Bug#481125: linux-image-2.6.25-2-amd64: Freeze also happen with 2.6.25
Package: linux-image-2.6.25-2-amd64
Version: 2.6.25-2
Followup-For: Bug #481125
Hi,
I installed Grub and could test a complete boot with 2.6.25. The boot
process hanged at the same place:
[ 0.360232] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
=== freeze for about 10 min ===
[ 0.504047] Switched to high resolution mode on CPU 0
[ 0.542427] it is
[ 0.716065] Clocksource tsc unstable (delta = 299966260445 ns)
[ 0.739240] Freeing initrd memory: 5887k freed
tibob
-- Package-specific info:
** Version:
Linux version 2.6.25-2-amd64 (Debian 2.6.25-2) (waldi@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Sun May 11 23:52:11 UTC 2008
** Command line:
root=/dev/sda5 ro
** Not tainted
** Kernel log:
[ 2.630763] usb 7-6: Manufacturer: Generic
[ 2.630806] usb 7-6: SerialNumber: 058F412D8PB1
[ 2.836200] usb 2-1: new low speed USB device using uhci_hcd and address 4
[ 2.929150] input: PC Speaker as /class/input/input1
[ 3.208349] Initializing USB Mass Storage driver...
[ 3.230079] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.310503] input: Power Button (FF) as /class/input/input2
[ 3.336162] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 3.336277] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[ 3.336349] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.372313] ACPI: Power Button (FF) [PWRF]
[ 3.372404] input: Power Button (CM) as /class/input/input3
[ 3.432260] ACPI: Power Button (CM) [PWRB]
[ 3.505624] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 18
[ 3.836700] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 3.836806] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 4.392289] usb 2-1: unable to read config index 0 descriptor/start: -110
[ 4.392289] usb 2-1: chopping to 0 config(s)
[ 4.448292] usb 2-1: no configuration chosen from 0 choices
[ 4.448292] usb 2-1: New USB device found, idVendor=0463, idProduct=ffff
[ 4.448292] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 4.448292] usb 2-1: Product: PROTECTIONCENTER
[ 4.448292] usb 2-1: Manufacturer: MGE UPS SYSTEMS
[ 4.448292] usb 2-1: SerialNumber: 000000000
[ 4.464297] usb 7-4.1: new low speed USB device using ehci_hcd and address 5
[ 4.468297] usb 7-4.1: configuration #1 chosen from 1 choice
[ 4.468297] usb 7-4.1: New USB device found, idVendor=413c, idProduct=3012
[ 4.468297] usb 7-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.468300] usb 7-4.1: Product: Dell USB Optical Mouse
[ 4.468344] usb 7-4.1: Manufacturer: Dell
[ 4.628304] usb 7-4.2: new low speed USB device using ehci_hcd and address 6
[ 4.572303] usb 7-4.2: configuration #1 chosen from 1 choice
[ 4.572303] usb 7-4.2: New USB device found, idVendor=413c, idProduct=2003
[ 4.572303] usb 7-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.572303] usb 7-4.2: Product: Dell USB Keyboard
[ 4.572303] usb 7-4.2: Manufacturer: Dell
[ 4.728310] usb 7-4.4: new full speed USB device using ehci_hcd and address 7
[ 4.776313] usb 7-4.4: configuration #1 chosen from 1 choice
[ 4.776313] usb 7-4.4: New USB device found, idVendor=04b8, idProduct=010f
[ 4.776313] usb 7-4.4: New USB device strings: Mfr=64, Product=77, SerialNumber=0
[ 4.776313] usb 7-4.4: Product: EPSON Scanner 010F
[ 4.776313] usb 7-4.4: Manufacturer: EPSON
[ 4.776313] scsi4 : SCSI emulation for USB Mass Storage devices
[ 4.696311] usb-storage: device found at 4
[ 4.696311] usb-storage: waiting for device to settle before scanning
[ 4.776313] usbcore: registered new interface driver usb-storage
[ 4.776313] USB Mass Storage support registered.
[ 4.776313] usbcore: registered new interface driver hiddev
[ 4.777094] input: Dell Dell USB Optical Mouse as /class/input/input4
[ 4.832373] input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.7-4.1
[ 4.755272] input: Dell Dell USB Keyboard as /class/input/input5
[ 4.788349] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2
[ 4.788550] usbcore: registered new interface driver usbhid
[ 4.788595] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 6.045054] Adding 1951856k swap on /dev/sda9. Priority:-1 extents:1 across:1951856k
[ 6.061330] EXT3 FS on sda5, internal journal
[ 6.839283] loop: module loaded
[ 6.952203] coretemp coretemp.0: Using relative temperature scale!
[ 6.952283] coretemp coretemp.1: Using relative temperature scale!
[ 6.983206] it87: Found IT8718F chip at 0x290, revision 3
[ 6.983258] it87: in3 is VCC (+5V)
[ 6.983300] it87: in7 is VCCH (+5V Stand-By)
[ 7.410114] fuse init (API version 7.9)
[ 7.447897] kjournald starting. Commit interval 5 seconds
[ 7.592586] EXT3 FS on sda6, internal journal
[ 7.592665] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.468485] kjournald starting. Commit interval 5 seconds
[ 7.613170] EXT3 FS on sda7, internal journal
[ 7.613249] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.476486] kjournald starting. Commit interval 5 seconds
[ 7.632492] EXT3 FS on sda8, internal journal
[ 7.632492] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.481757] kjournald starting. Commit interval 5 seconds
[ 7.650450] EXT3 FS on sda10, internal journal
[ 7.650529] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.352694] usb-storage: device scan complete
[ 8.356803] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 8.357427] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 8.358050] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 8.358673] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 8.359421] scsi 4:0:0:4: Direct-Access Generic Mini SD Reader 1.06 PQ: 0 ANSI: 0
[ 8.360765] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 8.360837] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 8.382570] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 8.382643] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 8.387337] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 8.387408] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 8.388768] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 8.388840] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 8.390456] sd 4:0:0:4: [sdf] Attached SCSI removable disk
[ 8.390526] sd 4:0:0:4: Attached scsi generic sg6 type 0
[ 8.628904] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 8.628954] eth0: 10/100 speed: disabling TSO
[ 9.053649] NET: Registered protocol family 10
[ 9.053994] lo: Disabled Privacy Extensions
[ 11.219634] warning: `named' uses 32-bit capabilities (legacy support in use)
[ 11.684613] pnp: the driver 'parport_pc' has been registered
[ 11.773354] lp: driver loaded but no devices found
[ 11.808230] ppdev: user-space parallel port driver
[ 15.192971] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ppdev 13832 0
parport_pc 34344 0
lp 17540 0
parport 44848 3 ppdev,parport_pc,lp
ac 9344 0
battery 14208 0
ipv6 294120 36
nls_utf8 6528 2
cifs 229008 2
nls_base 13444 2 nls_utf8,cifs
fuse 53440 1
it87 31256 0
hwmon_vid 7680 1 it87
coretemp 13056 0
loop 23044 0
usbhid 49632 0
hid 44736 1 usbhid
ff_memless 10248 1 usbhid
snd_hda_intel 414296 2
snd_pcm_oss 46752 0
snd_pcm 88072 2 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 21376 1 snd_pcm_oss
snd_seq_dummy 8580 0
snd_seq_oss 36736 0
snd_seq_midi 13376 0
snd_rawmidi 31008 1 snd_seq_midi
snd_seq_midi_event 12544 2 snd_seq_oss,snd_seq_midi
snd_seq 58912 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29328 2 snd_pcm,snd_seq
snd_seq_device 12948 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 15260 0
serio_raw 11652 0
intel_agp 34160 0
iTCO_wdt 17360 0
i2c_core 30752 1 i2c_i801
button 13856 0
snd 66888 13 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 13088 1 snd
snd_page_alloc 15120 2 snd_hda_intel,snd_pcm
dcdbas 13616 0
usb_storage 94272 0
psmouse 45724 0
evdev 17408 3
pcspkr 7808 0
ext3 139280 5
jbd 55336 1 ext3
mbcache 13956 1 ext3
floppy 66984 0
ehci_hcd 40076 0
e1000e 101156 0
uhci_hcd 29472 0
sg 42464 0
sr_mod 23108 0
cdrom 39464 1 sr_mod
sd_mod 33728 7
thermal 26656 1
processor 49388 1 thermal
fan 10760 1
ata_piix 28676 7
libata 165808 1 ata_piix
scsi_mod 170360 5 usb_storage,sg,sr_mod,sd_mod,libata
dock 16288 1 libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 1278
Region 0: Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at fe00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at fd00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20)
Subsystem: Dell Device [1028:020d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fb00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fa00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f900 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20)
Subsystem: Dell Device [1028:020d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f800 [size=8]
Region 1: I/O ports at f700 [size=4]
Region 2: I/O ports at f600 [size=8]
Region 3: I/O ports at f500 [size=4]
Region 4: I/O ports at f400 [size=16]
Region 5: I/O ports at f300 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f100 [size=8]
Region 1: I/O ports at f000 [size=4]
Region 2: I/O ports at ef00 [size=8]
Region 3: I/O ports at ee00 [size=4]
Region 4: I/O ports at ed00 [size=16]
Region 5: I/O ports at ec00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8300 GS [10de:0423] (rev a1)
Subsystem: nVidia Corporation Device [10de:0494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cf00 [size=128]
Capabilities: <access denied>
Kernel modules: nvidiafb
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (100, 'unstable'), (5, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.25-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.25-2-amd64 recommends no packages.
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-amd64/preinst/abort-overwrite-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/prerm/removing-running-kernel-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/old-initrd-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/create-kimage-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/failed-to-move-modules-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/abort-install-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-amd64/postinst/depmod-error-2.6.25-2-amd64: false
linux-image-2.6.25-2-amd64/postinst/bootloader-test-error-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/postinst/old-system-map-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/prerm/would-invalidate-boot-loader-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/overwriting-modules-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/depmod-error-initrd-2.6.25-2-amd64: false
linux-image-2.6.25-2-amd64/postinst/old-dir-initrd-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/elilo-initrd-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/bootloader-error-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/lilo-initrd-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-amd64/preinst/initrd-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/bootloader-initrd-2.6.25-2-amd64: true
Reply to: