801 hci_usb snd_seq_dummy snd_seq_oss mac80211 mmc_core rng_core serio_raw pcspkr bluetooth battery i2c_core psmouse iTCO_wdt snd_seq_midi ac cfg80211 video output snd_rawmidi snd_seq_midi_event snd_seq intel_agp snd_timer snd_seq_device snd soundcore snd_page_alloc button agpgart joydev evdev ext3 jbd mbcache sha256_generic aes_i586 aes_generic cbc dm_crypt crypto_blkcipher dm_mirror dm_snapshot dm_mod raid10 usbhid hid ff_memless raid456 async_xor async_memcpy async_tx xor raid1 raid0 multipath linear md_mod ide_cd_mod cdrom ide_disk ata_generic libata scsi_mod dock piix firewire_ohci firewire_core crc_itu_t ide_pci_generic ide_core ehci_hcd uhci_hcd usbcore r8169 thermal processor fan
[135075.682225]
[135075.682228] Pid: 13024, comm: superkaramba Not tainted (2.6.25-1-686 #1)
[135075.682230] EIP: 0060:[<f91be5a9>] EFLAGS: 00210297 CPU: 0
[135075.682261] EIP is at encode_share_access+0x48/0x4c [nfs]
[135075.682263] EAX: c8f390b8 EBX: 00000080 ECX: f4b07d00 EDX: ffffffff
[135075.682265] ESI: f4b07d00 EDI: f4b07d00 EBP: efa65594 ESP: f4b07cd8
[135075.682268] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[135075.682270] Process superkaramba (pid: 13024, ti=f4b06000 task=e9a1b8f0 task.ti=f4b06000)
[135075.682272] Stack: c8d5b004 f91c08e4 c8f3907c c8d5b004 f4b07d00 f91c0b59 00000000 00000007
[135075.682278] 00000000 00000000 c8f390c0 efa65598 c8f39448 efa65598 00000000 eff66cc0
[135075.682284] efa65594 f91c0aff f913aa50 efa65594 eff66cc0 efa65594 f91c0aff f91343fe
[135075.682290] Call Trace:
[135075.682323] [<f91c08e4>] encode_open+0x38/0x1ee [nfs]
[135075.682401] [<f91c0b59>] nfs4_xdr_enc_open+0x5a/0x94 [nfs]
[135075.682591] [<f91c0aff>] nfs4_xdr_enc_open+0x0/0x94 [nfs]
[135075.682620] [<f913aa50>] rpcauth_wrap_req+0x62/0x70 [sunrpc]
[135075.682698] [<f91c0aff>] nfs4_xdr_enc_open+0x0/0x94 [nfs]
[135075.682727] [<f91343fe>] call_transmit+0x18c/0x1e5 [sunrpc]
[135075.682843] [<f9139aa5>] __rpc_execute+0x65/0x1e7 [sunrpc]
[135075.682917] [<f9134a59>] rpc_run_task+0x40/0x45 [sunrpc]
[135075.682977] [<f91b7c83>] _nfs4_proc_open+0xae/0x259 [nfs]
[135075.683086] [<c011ae73>] try_to_wake_up+0xc7/0xd0
[135075.683230] [<f91c1474>] nfs_alloc_seqid+0x12/0x27 [nfs]
[135075.683277] [<f91b79f8>] nfs4_opendata_alloc+0x175/0x19b [nfs]
[135075.683437] [<f91b82dd>] nfs4_do_open+0x112/0x249 [nfs]
[135075.683583] [<f91ba862>] nfs4_proc_create+0x68/0x16a [nfs]
[135075.683583] [<f913a89a>] rpcauth_lookup_credcache+0x4d/0x1a1 [sunrpc]
[135075.683583] [<f91a6a24>] nfs_do_access+0x21/0x2a7 [nfs]
[135075.683583] [<f913a430>] put_rpccred+0x2b/0xbe [sunrpc]
[135075.683583] [<f91a6dca>] nfs_permission+0x120/0x129 [nfs]
[135075.683583] [<f91a6caa>] nfs_permission+0x0/0x129 [nfs]
[135075.683583] [<c01786b6>] permission+0xa3/0xef
[135075.683583] [<f913a89a>] rpcauth_lookup_credcache+0x4d/0x1a1 [sunrpc]
[135075.683583] [<f91a7e5c>] nfs_create+0x82/0xe3 [nfs]
[135075.683583] [<c0181268>] d_alloc+0x138/0x17a
[135075.683583] [<f91a6caa>] nfs_permission+0x0/0x129 [nfs]
[135075.683583] [<c01786b6>] permission+0xa3/0xef
[135075.683583] [<c0179ae7>] vfs_create+0xb4/0x117
[135075.683583] [<c017b254>] sys_mknodat+0xf7/0x161
[135075.683583] [<c0163e17>] remove_vma+0x31/0x36
[135075.683583] [<c0115b34>] do_page_fault+0x268/0x584
[135075.683583] [<c017b2d1>] sys_mknod+0x13/0x17
[135075.683583] [<c01047e4>] sysenter_past_esp+0x6d/0xa5
[135075.683583] =======================
[135075.683583] Code: 74 10 83 fa 03 74 13 4a 75 21 c7 00 00 00 00 01 eb 0e c7 00 00 00 00 02 eb 06 c7 00 00 00 00 03 83 c0 04 c7 00 00 00 00 00 5b c3 <0f> 0b eb fe ba 04 00 00 00 e8 a2 10 f8 ff 85 c0 75 04 0f 0b eb
[135075.683583] EIP: [<f91be5a9>] encode_share_access+0x48/0x4c [nfs] SS:ESP 0068:f4b07cd8
[135075.683715] ---[ end trace b5d354e78ea4be8a ]---
Reply to: