Bug#478765: BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1389]
Package: linux-image-2.6.24-1-686
Version: 2.6.24-6
Severity: normal
Hello,
I observe from time to time the following at cold or warm reboot on a
mac-mini (core 2 duo, cf. http://www.apple.com/macmini/specs.html).
I don't think the trouble is with the hardware (same box working fine
with OSX and Xubuntu-hardy in live mode)
Maybe related to #478278 and #464387.
I didn't see those pbs with 2.6.18-5-686 and -2.6.22-3-686.
Upgrading to linux-image-2.6.25-1-686 as suggested in #464387.
@+,
Fab
hda: PIONEER DVD-RW DVR-K06, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
hda: set_drive_speed_status: status=0xd0 { Busy }
hda: UDMA/33 mode selected
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1389]
Pid: 1389, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f89e6dfb>] EFLAGS: 00000212 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 000001f7
ESI: f89f9f78 EDI: f89f9f20 EBP: fffef992 ESP: f7673d68
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: f8c120e4 CR3: 3770c000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f89e7262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f89e7a4f>] ide_config_drive_speed+0xef/0x2ba [ide_core]
[<f89e86fe>] ide_set_dma_mode+0x42/0x55 [ide_core]
[<f89ec5d7>] ide_set_dma+0xe4/0x11a [ide_core]
[<f89e9717>] probe_hwif+0x62b/0x690 [ide_core]
[<f89e9fda>] ide_device_add+0x2e/0x9c [ide_core]
[<c011d47e>] __wake_up_common+0x32/0x5c
[<f89ebc9e>] ide_setup_pci_device+0x38/0x42 [ide_core]
[<c01eb7c7>] pci_device_probe+0x36/0x57
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
[<c0240dfa>] bus_for_each_dev+0x37/0x59
[<c0241687>] driver_attach+0x16/0x18
[<c0241930>] __driver_attach+0x0/0x79
[<c02410e0>] bus_add_driver+0x6d/0x197
[<c01eb904>] __pci_register_driver+0x48/0x74
[<f8ac009c>] piix_ide_init+0x9c/0xa0 [piix]
[<c0138ef2>] blocking_notifier_call_chain+0x17/0x1a
[<c0143721>] sys_init_module+0x15db/0x16f3
[<c016406e>] vma_prio_tree_insert+0x17/0x2a
[<f897b000>] alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[<c01e6c92>] pci_bus_read_config_byte+0x0/0x61
[<c0103e5e>] sysenter_past_esp+0x6b/0xa1
=======================
hda: set_drive_speed_status: status=0xd0 { Busy }
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1389]
Pid: 1389, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f89e6dfb>] EFLAGS: 00000202 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 000001f7
ESI: f89f9f78 EDI: f89f9f20 EBP: ffff0357 ESP: f7673d68
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: f8c120e4 CR3: 3770c000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f89e7262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f89e7a4f>] ide_config_drive_speed+0xef/0x2ba [ide_core]
[<f89e8769>] ide_set_pio_mode+0x58/0x6e [ide_core]
[<f89ec5f0>] ide_set_dma+0xfd/0x11a [ide_core]
[<f89e9717>] probe_hwif+0x62b/0x690 [ide_core]
[<f89e9fda>] ide_device_add+0x2e/0x9c [ide_core]
[<c011d47e>] __wake_up_common+0x32/0x5c
[<f89ebc9e>] ide_setup_pci_device+0x38/0x42 [ide_core]
[<c01eb7c7>] pci_device_probe+0x36/0x57
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
[<c0240dfa>] bus_for_each_dev+0x37/0x59
[<c0241687>] driver_attach+0x16/0x18
[<c0241930>] __driver_attach+0x0/0x79
[<c02410e0>] bus_add_driver+0x6d/0x197
[<c01eb904>] __pci_register_driver+0x48/0x74
[<f8ac009c>] piix_ide_init+0x9c/0xa0 [piix]
[<c0138ef2>] blocking_notifier_call_chain+0x17/0x1a
[<c0143721>] sys_init_module+0x15db/0x16f3
[<c016406e>] vma_prio_tree_insert+0x17/0x2a
[<f897b000>] alsa_card_azx_init+0x0/0x14 [snd_hda_intel]
[<c01e6c92>] pci_bus_read_config_byte+0x0/0x61
[<c0103e5e>] sysenter_past_esp+0x6b/0xa1
=======================
hda: set_drive_speed_status: status=0xd0 { Busy }
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
usb 4-2: new full speed USB device using uhci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
usb 3-2: new low speed USB device using uhci_hcd and address 4
hda_codec: STAC922x, Apple subsys_id=106b0800
usb 3-2: configuration #1 chosen from 1 choice
<...usb and input initialisation...>
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: ATAPI CD-ROM drive, 0kB Cache
Uniform CD-ROM driver Revision: 3.20
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1804]
Pid: 1804, comm: modprobe Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f89e6dfb>] EFLAGS: 00000202 CPU: 0
EIP is at ide_inb+0x3/0x7 [ide_core]
EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 000001f7
ESI: f89f9f78 EDI: f89f9f20 EBP: ffff1346 ESP: f76ddb30
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7e0e0a0 CR3: 37702000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
[<f89e7262>] __ide_wait_stat+0x91/0xee [ide_core]
[<f89e7e09>] ide_wait_stat+0x45/0x72 [ide_core]
[<f89e5fe0>] ide_do_request+0x3ef/0x976 [ide_core]
[<c01d34f9>] elv_queue_empty+0x1d/0x1e
[<f89e5c6e>] ide_do_request+0x7d/0x976 [ide_core]
[<c01d3686>] elv_drain_elevator+0x15/0x58
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d3f63>] elv_insert+0x107/0x1ea
[<c01d5c9a>] __blk_put_request+0x24/0x75
[<f89e661b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
[<f8b85289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<f8b85289>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
[<c02bc8e2>] schedule+0x588/0x5ec
[<c01f7560>] vgacon_scroll+0x182/0x19d
[<f8b85498>] cdrom_read_capacity+0x57/0x85 [ide_cd]
[<c01d5ea7>] blk_end_sync_rq+0x0/0x23
[<f8b861d3>] cdrom_read_toc+0x94/0x3ff [ide_cd]
[<f89ed7bf>] __ide_add_setting+0xb6/0xd3 [ide_core]
[<f89edb09>] ide_add_setting+0x48/0x4d [ide_core]
[<f8b86e58>] ide_cd_probe+0x91a/0x947 [ide_cd]
[<c01884d0>] iput+0x39/0x62
[<c01b1783>] sysfs_addrm_finish+0x4a/0x194
[<c01b155b>] sysfs_add_one+0xaf/0xb8
[<c01b15b4>] sysfs_addrm_start+0x50/0x81
[<c01b20f3>] sysfs_create_link+0xb8/0xfd
[<c02729e2>] netlink_broadcast+0x261/0x2a1
[<f89e4054>] generic_ide_probe+0x1c/0x1d [ide_core]
[<c0241820>] driver_probe_device+0xde/0x15c
[<c02bb9e5>] klist_next+0x4b/0x6c
[<c0241930>] __driver_attach+0x0/0x79
[<c0241976>] __driver_attach+0x46/0x79
etc....
-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-6) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Sat Apr 19 00:37:55 UTC 2008
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92 tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-1-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
Reply to: